Specialty Paint

GarageGuard® Water Based 2 Part Epoxy is a new generation water- based catalyzed epoxy which offers performance equal to traditional solvent based epoxy systems. It provides superior chemical, abrasion and impact resistance when compared to conventional waterborne epoxies. The highly cross-linked film provides years of service. GarageGuard® Water Based 2 Part Epoxy produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling. This product is suitable for use in USDA inspected facilities. This is a two component product with a mix ratio of 3:1. It requires 3 parts of the proper “A” or Base Component (underfilled gallon can) mixed with 1 part of the proper “B” or Converter Component (quart). Mixing of Partial Kits Is Not Recommended.  Waterborne 2-part epoxy Durable semi-gloss finish, abrasion & impact resistant  Will not lift existing coatings Resists hot tire pick-up from cars Resists most automobile fluids Recoat in 8 hours; park vehicles in 3 days For Garage Floors, Basement Floors and Other Concrete Surfaces Coverage: 250-300sq.ft. per gallon Dry Times:  Tack Free: 2 hours Recoat: 8 hours Foot Traffic: 24 hours Vehicular Traffic: 72 hours Recommended For: GarageGuard Waterborne Epoxy is designed for use on basement floors, garage floors and other concrete surfaces. Ideal for use in food and beverage processing, transportation, warehouses, industrial refurbishment, healthcare, schools, large commercial structures, industrial and commercial flooring, and other areas where a performance epoxy is needed.    Limitations: Do not apply when air, surface or product temperature is below 50 °F Use the entire gallon of GarageGuard® within 4 hours of initial mixing. Mixing of Partial Kits Is Not Recommended. Not recommended for use in immersion service or acidic exposures. Cleanup: Water Resin Type: Amine Adduct Epoxy Recommended Use: Interior Sheen: Semi-gloss Available Colors: Showroom Gray, Desert Sand, Custom Colors MPI Rating: N/A VOC Level: < 250 g/L

Read more less

Meoded Pearlas Velvet Mettallic Finish is a Low VOC decorative metallic faux finishing product that produces a look of soft suede metallic Venetian Plaster. Velvet is the ideal wall treatment for formal living and dining rooms, upscale boutiques, posh hotel lobbies, and other spaces where refined style and beauty is desired. With fine metallic powders, its tremendous depth of color allows Velvet to exhibit two or more colors when reflected in various lights. Suede Finish Satin Sheen Low VOC Water based Coverage: 240 SF/Gal and 60 ft/qt Minimum 2 coats recommended Application: Primer should be used before first coat of Pearlas; new drywall should receive PVA type & oil-based primer over previous oil-type paints or stains Apply first coat with trowel and allow to dry at least one (1) hour before applying second coat. Apply material in small amounts with the trowel with varied movements, and then use a clean trowel to achieve desired movement throughout finish.

Read more less

Meoded’s Sapphire Metallic is combined with clear glass beads to create a beautiful textured Sahara Effect. The Sahara Effect creates a pearlescent rough yet elegant texture on your wall.  Best applied using a chip or spalter brush - can be applied in horizontal, vertical, crisscross (2 coats) or irregular fashion. 

Read more less

Meoded Sapphire Metallic is a pearlescent paint made with fine mica powders that gives walls, metal, trim, furniture or any other paintable surface a rich, beautiful pearl luster and opulent look of shimmering satin with less environmental impact. Special Color Information:  Most of the colors shown on our selector tool are custom mixed to the color shown. However, the SM-1500, SM-1600 and SM-1700 are considered Flash Translucent colors and are a topcoat metallic hue. The two (2) color variations shown on our color selector, such as 1500 or 1500B, are achieved using a first "base" coat of latex white or black paint or another Meoded Sapphire Metallic (white or black). If another base color is selected, then the top coat will show that color with the hue of either Gold, Bronze or Blue. Feel free to e-mail us with any questions. SM-1500 Flash Gold SM-1600 Flash Bronze SM-1700 Flash Blue Product features: Satin Finish Low VOC Water based Coverage: 300 SF/Gal and 75 ft/qt Minimum 2 coats recommended  

Read more less

Paint Extender Specially formulated to enhance the application properties of our premium products without adverse effects on dry film properties Proprietary 100% acrylic Very low VOC For interior and exterior use FEATURES   Available Colors: Clear Sheen (or Gloss): N/A Cleanup: Soap and Water Resin Type: Proprietary Acrylic Latex Recommended Use: Interior, Exterior MPI Rating: VOC Level: 6.0 Color available: Clear DATASHEETS SAFETY DATA SHEET: 51800_SDS_EN.pdf 51800_SDS_SP.pdf TECHNICAL DATA SHEET: 518_TDS_US.pdf OTHER DATA SHEET:

Read more less

Rust Arrestor is a water-based, film-forming primer that chemically transforms rust, halting the corrosion process and enabling the surface to accept a topcoat. When applied over tightly adhering rust, it forms a black, protective film. Features Chemically converts rust to inhibit corrosion Forms a tight chemical bond to rusted surfaces Penetrates into tight areas Suitable for use in USDA inspected facilities Can be top coated with latex, alkyd, urethane, or epoxy finishes Details Available Colors: N/A Sheen (or Gloss): Low Sheen Cleanup: Soap and Water Resin Type: Latex Recommended Use: Interior, Exterior Data Sheets SDS SDS V180-00 (English) SDS V180-00 (Español) TDS TDS V180 (English)

Read more less