Specialty Paint

  GarageGuard® Water Based 2 Part Epoxy is a new generation water- based catalyzed epoxy which offers performance equal to traditional solvent based epoxy systems. It provides superior chemical, abrasion and impact resistance when compared to conventional waterborne epoxies. The highly cross-linked film provides years of service. GarageGuard® Water Based 2 Part Epoxy produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling. This product is suitable for use in USDA inspected facilities. This is a two component product with a mix ratio of 3:1. It requires 3 parts of the proper “A” or Base Component (underfilled gallon can) mixed with 1 part of the proper “B” or Converter Component (quart). Mixing of Partial Kits Is Not Recommended.  Waterborne 2-part epoxy Durable semi-gloss finish, abrasion & impact resistant  Will not lift existing coatings Resists hot tire pick-up from cars Resists most automobile fluids Recoat in 8 hours; park vehicles in 3 days For Garage Floors, Basement Floors and Other Concrete Surfaces Coverage: 250-300sq.ft. per gallon Dry Times:  Tack Free: 2 hours Recoat: 8 hours Foot Traffic: 24 hours Vehicular Traffic: 72 hours Recommended For: GarageGuard Waterborne Epoxy is designed for use on basement floors, garage floors and other concrete surfaces. Ideal for use in food and beverage processing, transportation, warehouses, industrial refurbishment, healthcare, schools, large commercial structures, industrial and commercial flooring, and other areas where a performance epoxy is needed.    Limitations: Do not apply when air, surface or product temperature is below 50 °F Use the entire gallon of GarageGuard® within 4 hours of initial mixing. Mixing of Partial Kits Is Not Recommended. Not recommended for use in immersion service or acidic exposures. Cleanup: Water Resin Type: Amine Adduct Epoxy Recommended Use: Interior Sheen: Semi-gloss Available Colors: Showroom Gray, Desert Sand, Custom Colors MPI Rating: N/A VOC Level: < 250 g/L

Read more less

Meoded Pearlas Velvet Mettallic Finish is a Low VOC decorative metallic faux finishing product that produces a look of soft suede metallic Venetian Plaster. Velvet is the ideal wall treatment for formal living and dining rooms, upscale boutiques, posh hotel lobbies, and other spaces where refined style and beauty is desired. With fine metallic powders, its tremendous depth of color allows Velvet to exhibit two or more colors when reflected in various lights. Suede Finish Satin Sheen Low VOC Water based Coverage: 240 SF/Gal and 60 ft/qt Minimum 2 coats recommended Application: Primer should be used before first coat of Pearlas; new drywall should receive PVA type & oil-based primer over previous oil-type paints or stains Apply first coat with trowel and allow to dry at least one (1) hour before applying second coat. Apply material in small amounts with the trowel with varied movements, and then use a clean trowel to achieve desired movement throughout finish.

Read more less

Meoded’s Sapphire Metallic is combined with clear glass beads to create a beautiful textured Sahara Effect. The Sahara Effect creates a pearlescent rough yet elegant texture on your wall.  Best applied using a chip or spalter brush - can be applied in horizontal, vertical, crisscross (2 coats) or irregular fashion. 

Read more less

Meoded Sapphire Metallic is a pearlescent paint made with fine mica powders that gives walls, metal, trim, furniture or any other paintable surface a rich, beautiful pearl luster and opulent look of shimmering satin with less environmental impact. Special Color Information:  Most of the colors shown on our selector tool are custom mixed to the color shown. However, the SM-1500, SM-1600 and SM-1700 are considered Flash Translucent colors and are a topcoat metallic hue. The two (2) color variations shown on our color selector, such as 1500 or 1500B, are achieved using a first "base" coat of latex white or black paint or another Meoded Sapphire Metallic (white or black). If another base color is selected, then the top coat will show that color with the hue of either Gold, Bronze or Blue. Feel free to e-mail us with any questions. SM-1500 Flash Gold SM-1600 Flash Bronze SM-1700 Flash Blue Product features: Satin Finish Low VOC Water based Coverage: 300 SF/Gal and 75 ft/qt Minimum 2 coats recommended  

Read more less

Benjamin Moore Paint Extender for Latex Paints—a professional-grade solution designed to elevate your painting experience. This innovative waterborne conditioner enhances the performance of latex paints, delivering flawless results for both DIY enthusiasts and seasoned pros. Benjamin Moore Paint Extender is formulated to extend the open time of your paint, it ensures smoother application, even in challenging conditions like high heat or low humidity. Say goodbye to lap marks and brush strokes as this extender improves flow and leveling, leaving a seamless, polished finish on every project. Paint Extender Specially formulated to enhance the application properties of our premium products without adverse effects on dry film properties Proprietary 100% acrylic Very low VOC For interior and exterior use FEATURES Available Colors: Clear Sheen (or Gloss): N/A Cleanup: Soap and Water Resin Type: Proprietary Acrylic Latex Recommended Use: Interior, Exterior MPI Rating: VOC Level: 6.0 Color available: Clear DATASHEETS SAFETY DATA SHEET: 51800_SDS_EN.pdf 51800_SDS_SP.pdf TECHNICAL DATA SHEET: 518_TDS_US.pdf OTHER DATA SHEET:

Read more less

Ultra Spec Masonry Int/Ext 100% Acrylic Sealer Designed to penetrate and seal the surface of new or previously painted masonry surfaces providing the proper foundation for subsequent finish coats. It can be applied to masonry with pH levels as high as 13. Reduces the porosity of masonry surfaces Provides excellent surface adhesion Tintable High Alkali Resistance - pH 13 Engineered with Gennex® Color Technology Recommended for:For application to new or previously painted masonry surfaces including; tilt-up concrete construction, stucco surfaces and block construction. FEATURES   Available Colors: Clear, White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Exterior MPI Rating: 3 VOC Level: 46.0 Color available: Clear, White DATASHEETS SAFETY DATA SHEET: 60800_SDS_EN.pdf 60800_SDS_SP.pdf 60801_SDS_EN.pdf 60801_SDS_SP.pdf TECHNICAL DATA SHEET: 608_TDS_US.pdf

Read more less

Floor & Patio Low Sheen Enamel Easy application – Goes on Smoothly Resistant to soaps and detergents, grease and oil Durable Finish – Resists marring and scratching and delivers lasting finish Low VOC – Environmentally friendly Interior/Exterior Use – Can be used over multiple substrates Engineered with Gennex® Color Technology View the sell sheet for more information Recommended for:Particularly recommended for basements, porches, patios, breezeways, showrooms, and light industrial applications.   FEATURES  Available Colors: White 01, Light Gray 70, Deck Gray 71, Platinum Gray 74 Sheen (or Gloss): Low Sheen Cleanup: Soap and Water Resin Type: Waterborne Acrylic Urethane Recommended Use: Interior, Exterior MPI Rating: 60 VOC Level: 44.0 Color available: White 01, Light Gray 70, Deck Gray 71, Platinum Gray 74 DATASHEETS SAFETY DATA SHEET: N12201_SDS_EN.pdf N12201_SDS_SP.pdf N1221X_SDS_EN.pdf N1221X_SDS_SP.pdf N1222X_SDS_EN.pdf N1222X_SDS_SP.pdf N1223X_SDS_EN.pdf N1223X_SDS_SP.pdf N1224X_SDS_EN.pdf N1224X_SDS_SP.pdf N12270_SDS_EN.pdf N12270_SDS_SP.pdf N12271_SDS_EN.pdf N12271_SDS_SP.pdf N12274_SDS_EN.pdf N12274_SDS_SP.pdf TECHNICAL DATA SHEET: N122_TDS_US.pdf OTHER DATA SHEET:

Read more less

TuffCrete® Solvent Acrylic Concrete Waterproofing Stain is a solvent-borne acrylic concrete stain designed for deep penetration into concrete surfaces. With excellent adhesion, this product delivers outstanding durability in a low-sheen finish that helps to hide surface defects. It can be applied in one coat as a stain, or in two coats for an opaque finish. Select one of the "ready-made" colors or specify another color choice in the  order notes - we are able to make many colors in this product using the neutral base. Excellent adhesion Durable low-sheen finish Color fade resistance Quick-drying Deep concrete penetration Superior wear resistance Details Available Colors: White, Gray Pearl, Light Gray, Tile Red, Terracotta, Desert Sand, Saddle Brown, Neutral Base, Clear (High Gloss) Sheen (or Gloss): Low Sheen Cleanup: Solvent Resin Type: Acrylic Recommended Use: Interior, Exterior Data Sheets SDS SDS CST-5100 (English) SDS CST-5100 (Español) SDS CST-5110 (English) SDS CST-5110 (Español) SDS CST-5190 (English) SDS CST-5190 (Español) SDS CST-5308 (English) SDS CST-5308 (Español) SDS CST-5310 (English) SDS CST-5310 (Español) SDS CST-5505 (English) SDS CST-5505 (Español) SDS CST-5509 (English) SDS CST-5509 (Español) SDS CST-5789 (English) SDS CST-5789 (Español) SDS CST-5922 (English) SDS CST-5922 (Español) SDS CST-5998 (English) SDS CST-5998 (Español)

Read more less

Fire Retardant Paint expands and forms a thick cellular char blanket, called intumescence, when attacked by flame. This latex paint retards flame spread, minimizes smoke development, and applies like a conventional latex flat paint. Features Slows the spread of fire and smoke Chemical reaction forms intumescence For commercial and residential use Low-VOC Dries to a decorative flat finish Details Available Colors: White Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior Data Sheets SDS SDS FR-210 (English) SDS FR-210 (Español) TDS TDS FR-210 (English)

Read more less