Specialty Paint

GarageGuard® Water Based 2 Part Epoxy is a new generation water- based catalyzed epoxy which offers performance equal to traditional solvent based epoxy systems. It provides superior chemical, abrasion and impact resistance when compared to conventional waterborne epoxies. The highly cross-linked film provides years of service. GarageGuard® Water Based 2 Part Epoxy produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling. This product is suitable for use in USDA inspected facilities. This is a two component product with a mix ratio of 3:1. It requires 3 parts of the proper “A” or Base Component (underfilled gallon can) mixed with 1 part of the proper “B” or Converter Component (quart). Mixing of Partial Kits Is Not Recommended.  Waterborne 2-part epoxy Durable semi-gloss finish, abrasion & impact resistant  Will not lift existing coatings Resists hot tire pick-up from cars Resists most automobile fluids Recoat in 8 hours; park vehicles in 3 days For Garage Floors, Basement Floors and Other Concrete Surfaces Coverage: 250-300sq.ft. per gallon Dry Times:  Tack Free: 2 hours Recoat: 8 hours Foot Traffic: 24 hours Vehicular Traffic: 72 hours Recommended For: GarageGuard Waterborne Epoxy is designed for use on basement floors, garage floors and other concrete surfaces. Ideal for use in food and beverage processing, transportation, warehouses, industrial refurbishment, healthcare, schools, large commercial structures, industrial and commercial flooring, and other areas where a performance epoxy is needed.    Limitations: Do not apply when air, surface or product temperature is below 50 °F Use the entire gallon of GarageGuard® within 4 hours of initial mixing. Mixing of Partial Kits Is Not Recommended. Not recommended for use in immersion service or acidic exposures. Cleanup: Water Resin Type: Amine Adduct Epoxy Recommended Use: Interior Sheen: Semi-gloss Available Colors: Showroom Gray, Desert Sand, Custom Colors MPI Rating: N/A VOC Level: < 250 g/L

Read more less

Ultra Spec HP D.T.M. Acrylic Semi-Gloss Direct to metal application Improved gloss and color retention Easy application Provides superior rust inhibition and control Primer and finish coat Fast dry Excellent adhesion MPI: 141, 153, 163 Engineered with Gennex® Color Technology Recommended for:Ferrous or non-ferrous metal, Bilco® doors, railings, structural or support steel, wood, roof decks, equipment, fencing, metal storage shed and general maintenance painting interior or exterior surfaces. FEATURES   Available Colors: 08 Safety White, 15 Safety Yellow, 21 Safety Red, 60 Bronzetone and 82 Safety Black Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Interior, Exterior MPI Rating: 141, 153 VOC Level: 147.0 Color available: 08 Safety White, 15 Safety Yellow, 21 Safety Red, 60 Bronzetone and 82 Safety Black DATASHEETS SAFETY DATA SHEET: HP2908_SDS_EN.PDF HP2908_SDS_SP.PDF HP2915_SDS_EN.PDF HP2915_SDS_SP.PDF HP291X_SDS_EN.PDF HP291X_SDS_SP.PDF HP2921_SDS_EN.PDF HP2921_SDS_SP.PDF HP292X_SDS_EN.PDF HP292X_SDS_SP.PDF HP2930_SDS_EN.PDF HP2930_SDS_SP.PDF HP293X_SDS_EN.PDF HP293X_SDS_SP.PDF HP2941_SDS_EN.PDF HP2941_SDS_SP.PDF HP294X_SDS_EN.PDF HP294X_SDS_SP.PDF HP2964_SDS_EN.PDF HP2964_SDS_SP.PDF HP2982_SDS_EN.PDF HP2982_SDS_SP.PDF TECHNICAL DATA SHEET: HP29_TDS_US.pdf OTHER DATA SHEET:

Read more less