Primer

A premium exterior alkyd primer ideal for tannin-rich woods, offering outstanding stain suppression and excellent penetration for maximum adhesion and a long-lasting finish, even on weathered and chalky surfaces. Features For use on new or previously coated exterior wood Penetrates wood surfaces for maximum adhesion and a longer lasting finish Excellent stain suppressor Seals uniformly Details Available Colors: White, Deep Base Sheen (or Gloss): Primer Cleanup: Solvent Resin Type: Alkyd Recommended Use: Exterior Data Sheets SDS SDS 094-00 (English) SDS 094-00 (Español) TDS TDS 094 (English)

Read more less

Ultra Spec Masonry Int/Ext 100% Acrylic Sealer Designed to penetrate and seal the surface of new or previously painted masonry surfaces providing the proper foundation for subsequent finish coats. It can be applied to masonry with pH levels as high as 13. Reduces the porosity of masonry surfaces Provides excellent surface adhesion Tintable High Alkali Resistance - pH 13 Engineered with Gennex® Color Technology Recommended for:For application to new or previously painted masonry surfaces including; tilt-up concrete construction, stucco surfaces and block construction. FEATURES Available Colors: Clear, White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Exterior MPI Rating: 3 VOC Level: 46.0 Color available: Clear, White DATASHEETS SAFETY DATA SHEET: 60800_SDS_EN.pdf 60800_SDS_SP.pdf 60801_SDS_EN.pdf 60801_SDS_SP.pdf TECHNICAL DATA SHEET:608_TDS_US.pdf OTHER DATA SHEET:

Read more less

Prime All® Multi-Surface Latex Primer Sealer is a high-quality primer with great flow and leveling. It has strong adhesion and sealing properties while drying to the touch in less than an hour.FEATURES 100% acrylic Powerful stain blocking Low-VOC Dry to touch in less than 1 hour Spatter-resistant Mildew-resistant coating View the sell sheet for more information DETAILS Available Colors: White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: 100% Acrylic Recommended Use: Interior, Exterior MPI Rating: 6, 39, 137 VOC Level: 29.3 DATA SHEETS  SAFETY DATA SHEETS SDS AP-1000 (English)  TECHNICAL DATA SHEETS TDS AP-1000 (English)

Read more less

Shop Primer is formulated for use on interior or exterior ferrous metals in mild to moderate exposures that will be blasted at the job site and recoated. Topcoats containing strong solvents may cause lifting or wrinkling. Shop Primer Economical protective coat for bare ferrous metal Accepts most topcoats Dry to the touch in 30 minutes View the additional tools for more information Features Available Colors: Red (20), Gray (70) Sheen (or Gloss): N/A Cleanup: Solvent Resin Type: Alkyd Recommended Use: Interior, Exterior MPI Rating: VOC Range: > 250 g/L  SAFETY DATA SHEETS SDS CHP1420-20 (English) SDS CHP1420-70 (English) SDS HP1420-20 (English) SDS HP1420-70 (English)  TECHNICAL DATA SHEETS TDS CHP1420 (English) TDS HP1420 (English)

Read more less

Universal Metal Primer is a high-performance, one-component, quick-dry, rust-inhibitive metal primer, formulated for use on ferrous metal substrates. The phenolic alkyd resin formulation allows for a wide variety of intermediate and finish coats. Universal Metal Primer Fast 30-minute dry Use over many existing coatings Corrosion protection on all ferrous metals Accepts most topcoats View the additional tools for more information Features Available Colors: White (01), Red (20), Gray (70) Sheen (or Gloss): N/A Cleanup: Solvent Resin Type: Phenolic-Alkyd Recommended Use: Interior, Exterior MPI Rating: VOC Range: < 400 g/L  SAFETY DATA SHEETS SDS CHP1320-01 (English) SDS CHP1320-20 (English) SDS CHP1320-70 (English) SDS HP1320-01 (English) SDS HP1320-20 (English) SDS HP1320-70 (English)  TECHNICAL DATA SHEETS TDS CHP1320 (English) TDS HP1320 (English)

Read more less

Acrylic Sealer/Finish is an interior/exterior fast drying water-based low-sheen clear coating formulated as a seal coat and/or finish for bare concrete floors and other masonry surfaces. This product is designed for easy application, to reduce water penetration or erosion, efflorescence, spalling, and chalking without changing the natural appearance of the substrate. ACRYLIC SEALER/FINISH Rapid dry-Recoat in 2 hours For use on horizontal and vertical surfaces Can be used over a variety of substrates Ideal for floors View the additional tools for more information Features Available Colors: Clear (00) Sheen (or Gloss): N/A Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior MPI Rating: VOC Range: < 200 g/L  SAFETY DATA SHEETS SDS HP1270-00 (English)  TECHNICAL DATA SHEETS TDS HP1270 (English)

Read more less

Acrylic Metal Primer is a water reducible, rust inhibitive primer formulated for use on steel, iron, and non-ferrous metals. HP ACRYLIC METAL PRIMER  Rust inhibitive Recoat in 2 hours Excellent for ferrous and non-ferrous metals View the additional tools for more information Features Available Colors: White (01), Red (20) Sheen (or Gloss): N/A Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior MPI Rating: VOC Range: < 250 g/L  SAFETY DATA SHEETS SDS HP1100-01 (English) SDS HP1100-20 (English)  TECHNICAL DATA SHEETS TDS HP1100.01 (English) TDS HP1100.20 (English)

Read more less