Mineral Paints

Romabio Classico Limewash Paint is an authentic Italian, slaked-lime paint that is specially formulated to create unique white wash effects for Interior and Exterior brick, stone, and other masonry surfaces. It is designed to be easy-to-use and meant to be single coat application.  Once applied, Romabio Classico Limewash Paint can be left as a solid coating or it can be distressed by brush, rag or hose water in areas to yield the desired effect.  Order as Bianca White or your preferred off-white to light pastel color Romabio - Look Book ▶ Application One (1) Coat Process Some customers apply this product in Two (2) Coats for a different look Apply with Brush, Roller or Paint sprayer Product needs to be diluted with 30–70% water depending on the desired look; test your solution on an area; test area can be hosed off unless it is allowed to dry for a day or longer...then you will need to use a pressure washer Classico Limewash sizes & Coverage: 1 Liter: 80–100 SQ FT 2.5 Liters: 200–400 SQ FT 15 Liters: 1200–1500 SQ FT Use together with Romabio Mineral Shield for a clear topcoat that protects the desired patina finish and resists stains or mildew. Use together with Romabio Masonry Brush specifically designed to use with Romabio lime-based paints.

Read more less

Velatura Mineral Wash is an authentic mineral-based paint to create mottling or subtle movement effects for a limewash look on Interior drywall in two easy steps with no additional primer. An artistic applicator can paint soft tonal color variations in a brush-applied crosshatch technique for the 1st coat and can use varied techniques with a brush, cloth, or rag for the 2nd coat. Recommended in bedrooms, living rooms, and other common areas (Not recommended for high-traffic)   Toxin-free, Zero-VOC, and environmentally friendly   Brush-applied in two easy steps with no primer Multiple applicators can work the same wall and achieve similar effects Best surface is interior gypsum drywall that is primed For pre-painted surfaces, apply one coat of Romabio MicroGrip Primer first. Handcrafted in Italy. Sizes & Coverage (1 Coat): 1 Liter: 100-140 sq ft 2.5 Liters: 250-350 sq ft 15 Liters: 1500-2100 sq ft Application: PREP: Make sure the surface is clean and ready to be painted.  1st COAT: Apply undiluted or add up to 5% water in a crosshatch technique to fully cover the wall. Let dry to touch before next coat.  2nd COAT: Must dilute 50%-80% with water and then paint in crosshatch technique and use cloth technique if needed.  TOOLS: Apply with a brush for 1st Coat and brush and/or cloth for 2nd coat.  DRY TIME: 4-6 Hours TOUCH UPS: Very flat finish. 

Read more less

Romabio Masonry Flat Paint is an authentic Italian, slaked-lime paint that is specially formulated to create unique white wash effects for Interior and Exterior brick, stone, and other masonry surfaces. It is designed to be easy-to-use and meant to be single coat application.  Once applied, Classico Limewash can be left as a solid coating or it can be distressed by brush, rag or hose water in areas to yield the desired effect. Romabio Masonry Flat Paint. Order as Bianca White or your preferred off-white to light pastel color Romabio - Look Book ▶ Application: No primer needed Two (2) Coat Process Dampen the brick surface prior to the 1st coat Apply with Brush, Roller or Paint sprayer The newer U.S. sizes are ready to use; max water dilution 5% Older Italian product sizes require dilution with 50–70% water Available sizes & coverage: 1 quart: 60–100 SQ FT 1 gallon: 200–250 SQ FT 5 gallon: 1200–1500 SQ FT Use together with Romabio Mineral Shield for a clear topcoat that protects the desired patina finish and resists stains or mildew. Use together with Romabio Masonry Brush specifically designed to use with Romabio lime-based paints.

Read more less

Mineral Shield is an invisible top coating that locks and protects beautiful Romabio mineral paint finishes from natural patina, or weathering created by water. The breathable coating repels water droplets but still allows water vapor to pass through, protecting the painted surface and preventing the growth of algae, moss, and mold.  Prevents the growth of algae, moss, and mold, keeping paint looking clean and fresh Repels water, reducing patina and extending the life of paint and ensuring a longer-lasting finish Invisible, clear coating won’t discolor exterior painted surfaces Significantly reduces staining from clay, dirt and grass Coverage approximately 200-300sf per gallon Designed for use together with Romabio Limewash, Masonry Flat, Masonry Textured or Lime Slurry products.

Read more less

Romabio Masonry Flat is an extremely durable, beautiful, permanent flat finish for Interior/Exterior masonry surfaces. It can be applied in 2-coats, no additional primer needed for absorbent masonry and comes with a 20-year warranty, when applied as directed. Romabio Masonry Flat is a breathable coating that calcifies to masonry surfaces allowing moisture to release and will not peel, chip, or flake off. Ideal for brick, stone, stucco, and cementitious siding/Hardie board. Easy to apply with brush, roller, or sprayer. Touch ups can be done at any time. For pre-painted surfaces, apply one coat of Romabio MicroGrip Primer first. Handcrafted in Italy. COVERAGE (1 Coat): 1 Liter: 65-85 sq ft 2.5 Liters: 165-215 sq ft 15 Liters: 1000-1300 sq ft

Read more less

Romabio Lime Slurry is an authentic Italian, slaked-lime paint that is specially formulated to create unique white wash effects for Interior and Exterior brick, stone, and other masonry surfaces. It is designed to be easy-to-use and meant to be single coat application.  Once applied, Romabio Lime Slurry can be left as a solid coating or it can be distressed by brush, rag or hose water in areas to yield the desired effect.  Order as Bianca White or your preferred off-white to light pastel color Romabio - Look Book ▶ Application: No primer needed Two (2) Coat Process Apply with Brush, Roller or Paint sprayer Product is ready to use; It can be diluted 5% with water Lime Slurry sizes & coverage: 2.5 Liters: 90–100 SQ FT 15 Liters: 540–600 SQ FT Use together with Romabio Mineral Shield for a clear topcoat that protects the desired patina finish and resists stains or mildew. Use together with Romabio Masonry Brush specifically designed to use with Romabio lime-based paints.

Read more less

Romabio Masonry Flat is an extremely durable, beautiful, permanent flat finish for Interior/Exterior masonry surfaces. It can be applied in 2-coats, no additional primer needed for absorbent masonry and comes with a 20-year warranty, when applied as directed. Romabio Masonry Flat is a breathable coating that calcifies to masonry surfaces allowing moisture to release and will not peel, chip, or flake off. Ideal for brick, stone, stucco, and cementitious siding/Hardie board. Easy to apply with brush, roller, or sprayer. Touch ups can be done at any time. For pre-painted surfaces, apply one coat of Romabio MicroGrip Primer first. Handcrafted in Italy. COVERAGE (1 Coat): 1 Liter: 65-85 sq ft 2.5 Liters: 165-215 sq ft 15 Liters: 1000-1300 sq ft

Read more less

MicroGrip Primer is a universal mineral primer for Interior/Exterior use. Recommended for previously painted surfaces such as drywall, painted brick, painted stone, cement board (i.e. Hardie) Product must be diluted with water Dry Time 8-12hrs Sizes & Coverage 1L = 70-120sfsf 2.5L = 175-300sf 15L = 1050-1800sf

Read more less

Romabio Masonry Textured Finish is an authentic Italian, slaked-lime paint that is specially formulated to create unique white wash effects for Interior and Exterior brick, stone, and other masonry surfaces. It is designed to be easy-to-use and meant to be single coat application.  Once applied, Classico Limewash can be left as a solid coating or it can be distressed by brush, rag or hose water in areas to yield the desired effect.  Order as Bianca White or your preferred off-white to light pastel color Romabio - Look Book ▶ Application: One (1) Coat Process Apply with Brush, Roller or Paint sprayer Product needs to be diluted with 30–70% water depending on the desired look; test your solution on an area; test area can be hosed off unless it is allowed to dry for a day or longer...then you will need to use a pressure washer Classico Limewash sizes & coverage: 1 Liter: 80–100 SQ FT 2.5 Liters: 200–250 SQ FT 15 Liters: 1200–1500 SQ FT Use together with Romabio Mineral Shield for a clear topcoat that protects the desired patina finish and resists stains or mildew. Use together with Romabio Masonry Brush specifically designed to use with Romabio lime-based paints.

Read more less

Experience the ultimate durability and easy application with PlasterGuard by Meoded. This versatile product provides exceptional protection for your walls, furniture, and more. Whether you're a DIY enthusiast or a professional contractor, PlasterGuard is the perfect choice for all your protection needs. Sheen options: Low Gloss and Satin Approx coverage 80sf per quart & 250-350sf per gallon Designed for all Meoded plaster products, including Concretta Recommended as the protective coating for plasters and Meoded Concretta used in shower applications  

Read more less

PlasterSeal Plus enhances the moisture resistance of plaster surfaces on horizontal flooring & countertop surfaces. Applying thin, even coats will achieve a smooth and consistent finish. It may also be necessary to apply additional coats to build up the desired level of protection and gloss. Protective Topcoat for Meoded Concretta applied on flooring or countertops Applied after 1st coat of Meoded PlasterGuard Easy two (2) part waterborne urethane application Interior or Exterior Use

Read more less

Meoded's Lime Wash Base Coat is a premium-quality, water-based, 100% acrylic primer formulated to be used as a base coat for Meoded Lime Wash. This primer serves as the base coat for both interior and exterior Lime Wash applications. The easy-to-use formula is created to properly absorb Meoded's Lime Wash to help achieve the right finish for your project. For best results, two coats are recommended. See Meoded Lime Wash

Read more less