Primers and Sealers
Benjamin Moore Coronado Final Touch - Flat
$149.95$25.97
Old Masters Old Masters Penetrating Clear Sealer - QT - 92604
Clear, penetrating oil formulated with natural Tung Oil Suitable for both interior and exterior applications On wood surfaces this product seals out moisture to enhance the life and natural appearance of wood, while preventing staining and checking On masonry and concrete it will produce a moisture seal that reduces dusting, staining and efflorescence Also hardens masonry and natural rock surfaces and reduces frost damage Contains ultra violet absorbers for advanced sun protection
$34.99$29.99
Romabio Romabio EcoForte Primer-Hardener
Romabio EcoForte Primer-Hardener is a zero-odor, bio-based concentrate of potassium silicate that is mixed with water on the project site. It serves as mineral hardener, clear coat protective solution to extend the life of Romabio Classico Limewash patina on high-traffic horizontal surfaces or erosive areas. Applied directly onto brick, EcoForte Prier-Hardener can help protect against spalding, particularly on low-fired brick, consolidating the brick surface and providing water resistance simultaneously. It is historically known as water glass or liquid glass. When applied to an unpainted mineral surface it forms a chemical reaction with the substrate essentially reinforcing and strengthening the inherent mineral aspects of brick, stone and most cements. Coverage: 1L 150-200sf 2.5L 375-500sf 10L 1500-2000sf
$34.99$28.99
Romabio Romabio MicroGrip Primer
MicroGrip Primer is a universal mineral primer for Interior/Exterior use. Recommended for previously painted surfaces such as drywall, painted brick, painted stone, cement board (i.e. Hardie) Product must be diluted with water Dry Time 8-12hrs Coverage 1L = 70-120sfsf 2.5L = 175-300sf 15L = 1050-1800sf
$34.99$27.99
Romabio Romabio Mineral Shield - GAL
Mineral Shield is an invisible top coating that locks and protects beautiful Romabio mineral paint finishes from natural patina, or weathering created by water. The breathable coating repels water droplets but still allows water vapor to pass through, protecting the painted surface and preventing the growth of algae, moss, and mold. Prevents the growth of algae, moss, and mold, keeping paint looking clean and fresh Repels water, reducing patina and extending the life of paint and ensuring a longer-lasting finish Invisible, clear coating won’t discolor exterior painted surfaces Significantly reduces staining from clay, dirt and grass Coverage is approximately 200-300sf per gallon
$49.99
Romabio Romabio Velatura Mineral Wash
Romabio Masonry Flat is an extremely durable, beautiful, permanent flat finish for Interior/Exterior masonry surfaces. It can be applied in 2-coats, no additional primer needed for absorbent masonry and comes with a 20-year warranty, when applied as directed. Romabio Masonry Flat is a breathable coating that calcifies to masonry surfaces allowing moisture to release and will not peel, chip, or flake off. Ideal for brick, stone, stucco, and cementitious siding/Hardie board. Easy to apply with brush, roller, or sprayer. Touch ups can be done at any time. For pre-painted surfaces, apply one coat of Romabio MicroGrip Primer first. Handcrafted in Italy. COVERAGE (1 Coat): 1 Liter: 65-85 sq ft 2.5 Liters: 165-215 sq ft 15 Liters: 1000-1300 sq ft
$95.99$47.99
Benjamin Moore Ultra Spec Masonry Elastomeric Waterproof Coating Flat
Ultra Spec Masonry Elastomeric Waterproof Coating Flat A high-build, elastomeric coating that is designed to beautify and protect masonry structures from damage due to weathering and moisture intrusion. When applied as directed, at up to 20 mils wet film thickness per coat, this product fills pores and bridges minor surface cracks to create a monolithic film that protects masonry from the weather's deteriorating effects. Reduces the porosity of masonry surfaces Breathable finish allows interior moisture to escape without damage to the film Provides a waterproof finish that protects structures from moisture damage Provides a mildew-resistant coating 200% elongation Bridges cracks up to 1/32" Provides excellent surface adhesion High Alkali Resistance - pH 13 Higher hiding Tintable Engineered with Gennex® Color Technology Recommended for:For use on exterior masonry surfaces such as smooth stucco, concrete block, pre-cast concrete, poured in place concrete and tilt-up construction. FEATURES Available Colors: White Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Exterior MPI Rating: VOC Level: 93.0 Color available: White DATASHEETS SAFETY DATA SHEET: 35901_SDS_EN.pdf 35901_SDS_SP.pdf 3591X_SDS_EN.pdf 3591X_SDS_SP.pdf 3592X_SDS_EN.pdf 3592X_SDS_SP.pdf 3593X_SDS_EN.pdf 3593X_SDS_SP.pdf 35941_SDS_EN.pdf 35941_SDS_SP.pdf 35942_SDS_EN.pdf 35942_SDS_SP.pdf 35943_SDS_EN.pdf 35943_SDS_SP.pdf 35944_SDS_EN.pdf 35944_SDS_SP.pdf 35945_SDS_EN.pdf 35945_SDS_SP.pdf 35946_SDS_EN.pdf 35946_SDS_SP.pdf 35947_SDS_EN.pdf 35947_SDS_SP.pdf 3594X_SDS_EN.pdf 3594X_SDS_SP.pdf TECHNICAL DATA SHEET: 0359_TDS_US.pdf OTHER DATA SHEET:
$169.95