Primers and Sealers

Romabio Masonry Flat is an extremely durable, beautiful, permanent flat finish for Interior/Exterior masonry surfaces. It can be applied in 2-coats, no additional primer needed for absorbent masonry and comes with a 20-year warranty, when applied as directed. Romabio Masonry Flat is a breathable coating that calcifies to masonry surfaces allowing moisture to release and will not peel, chip, or flake off. Ideal for brick, stone, stucco, and cementitious siding/Hardie board. Easy to apply with brush, roller, or sprayer. Touch ups can be done at any time. For pre-painted surfaces, apply one coat of Romabio MicroGrip Primer first. Handcrafted in Italy. COVERAGE (1 Coat): 1 Liter: 65-85 sq ft 2.5 Liters: 165-215 sq ft 15 Liters: 1000-1300 sq ft

Read more less

MicroGrip Primer is a universal mineral primer for Interior/Exterior use. Recommended for previously painted surfaces such as drywall, painted brick, painted stone, cement board (i.e. Hardie) Product must be diluted with water Dry Time 8-12hrs Sizes & Coverage 1L = 70-120sfsf 2.5L = 175-300sf 15L = 1050-1800sf

Read more less

Mineral Shield is an invisible top coating that locks and protects beautiful Romabio mineral paint finishes from natural patina, or weathering created by water. The breathable coating repels water droplets but still allows water vapor to pass through, protecting the painted surface and preventing the growth of algae, moss, and mold.  Prevents the growth of algae, moss, and mold, keeping paint looking clean and fresh Repels water, reducing patina and extending the life of paint and ensuring a longer-lasting finish Invisible, clear coating won’t discolor exterior painted surfaces Significantly reduces staining from clay, dirt and grass Coverage approximately 200-300sf per gallon Designed for use together with Romabio Limewash, Masonry Flat, Masonry Textured or Lime Slurry products.

Read more less

Velatura Mineral Wash is an authentic mineral-based paint to create mottling or subtle movement effects for a limewash look on Interior drywall in two easy steps with no additional primer. An artistic applicator can paint soft tonal color variations in a brush-applied crosshatch technique for the 1st coat and can use varied techniques with a brush, cloth, or rag for the 2nd coat. Recommended in bedrooms, living rooms, and other common areas (Not recommended for high-traffic)   Toxin-free, Zero-VOC, and environmentally friendly   Brush-applied in two easy steps with no primer Multiple applicators can work the same wall and achieve similar effects Best surface is interior gypsum drywall that is primed For pre-painted surfaces, apply one coat of Romabio MicroGrip Primer first. Handcrafted in Italy. Sizes & Coverage (1 Coat): 1 Liter: 100-140 sq ft 2.5 Liters: 250-350 sq ft 15 Liters: 1500-2100 sq ft Application: PREP: Make sure the surface is clean and ready to be painted.  1st COAT: Apply undiluted or add up to 5% water in a crosshatch technique to fully cover the wall. Let dry to touch before next coat.  2nd COAT: Must dilute 50%-80% with water and then paint in crosshatch technique and use cloth technique if needed.  TOOLS: Apply with a brush for 1st Coat and brush and/or cloth for 2nd coat.  DRY TIME: 4-6 Hours TOUCH UPS: Very flat finish. 

Read more less