Wood Stains

21 products


  • Ultra Spec Exterior Solid Color Stain

    Benjamin Moore Ultra Spec Exterior Solid Color Stain

    Ultra Spec Exterior Solid Color Stain Quality acrylic latex stain with a rustic flat finish Breathable surface for maximum durability Compatible with Gennex® colourants Excellent hiding and adhesion Specially formulated to resist mildew growth on the stain film Resistant to blistering Soap and water clean up Fade resistant Easy application Engineered with Gennex® Color Technology Recommended for:Application to exterior surfaces such as new or previously painted wood, hardboard, fibre cement, masonry, and unglazed brick. FEATURES   Available Colors: Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Exterior MPI Rating: VOC Level: 43.0 Color available: DATASHEETS SAFETY DATA SHEET: 45001_SDS_EN.pdf 45001_SDS_SP.pdf 4501X_SDS_EN.pdf 4501X_SDS_SP.pdf 4502X_SDS_EN.pdf 4502X_SDS_SP.pdf 4503X_SDS_EN.pdf 4503X_SDS_SP.pdf 4504X_SDS_EN.pdf 4504X_SDS_SP.pdf TECHNICAL DATA SHEET: 450_TDS_US.pdf OTHER DATA SHEET:

    $52.99$45.99

  • Allpro Premium Polyurethane

    AllPro Allpro Premium Polyurethane

    Premium Polyurethane Wood Finishes are formulated to provide the maximum beauty and protection for kitchen cabinets, doors, trim, furniture, and floors. Excellent Flow & Leveling Spreads Evenly Resists Impact & Abrasion Wear Resistant Excellent Durability Interior Use Allpro brand manufactured by Richards Paint

    $92.99$83.99

  • Old Masters Water-Based Wood Stain

    Old Masters Old Masters Water-Based Wood Stain

    This stain enhances the beauty of bare wood surfaces with intense color. Water-Based Wood Stain is recommended for use on bare, interior wood surfaces or surfaces from which the previous finish has been removed. This stain is a fast drying, semi-transparent wood stain that cleans easily with soap and water.

    $54.99$19.99

  • Armstrong-Clark Semi-Transparent Stain

    Armstrong-Clark Armstrong-Clark Semi-Transparent Stain

    Armstrong-Clark’s deck and siding wood stain makes use of conditioning oils that part from the drying oils in the formula. The nondrying oils penetrate into the wood and take the place of the wood’s diminishing natural oils. This process revives and restores wood. The drying oils stay on the wood surface and lock in the conditioning oils to produce a barrier that is dry to the touch. Armstrong’s deck and siding wood stain contain vegetable oils in addition to transparent pigments, solvents, mildewcides and water repellents. Application can be done in direct sunlight and on hot days. If the first coat of stain penetrates within 30 minutes an additional coat may be applied for extra protection. Applies easily by roller, brush, or airless sprayer. During spraying – going back over with a brush or roller will help give a more even appearance. After 24 hours any remaining puddles or glossy spots can be removed using a dry rag. Older wood is reconditioned by deep penetrating nondrying oils. Drying oils lock in the conditioning oils while pigments and water repellents lock out moisture and UV damage. Armstrong wood stain is compliant with all environmental standards. Does not contain any offensive odors. Coverage Area Armstrong-Clark Deck and Siding Stain applies at 150-200 sq ft per gallon. Depending on wood porosity, actual coverage will vary.

    $69.99$59.99

  • Armstrong-Clark Semi-Solid Stain

    Armstrong-Clark Armstrong-Clark Semi-Solid Stain

    Armstrong-Clark’s deck and siding wood stain makes use of conditioning oils that part from the drying oils in the formula. The nondrying oils penetrate into the wood and take the place of the wood’s diminishing natural oils. This process revives and restores wood. The drying oils stay on the wood surface and lock in the conditioning oils to produce a barrier that is dry to the touch. Armstrong’s deck and siding wood stain contain vegetable oils in addition to transparent pigments, solvents, mildewcides and water repellents. Application can be done in direct sunlight and on hot days. If the first coat of stain penetrates within 30 minutes an additional coat may be applied for extra protection. Applies easily by roller, brush, or airless sprayer. During spraying – going back over with a brush or roller will help give a more even appearance. After 24 hours any remaining puddles or glossy spots can be removed using a dry rag. Older wood is reconditioned by deep penetrating nondrying oils. Drying oils lock in the conditioning oils while pigments and water repellents lock out moisture and UV damage. Armstrong wood stain is compliant with all environmental standards. Does not contain any offensive odors. Coverage Area Armstrong-Clark Deck and Siding Stain applies at 150-200 sq ft per gallon. Depending on wood porosity, actual coverage will vary.

    $89.99$69.99

  • Armstrong-Clark Transparent Stain

    Armstrong-Clark Armstrong-Clark Transparent Stain

    Armstrong-Clark’s deck and siding wood stain makes use of conditioning oils that part from the drying oils in the formula. The nondrying oils penetrate into the wood and take the place of the wood’s diminishing natural oils. This process revives and restores wood. The drying oils stay on the wood surface and lock in the conditioning oils to produce a barrier that is dry to the touch. Armstrong’s deck and siding wood stain contain vegetable oils in addition to transparent pigments, solvents, mildewcides and water repellents. Application can be done in direct sunlight and on hot days. If the first coat of stain penetrates within 30 minutes an additional coat may be applied for extra protection. Applies easily by roller, brush, or airless sprayer. During spraying – going back over with a brush or roller will help give a more even appearance. After 24 hours any remaining puddles or glossy spots can be removed using a dry rag. Older wood is reconditioned by deep penetrating nondrying oils. Drying oils lock in the conditioning oils while pigments and water repellents lock out moisture and UV damage. Armstrong wood stain is compliant with all environmental standards. Does not contain any offensive odors. Coverage Area Armstrong-Clark Deck and Siding Stain applies at 150-200 sq ft per gallon. Depending on wood porosity, actual coverage will vary.

    $69.99$59.99

  • PPG SIKKENS DOOR & WINDOW - CLEAR - SATIN - GAL - SIK48003

    Sikkens PPG SIKKENS DOOR & WINDOW - CLEAR - SATIN - GAL - SIK48003

    PPG Sikkens Door & Window Wood Finish is a high performance finish for specialty applications such as exterior trim and doors. This alkyd high solids formulation offers optimum protection and a distinctive look. The inclusion of translucent iron oxide pigments and UV absorbents gives excellent UV protection and color retention. The finish creates a protective film while giving the signature distinctive Sikkens Wood Finishes look. More resilient alternative to exterior varnishes and polyurethanes. Usage: Doors, Windows, Garage and Fiberglass Doors. Available as a clear satin, clear gloss or 4 ready mix colors in satin. 

    $130.99$111.99

  • SIKKENS DOOR & WINDOW - CLEAR - SATIN - QT - SIK48003

    Sikkens SIKKENS DOOR & WINDOW - CLEAR - SATIN - QT - SIK48003

    Sikkens Cetol Door & Window is a premium translucent exterior stain with an alkyd high solids formulation that offers optimum protection and a distinctive look for these unique areas. Available as a clear satin, clear gloss or 4 ready mix colors in satin.  For a greater selection of colors, Sikkens Cetol 1 may be used as a base coat.

    $52.99$41.99

  • SIKKENS SRD TRANSLUSCENT - TEAK - GAL - SIK240-085

    Sikkens SIKKENS SRD TRANSLUSCENT - TEAK - GAL - SIK240-085

    Sikkens ProLuxe Cetol SRD is an easy to use one coat, translucent finish.  It has excellent UV protection and allows for high quality, wood clarity. The finish features a transparent, matte sheen.  Contains transparent iron oxide pigments for excellent UV protection and wood clarity.   Dries to the touch in 2-4 hours.  Can be walked on in 24 hours. Created for use on a variety of wood surfaces including logs, decks, and rails.

    $79.99$63.99

  • Armstrong-Clark - Shake Shield - 5gal

    Armstrong-Clark Armstrong-Clark - Shake Shield - 5gal

    Shake Shield is a one-coat, high solids semi-transparent pigmented finish for unpainted wood shakes and shingles. Armstrong’s Shake Shield is made up of heavy and light-bodied oils to ensure proper protection.

    $299.95$269.95

  • Armstrong-Clark Hardwood & IPE Stain

    Armstrong-Clark Armstrong-Clark Hardwood & IPE Stain

    Armstrong-Clark’s deck and siding wood stain makes use of conditioning oils that part from the drying oils in the formula. The nondrying oils penetrate into the wood and take the place of the wood’s diminishing natural oils. This process revives and restores wood. The drying oils stay on the wood surface and lock in the conditioning oils to produce a barrier that is dry to the touch. Armstrong’s deck and siding wood stain contain vegetable oils in addition to transparent pigments, solvents, mildewcides and water repellents. Application can be done in direct sunlight and on hot days. If the first coat of stain penetrates within 30 minutes an additional coat may be applied for extra protection. Applies easily by roller, brush, or airless sprayer. During spraying – going back over with a brush or roller will help give a more even appearance. After 24 hours any remaining puddles or glossy spots can be removed using a dry rag. Older wood is reconditioned by deep penetrating nondrying oils. Drying oils lock in the conditioning oils while pigments and water repellents lock out moisture and UV damage. Armstrong wood stain is compliant with all environmental standards. Does not contain any offensive odors. Coverage Area Armstrong-Clark Deck and Siding Stain applies at 150-200 sq ft per gallon. Depending on wood porosity, actual coverage will vary.

    $89.99$69.99

  • Old Masters Gel Stain

    Old Masters Old Masters Gel Stain

    Old Masters Gel Stain is a highly pigmented, oil-based stain designed to achieve intense colors on interior wood, fiberglass, primed metal, and composition surfaces. You can use Gel Stain on the exterior side of entry and garage doors with the use of a protective exterior clear finish.  Its thick formula allows easy application and superior color control, necessary to achieve a rich and uniform color on most surfaces in a single application.  Gel Stain is especially recommended for woods such as pine, birch, maple, poplar, and cherry. Gel Stain is excellent for vertical surfaces.

    $49.99$24.99

© 2024 Marketplace Paints, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account