Benjamin Moore Exterior Paints

  GarageGuard® Water Based 2 Part Epoxy is a new generation water- based catalyzed epoxy which offers performance equal to traditional solvent based epoxy systems. It provides superior chemical, abrasion and impact resistance when compared to conventional waterborne epoxies. The highly cross-linked film provides years of service. GarageGuard® Water Based 2 Part Epoxy produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling. This product is suitable for use in USDA inspected facilities. This is a two component product with a mix ratio of 3:1. It requires 3 parts of the proper “A” or Base Component (underfilled gallon can) mixed with 1 part of the proper “B” or Converter Component (quart). Mixing of Partial Kits Is Not Recommended.  Waterborne 2-part epoxy Durable semi-gloss finish, abrasion & impact resistant  Will not lift existing coatings Resists hot tire pick-up from cars Resists most automobile fluids Recoat in 8 hours; park vehicles in 3 days For Garage Floors, Basement Floors and Other Concrete Surfaces Coverage: 250-300sq.ft. per gallon Dry Times:  Tack Free: 2 hours Recoat: 8 hours Foot Traffic: 24 hours Vehicular Traffic: 72 hours Recommended For: GarageGuard Waterborne Epoxy is designed for use on basement floors, garage floors and other concrete surfaces. Ideal for use in food and beverage processing, transportation, warehouses, industrial refurbishment, healthcare, schools, large commercial structures, industrial and commercial flooring, and other areas where a performance epoxy is needed.    Limitations: Do not apply when air, surface or product temperature is below 50 °F Use the entire gallon of GarageGuard® within 4 hours of initial mixing. Mixing of Partial Kits Is Not Recommended. Not recommended for use in immersion service or acidic exposures. Cleanup: Water Resin Type: Amine Adduct Epoxy Recommended Use: Interior Sheen: Semi-gloss Available Colors: Showroom Gray, Desert Sand, Custom Colors MPI Rating: N/A VOC Level: < 250 g/L

Read more less

  Epoxy Pool Paint is a high solids, two-component polyamide epoxy coating that offers excellent chemical and abrasion resistance. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. Use Epoxy Pool Paint over previous epoxy coatings, steel, fiberglass, bare concrete, marcite, gunite, or other masonry surfaces in sound condition. Two-component polyamide epoxy pool paint For use on concrete, marcite, gunite, fiberglass, and steel pools Can also be used over existing epoxy coatings Extremely durable Resistant to common pool chemicals, including chlorine

Read more less

A premium exterior alkyd primer ideal for tannin-rich woods, offering outstanding stain suppression and excellent penetration for maximum adhesion and a long-lasting finish, even on weathered and chalky surfaces. Features For use on new or previously coated exterior wood Penetrates wood surfaces for maximum adhesion and a longer lasting finish Excellent stain suppressor Seals uniformly Details Available Colors: White, Deep Base Sheen (or Gloss): Primer Cleanup: Solvent Resin Type: Alkyd Recommended Use: Exterior Data Sheets SDS SDS 094-00 (English) SDS 094-00 (Español) TDS TDS 094 (English)

Read more less

Features Block Out® Exterior Tannin Blocking Primer is designed for use as a multi-purpose latex exterior whole-house primer. Block Out® excels at priming exterior wood and is formulated for use on metal and masonry surfaces, siding or most exterior substrates. Its latex formula blocks tannin stains on all new and weathered wood surfaces and can be top coated with latex or alkyd finish coats. Acrylic latex Exceptional tannin-blocking power Formulated for exterior wood, metal, and masonry Can be used on new or weathered wood Top coat with latex or alkyd paints Details Available Colors: White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Exterior Data Sheets SDS SDS TB-2100 (English) SDS TB-2100 (Español) TDS TDS TB-2100 (English)

Read more less

Alkyd Zone Marking Paint is a fast-drying, exterior/interior zone marking paint designed for use on concrete and asphalt surfaces. It resists abrasion, oils, grease, gasoline, and severe weather. Features Alkyd zone marking paint Designed for use on concrete or asphalt Resists abrasion, oils, grease, gasoline, and severe weather Details Available Colors: White Sheen (or Gloss): Flat Cleanup: Solvent Resin Type: Alkyd Recommended Use: Exterior Data Sheets SDS SDS TP-2410 (English) SDS TP-2410 (Español) SDS TP-2424 (English) SDS TP-2424 (Español) TDS TDS TP-3424_TP-2410 (English)

Read more less

Ultra Spec Masonry Int/Ext 100% Acrylic Sealer Designed to penetrate and seal the surface of new or previously painted masonry surfaces providing the proper foundation for subsequent finish coats. It can be applied to masonry with pH levels as high as 13. Reduces the porosity of masonry surfaces Provides excellent surface adhesion Tintable High Alkali Resistance - pH 13 Engineered with Gennex® Color Technology Recommended for:For application to new or previously painted masonry surfaces including; tilt-up concrete construction, stucco surfaces and block construction. FEATURES   Available Colors: Clear, White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Exterior MPI Rating: 3 VOC Level: 46.0 Color available: Clear, White DATASHEETS SAFETY DATA SHEET: 60800_SDS_EN.pdf 60800_SDS_SP.pdf 60801_SDS_EN.pdf 60801_SDS_SP.pdf TECHNICAL DATA SHEET: 608_TDS_US.pdf

Read more less

Element Guard® Exterior Paint - Soft Gloss This premium exterior paint can be applied as soon as 60 minutes before rainfall and in temperatures down to 35°F. It provides excellent adhesion and resistance to cracking and peeling to withstand wind-driven rain, humidity and other harsh weather. Resists exposure to rain as soon as 60 minutes after application* Low temperature application down to 35°F extends the painting season 100% acrylic resin delivers excellent adhesion and resistance to peeling and cracking to provide premium results that will last Provides a mildew-resistant coating Limited Lifetime Warranty (see TDS for details) Engineered with Gennex® Color Technology View the brochure for more information (English) View the brochure for more information (Spanish) *After application over wood, primed surfaces or previously painted surfaces (77°F / 50% RH). Other surfaces such as hardboard or vinyl may require a longer dry time. FEATURES   Available Colors: White (01), Gennex Bases 1X – 4X Sheen (or Gloss): Soft Gloss Cleanup: Soap and Water Resin Type: 100% Acrylic Recommended Use: Exterior MPI Rating: VOC Level: 45.3 Color available: White (01), Gennex Bases 1X – 4X DATASHEETS SAFETY DATA SHEET: 76501_SDS_EN.pdf 76501_SDS_SP.pdf 7651X_SDS_EN.pdf 7651X_SDS_SP.pdf 7652X_SDS_EN.pdf 7652X_SDS_SP.pdf 7653X_SDS_EN.pdf 7653X_SDS_SP.pdf 7654X_SDS_EN.pdf 7654X_SDS_SP.pdf TECHNICAL DATA SHEET: 765_TDS_US.pdf OTHER DATA SHEET:

Read more less