TuffCrete® Solvent Acrylic Concrete Waterproofing Stain is a solvent-borne acrylic concrete stain designed for deep penetration into concrete surfaces. With excellent adhesion, this product delivers outstanding durability in a low-sheen finish that helps to hide surface defects. It can be applied in one coat as a stain, or in two coats for an opaque finish. Select one of the "ready-made" colors or specify another color choice in the  order notes - we are able to make many colors in this product using the neutral base. Excellent adhesion Durable low-sheen finish Color fade resistance Quick-drying Deep concrete penetration Superior wear resistance Use on Concrete, Brick or Stucco walls & walkways Coverage approx 300-500sf Sell Sheet & Color Chart Details Available Colors: White, Gray Pearl, Light Gray, Tile Red, Terracotta, Desert Sand, Saddle Brown, Neutral Base, Clear (High Gloss) Sheen (or Gloss): Low Sheen Cleanup: Solvent Resin Type: Acrylic Recommended Use: Interior, Exterior Data Sheets SDS SDS CST-5100 (English) SDS CST-5100 (Español) SDS CST-5110 (English) SDS CST-5110 (Español) SDS CST-5190 (English) SDS CST-5190 (Español) SDS CST-5308 (English) SDS CST-5308 (Español) SDS CST-5310 (English) SDS CST-5310 (Español) SDS CST-5505 (English) SDS CST-5505 (Español) SDS CST-5509 (English) SDS CST-5509 (Español) SDS CST-5789 (English) SDS CST-5789 (Español) SDS CST-5922 (English) SDS CST-5922 (Español) SDS CST-5998 (English) SDS CST-5998 (Español)

Read more less

Chlorinated Rubber Swimming Pool Paint is a chlorinated rubber coating for new or old in-ground masonry pools. It provides excellent chemical resistance and is durable in fresh or salt water, and also acceptable for use in chlorinated pools. Use Chlorinated Rubber Swimming Pool Paint over existing chlorinated rubber based pool paint or over bare concrete, marcite, gunite, or other masonry surfaces in good condition. Features Chlorinated rubber system For use on new or old in-ground masonry pools For use in fresh, salt water, or chlorinated pools Details Available Colors: White, Aquamarine, Ocean Blue, Royal Blue, Red, Black Sheen (or Gloss): Semi-Gloss Cleanup: Solvent Resin Type: Chlorinated Rubber Recommended Use: Interior, Exterior Data Sheets SDS SDS CR-2602 (English) SDS CR-2602 (Español) SDS CR-2610 (English) SDS CR-2610 (Español) SDS CR-2619 (English) SDS CR-2619 (Español) SDS CR-2620 (English) SDS CR-2620 (Español) SDS CR-2623 (English) SDS CR-2623 (Español) SDS CR-2624 (English) SDS CR-2624 (Español) TDS TDS CR-26XX (English) ODS Painting Guide - CR-2600 (English) Painting Guide - CR-2600 (Español) Pool Paint FAQs (English) Pool Paint Solvent Tests (English) Swimming Pool Paint - Color Selection (English) Swimming Pool Paint - Color Selection (Español)

Read more less

Alkyd Urethane Enamel is a versatile maintenance coating for interior and exterior surfaces. The surface-tolerant formula adheres to metal surfaces that may be marginally prepared, and the exceptional flow and leveling provides a smooth, uniform finish, with excellent protective qualities. This rust preventative coating can be applied directly to ferrous metal or used in combination with a Benjamin Moore HP metal primer for increased corrosion protection. HP ALK URETHANE Enamel Gloss Urethane modified alkyd formula Protects against atmospheric corrosion UV stable Abrasion and impact resistant View the sell sheet or additional tools for more information Features Available Colors: White (01), Safety Yellow (10), Safety Red (20), Safety Blue (30), Silver Gray (70), Battleship Gray (75), Black (80) Sheen (or Gloss): Gloss Cleanup: Mineral Spirits Resin Type: Alkyd Urethane Recommended Use: Interior, Exterior MPI Rating: VOC Range: > 250 g/L  SAFETY DATA SHEETS SDS CHP2200-01 (English) SDS CHP2200-10 (English) SDS CHP2200-20 (English) SDS CHP2200-70 (English) SDS CHP2200-75 (English) SDS CHP2200-78 (English) SDS CHP2200-7B (English) SDS CHP2200-80 (English) SDS CHP2200-8B (English) SDS CHP2200-9B (English) SDS HP2200-01 (English) SDS HP2200-10 (English) SDS HP2200-20 (English) SDS HP2200-30 (English) SDS HP2200-70 (English) SDS HP2200-75 (English) SDS HP2200-7B (English) SDS HP2200-80 (English) SDS HP2200-8B (English) SDS HP2200-9B (English)  TECHNICAL DATA SHEETS TDS CHP2200.78 (English) TDS CHP2200 (English) TDS HP2200 (English)

Read more less

Alkyd Urethane Enamel is a versatile maintenance coating for interior and exterior surfaces. The surface-tolerant formula adheres to metal surfaces that may be marginally prepared, and the exceptional flow and leveling provides a smooth, uniform finish, with excellent protective qualities. This rust preventative coating can be applied directly to ferrous metal or used in combination with a Benjamin Moore® HP metal primer for increased corrosion protection. HP ALK URETHANE Enamel Satin Dual purpose- primer and finish coat Durable rust preventative coating Versatile protection for metal substrates View the sell sheet or additional tools for more information Features Available Colors: White (01), Bronzetone (62), Black (80) Sheen (or Gloss): Satin Cleanup: Mineral Spirits Resin Type: Alkyd Urethane Recommended Use: Interior, Exterior MPI Rating: VOC Range: 369 g/L  SAFETY DATA SHEETS SDS HP2220-01 (English) SDS HP2220-62 (English) SDS HP2220-7B (English) SDS HP2220-80 (English) SDS HP2220-81 (English) SDS HP2220-8B (English) SDS HP2220-9B (English)  TECHNICAL DATA SHEETS TDS HP2220 (English)

Read more less

Extremely durable single-component multi-substrate solution to help you save time and tackle multiple jobs with confidence. This interior/exterior UV-resistant acrylic enamel provides tenacious adhesion and abrasion resistance on a variety of substrates, making it ideal for facility maintenance and property management applications where minimal maintenance, limited disruptions, and a quick return to service are required. HP COMMAND WB  Acrylic Urethane Satin Quick dry. Dries to touch in 15 minutes Return to service: vertical surfaces in just 1 hour; foot and forklift traffic-ready in 24 hours Flexible—resists cracking and peeling Block Resistant—fast, tack-free formula Interior/exterior Low-temperature application (35°F) Tenacious adhesion Engineered with Gennex® Color Technology Learn more View the sell sheet for more information Features Available Colors: White (01), Bronzetone (62), Black (80) Sheen (or Gloss): Satin Cleanup: Soap and Water Resin Type: Acrylic Urethane Recommended Use: Interior, Exterior MPI Rating: 161 VOC Range: < 50 g/L  SAFETY DATA SHEETS SDS HP3920-01 (English) SDS HP3920-62 (English) SDS HP3920-7X (English) SDS HP3920-80 (English) SDS HP3920-8X (English) SDS HP3920-9X (English)  TECHNICAL DATA SHEETS TDS HP3920 (English)

Read more less

A premium exterior alkyd primer ideal for tannin-rich woods, offering outstanding stain suppression and excellent penetration for maximum adhesion and a long-lasting finish, even on weathered and chalky surfaces. Features For use on new or previously coated exterior wood Penetrates wood surfaces for maximum adhesion and a longer lasting finish Excellent stain suppressor Seals uniformly Details Available Colors: White, Deep Base Sheen (or Gloss): Primer Cleanup: Solvent Resin Type: Alkyd Recommended Use: Exterior Data Sheets SDS SDS 094-00 (English) SDS 094-00 (Español) TDS TDS 094 (English)

Read more less

AURA Exterior Paint Low Lustre Benjamin Moore's exclusive lab-perfected resin Excellent fade resistance and gloss retention Benjamin Moore's proprietary Color Lock® technology Provides unparalleled color depth and reduced chalking to ensure stunning results that stand the test of time Substantial film formation starting with the very first coat Finish jobs faster, using less paint Improved block resistance and reduced tack Increase job site efficiency and to minimize disruption Permeable coating Breathable coating is less prone to blistering, providing long-term durability and protection Engineered with Gennex® Color Technology Contributes to superior hide and color retention across Benjamin Moore colors View the sell sheet for more information FEATURES   Available Colors: Available in thousands of colors, Ready Mix White Sheen (or Gloss): Low Lustre Cleanup: Soap and Water Resin Type: Proprietary 100% Acrylic Recommended Use: Exterior MPI Rating: 315 VOC Level: 46.8 Color available: Available in thousands of colors, Ready Mix White DATASHEETS SAFETY DATA SHEET: N63401_SDS_EN.pdf N63401_SDS_SP.pdf N6341X_SDS_EN.pdf N6341X_SDS_SP.pdf N6342X_SDS_EN.pdf N6342X_SDS_SP.pdf N6343X_SDS_EN.pdf N6343X_SDS_SP.pdf N6344X_SDS_EN.pdf N6344X_SDS_SP.pdf TECHNICAL DATA SHEET: N634_TDS_US.pdf OTHER DATA SHEET:

Read more less

Benjamin Moore Paint Extender for Latex Paints—a professional-grade solution designed to elevate your painting experience. This innovative waterborne conditioner enhances the performance of latex paints, delivering flawless results for both DIY enthusiasts and seasoned pros. Benjamin Moore Paint Extender is formulated to extend the open time of your paint, it ensures smoother application, even in challenging conditions like high heat or low humidity. Say goodbye to lap marks and brush strokes as this extender improves flow and leveling, leaving a seamless, polished finish on every project. Paint Extender Specially formulated to enhance the application properties of our premium products without adverse effects on dry film properties Proprietary 100% acrylic Very low VOC For interior and exterior use FEATURES Available Colors: Clear Sheen (or Gloss): N/A Cleanup: Soap and Water Resin Type: Proprietary Acrylic Latex Recommended Use: Interior, Exterior MPI Rating: VOC Level: 6.0 Color available: Clear DATASHEETS SAFETY DATA SHEET: 51800_SDS_EN.pdf 51800_SDS_SP.pdf TECHNICAL DATA SHEET: 518_TDS_US.pdf OTHER DATA SHEET:

Read more less

TuffCrete® Waterborne Acrylic Concrete Stain is a water-reduced acrylic concrete coating designed for application to interior or exterior masonry surfaces. It can be applied in one coat as a stain, or in two coats for an opaque finish. Select one of the "ready-made" colors or specify another color choice in the  order notes - we are able to make many colors in this product using a mixing base. Waterborne acrylic formula Color fade resistance Fast-drying Rugged, durable finish Resists detergents, oils, grease, and scrubbing For interior or exterior masonry surfaces Use on Concrete, Brick or Stucco walls & walkways Coverage approx 300-500sf Details Available Colors: Tintable White, Gray Pearl, Light Gray, Tile Red, Desert Sand, Saddle Brown, Deep Base, Neutral Base, Clear (High Gloss) Sheen (or Gloss): Low Sheen Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior Sell Sheet & Color Chart Data Sheets SDS CCST-2110 (English) SDS CCST-2110 (Español) SDS CCST-2112 (English) SDS CCST-2112 (Español) SDS CCST-2190 (English) SDS CCST-2190 (Español) SDS CCST-2308 (English) SDS CCST-2308 (Español) SDS CCST-2310 (English) SDS CCST-2310 (Español) SDS CCST-2505 (English) SDS CCST-2505 (Español) SDS CCST-2922 (English) SDS CCST-2922 (Español) SDS CCST-2998 (English) SDS CCST-2998 (Español) SDS CST-2100 (English) SDS CST-2100 (Español) SDS CST-2110 (English) SDS CST-2110 (Español) SDS CST-2112 (English) SDS CST-2112 (Español) SDS CST-2190 (English) SDS CST-2190 (Español) SDS CST-2308 (English) SDS CST-2308 (Español) SDS CST-2310 (English) SDS CST-2310 (Español) SDS CST-2505 (English) SDS CST-2505 (Español) SDS CST-2789 (English) SDS CST-2789 (Español) SDS CST-2922 (English) SDS CST-2922 (Español) SDS CST-2998 (English) SDS CST-2998 (Español)

Read more less

Quick Dry Alkyd Enamel is a quick-dry, rust-preventative enamel formulated for use on ferrous metal substrates. It provides corrosion protection for both interior and exterior steel surfaces. Quick Dry Alkyd Enamel may be applied to new, properly prepared or previously coated surfaces. HP Quick Dry Alkyd Enamel Gloss Tough, durable film with outstanding adhesion Self-priming with easy application Dries to touch in 15 minutes View the additional tools for more information Features Available Colors: White (01), Safety Yellow (10), Safety Red (20), Safety Orange (50), Light Gray (71), Battleship Gray (75), Black (80) Sheen (or Gloss): Gloss Cleanup: Mineral Spirits Resin Type: Alkyd Recommended Use: Interior, Exterior MPI Rating: VOC Range: < 400 g/L  SAFETY DATA SHEETS SDS CHP2300-01 (English) SDS CHP2300-10 (English) SDS CHP2300-71 (English) SDS CHP2300-75 (English) SDS CHP2300-7B (English) SDS CHP2300-80 (English) SDS CHP2300-8B (English) SDS CHP2300-9B (English) SDS HP2300-01 (English) SDS HP2300-10 (English) SDS HP2300-20 (English) SDS HP2300-50 (English) SDS HP2300-71 (English) SDS HP2300-75 (English) SDS HP2300-7B (English) SDS HP2300-80 (English) SDS HP2300-8B (English) SDS HP2300-9B (English)  TECHNICAL DATA SHEETS TDS CHP2300 (English) TDS HP2300 (English)

Read more less

Acrylic DTM Enamel is a high-performance, direct-to-metal acrylic finish formulated for application to a wide variety of metals and other substrates. The coating performs very well in light to moderate industrial exposures and is ideal for commercial and facility applications. Additionally, the product is formulated to prevent flash rusting when applied to ferrous metals and provide long term corrosion protection. The waterborne formulation ensures easy application and easy clean-up. HP DTM Acrylic Enamel - Satin Highly moisture resistant Flash rust resistant Can be applied to a wide variety of substrates Features Available Colors: White (01), Bronzetone (62), Black (80), Bases 7X, 8X, 9X Sheen (or Gloss): Satin Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior MPI Rating: 141 VOC Range: 96 g/L  SAFETY DATA SHEETS SDS HP3320-01 (English) SDS HP3320-62 (English) SDS HP3320-7X (English) SDS HP3320-80 (English) SDS HP3320-8X (English) SDS HP3320-9X (English)  TECHNICAL DATA SHEETS TDS HP3320 (English)

Read more less

Extremely durable single-component multi-substrate solution to help you save time and tackle multiple jobs with confidence. This interior/exterior UV-resistant acrylic enamel provides tenacious adhesion and abrasion resistance on a variety of substrates, making it ideal for facility maintenance and property management applications where minimal maintenance, limited disruptions, and a quick return to service are required. HP COMMAND WB Acrylic Urethane Gloss  Quick dry. Dries to touch in 15 minutes Return to service: vertical surfaces in just 1 hour; foot and forklift traffic-ready in 24 hours Flexible—resists cracking and peeling Block Resistant—fast, tack-free formula Interior/exterior Low-temperature application (35°F) Tenacious adhesion Engineered with Gennex® Color Technology Learn more View the sell sheet for more information Features Available Colors: White (01), Safety Yellow (10), Safety Red (20), Black (80) Sheen (or Gloss): Gloss Cleanup: Soap and Water Resin Type: Acrylic Urethane Recommended Use: Interior, Exterior MPI Rating: 164 VOC Range: < 50 g/L  SAFETY DATA SHEETS SDS HP3900-01 (English) SDS HP3900-10 (English) SDS HP3900-20 (English) SDS HP3900-7X (English) SDS HP3900-80 (English) SDS HP3900-8X (English) SDS HP3900-9X (English)  TECHNICAL DATA SHEETS TDS HP3900 (English)

Read more less