Minced Onion - OC-128

Romabio Masonry Flat Paint is an authentic Italian, slaked-lime paint that is specially formulated to create unique white wash effects for Interior and Exterior brick, stone, and other masonry surfaces. It is designed to be easy-to-use and meant to be single coat application.  Once applied, Classico Limewash can be left as a solid coating or it can be distressed by brush, rag or hose water in areas to yield the desired effect. Romabio Masonry Flat Paint. Order as Bianca White or your preferred off-white to light pastel color Romabio - Look Book ▶ Application: No primer needed Two (2) Coat Process Dampen the brick surface prior to the 1st coat Apply with Brush, Roller or Paint sprayer The newer U.S. sizes are ready to use; max water dilution 5% Older Italian product sizes require dilution with 50–70% water Available sizes & coverage: 1 quart: 60–100 SQ FT 1 gallon: 200–250 SQ FT 5 gallon: 1200–1500 SQ FT Use together with Romabio Mineral Shield for a clear topcoat that protects the desired patina finish and resists stains or mildew. Use together with Romabio Masonry Brush specifically designed to use with Romabio lime-based paints.

Read more less

Romabio Classico Limewash Paint is an authentic Italian, slaked-lime paint that is specially formulated to create unique white wash effects for Interior and Exterior brick, stone, and other masonry surfaces. It is designed to be easy-to-use and meant to be single coat application.  Once applied, Romabio Classico Limewash Paint can be left as a solid coating or it can be distressed by brush, rag or hose water in areas to yield the desired effect.  Order as Bianca White or your preferred off-white to light pastel color Romabio - Look Book ▶ Application One (1) Coat Process Some customers apply this product in Two (2) Coats for a different look Apply with Brush, Roller or Paint sprayer Product needs to be diluted with 30–70% water depending on the desired look; test your solution on an area; test area can be hosed off unless it is allowed to dry for a day or longer...then you will need to use a pressure washer Classico Limewash sizes & Coverage: 1 Liter: 80–100 SQ FT 2.5 Liters: 200–400 SQ FT 15 Liters: 1200–1500 SQ FT Use together with Romabio Mineral Shield for a clear topcoat that protects the desired patina finish and resists stains or mildew. Use together with Romabio Masonry Brush specifically designed to use with Romabio lime-based paints.

Read more less

Romabio Masonry Textured Finish is an authentic Italian, slaked-lime paint that is specially formulated to create unique white wash effects for Interior and Exterior brick, stone, and other masonry surfaces. It is designed to be easy-to-use and meant to be single coat application.  Once applied, Classico Limewash can be left as a solid coating or it can be distressed by brush, rag or hose water in areas to yield the desired effect.  Order as Bianca White or your preferred off-white to light pastel color Romabio - Look Book ▶ Application: One (1) Coat Process Apply with Brush, Roller or Paint sprayer Product needs to be diluted with 30–70% water depending on the desired look; test your solution on an area; test area can be hosed off unless it is allowed to dry for a day or longer...then you will need to use a pressure washer Classico Limewash sizes & coverage: 1 Liter: 80–100 SQ FT 2.5 Liters: 200–250 SQ FT 15 Liters: 1200–1500 SQ FT Use together with Romabio Mineral Shield for a clear topcoat that protects the desired patina finish and resists stains or mildew. Use together with Romabio Masonry Brush specifically designed to use with Romabio lime-based paints.

Read more less

Velatura Mineral Wash is an authentic mineral-based paint to create mottling or subtle movement effects for a limewash look on Interior drywall in two easy steps with no additional primer. An artistic applicator can paint soft tonal color variations in a brush-applied crosshatch technique for the 1st coat and can use varied techniques with a brush, cloth, or rag for the 2nd coat. Recommended in bedrooms, living rooms, and other common areas (Not recommended for high-traffic)   Toxin-free, Zero-VOC, and environmentally friendly   Brush-applied in two easy steps with no primer Multiple applicators can work the same wall and achieve similar effects Best surface is interior gypsum drywall that is primed For pre-painted surfaces, apply one coat of Romabio MicroGrip Primer first. Handcrafted in Italy. Sizes & Coverage (1 Coat): 1 Liter: 100-140 sq ft 2.5 Liters: 250-350 sq ft 15 Liters: 1500-2100 sq ft Application: PREP: Make sure the surface is clean and ready to be painted.  1st COAT: Apply undiluted or add up to 5% water in a crosshatch technique to fully cover the wall. Let dry to touch before next coat.  2nd COAT: Must dilute 50%-80% with water and then paint in crosshatch technique and use cloth technique if needed.  TOOLS: Apply with a brush for 1st Coat and brush and/or cloth for 2nd coat.  DRY TIME: 4-6 Hours TOUCH UPS: Very flat finish. 

Read more less

Color-Changing Ceiling Paint is applied as a light pink color to indicate painted areas for preventing missed spots. It dries to a uniform, white finish in a flat sheen that helps minimize the appearance of surface imperfections. INSL-X Color Changing Ceiling Paint Flat Disappearing pink color-change technology Uniform, flat finish Self-priming For smooth or textured ceilings Spatter-resistant Low-VOC View the sell sheet for more information Features Available Colors: White Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior MPI Rating: VOC Range: < 50 g/L  SAFETY DATA SHEETS SDS PC-1200 (English)  TECHNICAL DATA SHEETS TDS PC-1200 (English)

Read more less

High-build, low-VOC breathable waterproofing coatings designed for application by the professional contractor to above grade concrete and masonry structures. These coatings are specifically engineered to be applied direct-to-concrete and masonry surfaces without priming. They are designed to resist high pH surfaces and therefore can be applied direct to new concrete without extended curing and delays. These coatings pass the ASTM D6904 wind driven rain test and are resistant to salt spray, acid rain, and UV light tested in 1 pinhole-free coat. The breathable, high-build film allows moisture vapor to pass through without blistering or causing a loss of adhesion. Available in various textures, these products do not require a primer or filler on smooth masonry surfaces. TEXCRETE WB MEDIUM Finish- Flat Breathable, high-build film Passes ASTM D6904 wind driven rain test and protects against salt spray, acid rain, and UV light Allows moisture to pass through without blistering or loss of adhesion Provides a mildew-resistant coating View the sell sheet for more information Features Available Colors: White & Limited Light Pastel Colors Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Exterior MPI Rating: 42 VOC Range: < 50 g/L  SAFETY DATA SHEETS SDS W3196-1 (English)  TECHNICAL DATA SHEETS TDS W3196 (English)

Read more less

ECO SPEC WB INT- Flat Low odor completely dissipates within an hour after application Zero VOC Zero Emissions Provides a mildew resistant coating Quick return to service Dries quickly to a beautiful, washable and uniform flat finish Spatter-resistant Engineered with Gennex® Color Technology View the residential brochure and the commercial brochure for more information Features Available Colors: All Colors, Ready Mixed White Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Interior MPI Rating: 53,142,143 VOC Range: 0 g/L  SAFETY DATA SHEETS SDS W373-01 (English) SDS W373-1X (English) SDS W373-2X (English) SDS W373-3X (English) SDS W373-4X (English)  TECHNICAL DATA SHEETS TDS W373 (English)

Read more less

High-build, low-VOC breathable waterproofing coatings designed for application by the professional contractor to above grade concrete and masonry structures. These coatings are specifically engineered to be applied direct-to-concrete and masonry surfaces without priming. They are designed to resist high pH surfaces and therefore can be applied direct to new concrete without extended curing and delays. These coatings pass the ASTM D6904 wind driven rain test and are resistant to salt spray, acid rain, and UV light tested in 1 pinhole-free coat. The breathable, high-build film allows moisture vapor to pass through without blistering or causing a loss of adhesion. Available in various textures, these products do not require a primer or filler on smooth masonry surfaces. TEXCRETE WB Sand Finish Flat  Breathable, high-build film Passes ASTM D6904 wind driven rain test and protects against salt spray, acid rain, and UV light Allows moisture to pass through without blistering or loss of adhesion Provides a mildew-resistant coating View the sell sheet for more information Features Available Colors: White, Deep Base, Accent Base Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Exterior MPI Rating: VOC Range: < 100 g/L  SAFETY DATA SHEETS SDS W3192-1 (English SDS W3192-34 (English) SDS W3192-36 (English)  TECHNICAL DATA SHEETS TDS W3192 (English)

Read more less

High-build, low-VOC breathable waterproofing coatings designed for application by the professional contractor to above grade concrete and masonry structures. These coatings are specifically engineered to be applied direct-to-concrete and masonry surfaces without priming. They are designed to resist high pH surfaces and therefore can be applied direct to new concrete without extended curing and delays. These coatings pass the ASTM D6904 wind driven rain test and are resistant to salt spray, acid rain, and UV light tested in 1 pinhole-free coat. The breathable, high-build film allows moisture vapor to pass through without blistering or causing a loss of adhesion. Available in various textures, these products do not require a primer or filler on smooth masonry surfaces. TEXCRETE WB Smooth Finish Flat Breathable, high-build film Passes ASTM D6904 wind driven rain test and protects against salt spray, acid rain, and UV light Allows moisture to pass through without blistering or loss of adhesion Provides a mildew-resistant coating View the sell sheet for more information Features Available Colors: White, Deep Base, Accent Base Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Exterior MPI Rating: VOC Range: < 100 g/L  SAFETY DATA SHEETS SDS W3194-1 (English) SDS W194-34 (English) SDS W3194-36 (English)  TECHNICAL DATA SHEETS TDS W3194 (English)

Read more less

Fueled by innovative technology, Woodluxe extends the luxurious beauty of your home's interior to the outdoors. Features Solid opacity allows the texture of the wood to show through Reduced cracking and peeling, which means less prep—and easier recoating Provides a UV-and mildew-resistant coating Advanced all-weather protection Easy soap and water cleanup Availability in a wide range of colors Details Available Colors: All 3,500+ Colors Sheen (or Gloss): N/A Cleanup: Soap and Water Resin Type: Proprietary Acrylic Recommended Use: Exterior MPI Rating: VOC Level: 81.6 Data Sheets SDS SDS 694-01 (English) SDS 694-01 (Español) SDS 694-1X (English) SDS 694-1X (Español) SDS 694-2X (English) SDS 694-2X (Español) SDS 694-3X (English) SDS 694-3X (Español) SDS 694-4X (English) SDS 694-4X (Español) TDS TDS 694 (English)

Read more less