Specialty Paint

  GarageGuard® Water Based 2 Part Epoxy is a new generation water- based catalyzed epoxy which offers performance equal to traditional solvent based epoxy systems. It provides superior chemical, abrasion and impact resistance when compared to conventional waterborne epoxies. The highly cross-linked film provides years of service. GarageGuard® Water Based 2 Part Epoxy produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling. This product is suitable for use in USDA inspected facilities. This is a two component product with a mix ratio of 3:1. It requires 3 parts of the proper “A” or Base Component (underfilled gallon can) mixed with 1 part of the proper “B” or Converter Component (quart). Mixing of Partial Kits Is Not Recommended.  Waterborne 2-part epoxy Durable semi-gloss finish, abrasion & impact resistant  Will not lift existing coatings Resists hot tire pick-up from cars Resists most automobile fluids Recoat in 8 hours; park vehicles in 3 days For Garage Floors, Basement Floors and Other Concrete Surfaces Coverage: 250-300sq.ft. per gallon Dry Times:  Tack Free: 2 hours Recoat: 8 hours Foot Traffic: 24 hours Vehicular Traffic: 72 hours Recommended For: GarageGuard Waterborne Epoxy is designed for use on basement floors, garage floors and other concrete surfaces. Ideal for use in food and beverage processing, transportation, warehouses, industrial refurbishment, healthcare, schools, large commercial structures, industrial and commercial flooring, and other areas where a performance epoxy is needed.    Limitations: Do not apply when air, surface or product temperature is below 50 °F Use the entire gallon of GarageGuard® within 4 hours of initial mixing. Mixing of Partial Kits Is Not Recommended. Not recommended for use in immersion service or acidic exposures. Cleanup: Water Resin Type: Amine Adduct Epoxy Recommended Use: Interior Sheen: Semi-gloss Available Colors: Showroom Gray, Desert Sand, Custom Colors MPI Rating: N/A VOC Level: < 250 g/L

Read more less

Benjamin Moore Paint Extender for Latex Paints—a professional-grade solution designed to elevate your painting experience. This innovative waterborne conditioner enhances the performance of latex paints, delivering flawless results for both DIY enthusiasts and seasoned pros. Benjamin Moore Paint Extender is formulated to extend the open time of your paint, it ensures smoother application, even in challenging conditions like high heat or low humidity. Say goodbye to lap marks and brush strokes as this extender improves flow and leveling, leaving a seamless, polished finish on every project. Paint Extender Specially formulated to enhance the application properties of our premium products without adverse effects on dry film properties Proprietary 100% acrylic Very low VOC For interior and exterior use FEATURES Available Colors: Clear Sheen (or Gloss): N/A Cleanup: Soap and Water Resin Type: Proprietary Acrylic Latex Recommended Use: Interior, Exterior MPI Rating: VOC Level: 6.0 Color available: Clear DATASHEETS SAFETY DATA SHEET: 51800_SDS_EN.pdf 51800_SDS_SP.pdf TECHNICAL DATA SHEET: 518_TDS_US.pdf OTHER DATA SHEET:

Read more less

Fire Retardant Paint expands and forms a thick cellular char blanket, called intumescence, when attacked by flame. This latex paint retards flame spread, minimizes smoke development, and applies like a conventional latex flat paint. Features Slows the spread of fire and smoke Chemical reaction forms intumescence For commercial and residential use Low-VOC Dries to a decorative flat finish Details Available Colors: White Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior Data Sheets SDS SDS FR-210 (English) SDS FR-210 (Español) TDS TDS FR-210 (English)

Read more less