Primers and Sealers
Old Masters Old Masters Sanding Sealer
Old Masters Sanding Sealer is designed to seal and protect wood surfaces and can be used to prepare surfaces for the application of a clear topcoat finish. Interior use Oil based
$34.99$27.99
-
Old Masters Old Masters Wood Conditioner
This is a pre-stain, low-VOC, clear wood sealer that enables uniform stain application on soft woods, such as fir, pine, or hemlock. Using this product helps to avoid the appearance of uneven, blotchy staining.
$89.99$24.99
-
Benjamin Moore Polyamide Epoxy
Polyamide Epoxy Coating is a multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and other industrial and commercial substrates requiring a durable coating in severe environments. Moderate- to heavy-duty performance in commercial/industrial environments exposed to intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning. Excellent for use on ferrous metals, non-ferrous metals and galvanized metal. This is a two component product that requires 1 part of the proper "A" component mixed with 1 part of part "B" catalyst. The components are already pre-measured to the proper mix ratio. No measuring required. Do not mix partial kits. 2 GALLON KIT (Includes A and B) Highly cross-linked film for toughness and durability Resists many chemicals and solvents Suitable For Use In USDA Inspected Facilities Suitable for immersion Medium build epoxy Recommended for: Corotech V400 Polyamide Epoxy is a multi-use epoxy designed for coating items including: Tanks Machinery Floors Structural members Walls Equipment Pools CERTIFICATIONS & QUALIFICATIONS: Suitable for Use in USDA Inspected Facilities MIL-C-22750 & MIL-P-24441 MIL-C-4556 & MIL-C-22750 (Semi-Gloss) Master Painters Institute MPI # 177 (Semi-Gloss) Master Painters Institute MPI # 82 when used with an anti-slip additive Master Painters Institute MPI # 108 (Semi-Gloss) COLOR: Available in factory-mixed colors: White, Safety Yellow, Safety Red, Silver Gray, Battleship Gray, Black, and Clear. Also available in Custom Colors. NOTE: CUSTOM COLORS ARE NON-RETURNABLE. COVERAGE: 400-500sq.ft. per gallon SHEEN: Gloss DRY TIMES: To Touch: 6hrs Recoat: 10-12hrs Max Recoat: 3 days (must scuff sand after 3 days to recoat) Foot Traffic: 24-48hrs Full Cure: 7 days POT LIFE: About 7 hours SURFACE PREPARATION: All surfaces must be sound, dry, clean and free of oil, grease, dirt, mildew, mill scale, form release agents, curing compounds, loose and flaking paint and other surface contaminants. NEW SURFACES: Concrete and Masonry: All masonry surfaces must be allowed to cure a minimum of 30 days before painting. Acid etch or abrasive blast all slick, glazed concrete or concrete with laitance. For acid etching, follow all manufacturer’s directions and safety instructions. Rinse thoroughly and allow to dry. Prime concrete with one coat of V155 100% Solids Epoxy Pre-Primer. Steel and Ferrous Metals: All direct to metal coatings provide maximum performance over near white metal blasted surfaces (SSPC-SP 10). There are however, situations and cost considerations that may prevent this type of surface preparation from being done. Corotech® Industrial Coatings have been designed to provide protection over less than ideal surfaces. The recommended standard is a commercial blast (SSPC-SP 6). The steel profile after the blast should be 1-2 mils and be jagged in nature. Surfaces must be free of grit dust. The coating should be applied as soon as possible after the blast in order to prevent flash rusting or surface contamination. Hand tool cleaning (SSPC-SP 2) or power tool cleaning (SSPC-SP 3) can be used if blasting is not possible. In areas where adequate surface preparation is not possible the use of V155 100% Solids Epoxy Pre- Primer is recommended. In highly corrosive areas where additional rust inhibitive qualities are required, prime with one coat of V170 Organic Zinc Rich Primer prior to applying epoxy coatings. Galvanized and Non-ferrous Metals: Solvent clean all surfaces. Apply one coat of Corotech® V110 Acrylic Metal Primer or V175 Waterborne Bonding Primer. Weathered Galvanized: Clean Thoroughly - Apply one coat V155 100% Solid Epoxy Pre-Primer. Previously Painted Surfaces: Can be applied over most old industrial finishes in good condition. Test patches are recommended to check for wrinkling or lifting of existing coatings. V155 100% Solids Epoxy Pre-Primer may be used as a barrier coat over all existing coatings. APPLICATION: Mixing Instructions: This is a two component kit and is pre-proportioned for error free mixing. DO NOT vary from these instructions. Mix “A” & “B” separately before combining. Carefully combine the entire contents of V400-90, V400- 91 or V400-92 activator with the V400-Part A component; scrape the sides of the pail of Part B to make sure all liquid has been added. Using a jiffy mixer at low speed, blend this mixture for three to five minutes until completely blended. Keep the mixing blade turning at a slow speed to minimize whipping air into material. Scrape sides of pail during the mixing process. Care must be taken to assure both components are completely mixed in order to avoid partially cured spots in the coating. Allow to induct for 30 minutes. It is extremely important to remember that Epoxy Coatings have a limited pot life; therefore, it is wise to make sure sufficient manpower and correct application tools are in order prior to starting the mixing sequence. Estimated pot life is: 14 Hrs. @ 50 °F (10 °C) / 7 Hrs. @ 77 °F (25 °C) / 3 Hrs. @ 100 °F (38 °C) Do not thin this product – it is ready to use once both components are thoroughly mixed. Application: Airless Spray (Preferred Method): Tip range between .015 and .019. Total fluid output pressure at tip should not be less than 2000 psi. Air Spray (Pressure Pot): DeVilbis MBC or JGA gun, with 704 or 765air cap and Fluid Tip E. Brush: Natural Bristle only. Roller: Industrial Cover with Phenolic core. ¼” – ½” nap. NOTE: Do not allow material to remain in hoses, gun or spray equipment. Thoroughly flush all equipment with recommended thinner. No reduction is necessary. Special Note: To ensure complete clarity of the V400-00 Clear, this item should only be catalyzed with the V400-90 Gloss Converter. The use of the Semi-Gloss Converter will give the V400-00 Clear a hazy look. All painted surfaces may be slippery, especially when wet. Where non-skid characteristics are desired, hand broadcast an appropriate anti-slip aggregate into the wet film then back-roll to encapsulate. Benjamin Moore’s Corotech Anti-Slip Aggregate V630 works well for non-clear coats. All epoxy coatings will chalk and fade if applied on exterior surfaces subjected to direct sunlight. All epoxies tend to yellow. Where color and gloss retention is important, top-coating will be necessary. Will stain with prolonged exposure to some solvents and chemicals or in kennels if exposed to animal waste. This staining will not affect the durability or protective qualities of the coating. Do not apply if material, substrate or ambient temperature is below 45 °F (7.2 °C). Relative humidity should be below 90%. Do not apply if within 5 degrees of dew point or if rain is expected within 12 hours of application.
$70.99$60.99
-
Benjamin Moore Prep All Universal Metal Primer
Prep All Universal Metal Primer is an economical, single-component primer engineered to provide corrosion protection on all ferrous metals. This quick-drying formula provides fast production times, and its alkyd resin formulation allows for application of a wide variety of intermediate and finish coat products. Formulated for air spraying, it can also be applied by airless and HVLP sprayers, brushes, or rollers. Features Fast 30 minute dry – recoat in 4 hours Tie coat over many existing coatings Corrosion protection on all ferrous metals Available in White, Red or Gray Details Available Colors: White, Red, and Gray Sheen (or Gloss): Flat Cleanup: Solvent Resin Type: Phenolic-Alkyd Recommended Use: Interior, Exterior Data Sheets SDS SDS CV132-01 (English) SDS CV132-01 (Español) SDS CV132-20 (English) SDS CV132-20 (Español) SDS CV132-70 (English) SDS CV132-70 (Español) SDS V132-01 (English) SDS V132-01 (Español) SDS V132-20 (English) SDS V132-20 (Español) SDS V132-27804 (English) SDS V132-27804 (Español) SDS V132-70 (English) SDS V132-70 (Español) TDS TDS CV132 (English) TDS V132 (English)
$63.99$44.99
-
Benjamin Moore Prime Lock Plus
Prime Lock Plus is an interior and exterior alkyd that primes and seals plaster, wood, drywall, and previously paint or varnished surfaces. It ensures the paint top coat has consistent sheen and appearance (excellent enamel holdout), seals even the toughest stains without raising the wood grain, and can be top coated with any latex or alkyd finish coat. Features High-hiding, multi-purpose alkyd primer sealer Superior adhesion to glossy surfaces Prevents bleed-through Excellent enamel holdout Details Available Colors: White Sheen (or Gloss): Primer Cleanup: Solvent Resin Type: Alkyd Recommended Use: Interior, Exterior Data Sheets SDS SDS CPS-8000 (English) SDS CPS-8000 (Español) SDS PS-8100 (English) SDS PS-8100 (Español) TDS TDS CPS-8000 (English) TDS PS-8100 (English)
$15.99$13.99
-
Benjamin Moore PVA Primer/Finish Primer (100)
This PVA Primer/Finish is fast drying and ideal for interior drywall and thoroughly cured plaster. It is spray-ready right out of the bucket and can be touched-up easily. Ideal for both high volume production and property managers, it provides good dry hide and a uniform flat finish to hide imperfections. This product is not intended for areas that require frequent washing. Features Use as a primer only or primer and finish Good dry hide Easy touch-up Easy to spray Dry to touch in 30 minutes More Information Available Colors: White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior MPI Rating: 50 VOC Level: 19.0 SAFETY DATA SHEETS SDS 100-11 (English) TECHNICAL DATA SHEETS TDS 100.11 (English)
$89.99$79.99
-
Romabio Romabio EcoForte Consolidator Hardener
Romabio EcoForte Consolidator is a zero-odor, bio-based concentrate of potassium silicate that is mixed with water on the project site. It serves as mineral hardener, clear coat protective solution to extend the life of Romabio Classico Limewash patina on high-traffic horizontal surfaces or erosive areas. Applied directly onto brick, EcoForte Consolidator can help protect against spalding, particularly on low-fired brick, consolidating the brick surface and providing water resistance simultaneously. It is historically known as water glass or liquid glass. When applied to an unpainted mineral surface it forms a chemical reaction with the substrate essentially reinforcing and strengthening the inherent mineral aspects of brick, stone and most cements.
$34.99$29.99
-
Romabio Romabio Int-Ext Satin
Romabio Masonry Flat is an extremely durable, beautiful, permanent flat finish for Interior/Exterior masonry surfaces. It can be applied in 2-coats, no additional primer needed for absorbent masonry and comes with a 20-year warranty, when applied as directed. Romabio Masonry Flat is a breathable coating that calcifies to masonry surfaces allowing moisture to release and will not peel, chip, or flake off. Ideal for brick, stone, stucco, and cementitious siding/Hardie board. Easy to apply with brush, roller, or sprayer. Touch ups can be done at any time. For pre-painted surfaces, apply one coat of Romabio MicroGrip Primer first. Handcrafted in Italy. COVERAGE (1 Coat): 1 Liter: 65-85 sq ft 2.5 Liters: 165-215 sq ft 15 Liters: 1000-1300 sq ft
$49.99$39.99
-
Romabio Romabio MicroGrip Primer
MicroGrip Primer is a universal mineral primer for Interior/Exterior use. Recommended for previously painted surfaces such as drywall, painted brick, painted stone, cement board (i.e. Hardie) Product must be diluted with water Dry Time 8-12hrs Coverage 1L = 70-120sfsf 2.5L = 175-300sf 15L = 1050-1800sf
$34.99$27.99
-
Romabio Romabio Mineral Shield - GAL
Mineral Shield is an invisible top coating that locks and protects beautiful Romabio mineral paint finishes from natural patina, or weathering created by water. The breathable coating repels water droplets but still allows water vapor to pass through, protecting the painted surface and preventing the growth of algae, moss, and mold. Prevents the growth of algae, moss, and mold, keeping paint looking clean and fresh Repels water, reducing patina and extending the life of paint and ensuring a longer-lasting finish Invisible, clear coating won’t discolor exterior painted surfaces Significantly reduces staining from clay, dirt and grass Coverage is approximately 200-300sf per gallon
$49.99
-
Romabio Romabio Velatura Mineral Wash
Romabio Masonry Flat is an extremely durable, beautiful, permanent flat finish for Interior/Exterior masonry surfaces. It can be applied in 2-coats, no additional primer needed for absorbent masonry and comes with a 20-year warranty, when applied as directed. Romabio Masonry Flat is a breathable coating that calcifies to masonry surfaces allowing moisture to release and will not peel, chip, or flake off. Ideal for brick, stone, stucco, and cementitious siding/Hardie board. Easy to apply with brush, roller, or sprayer. Touch ups can be done at any time. For pre-painted surfaces, apply one coat of Romabio MicroGrip Primer first. Handcrafted in Italy. COVERAGE (1 Coat): 1 Liter: 65-85 sq ft 2.5 Liters: 165-215 sq ft 15 Liters: 1000-1300 sq ft
$95.99$47.99
-
Benjamin Moore Stix® Waterborne Bonding Primer
Premium-quality, acrylic-urethane primer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals. Features Bonds to hard-to-coat surfaces Cures in temperatures as low as 35°F Creates an extremely hard film Excellent enamel holdout Can be top coated with almost any product Details Available Colors: White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: Acrylic Urethane Recommended Use: Interior, Exterior Data Sheets SDS SDS SXA-1100 (English) SDS SXA-1100 (Español) TDS TDS SXA-110 (English)
$82.99$21.99
