Interior Paints Homepage

Fire Retardant Paint expands and forms a thick cellular char blanket, called intumescence, when attacked by flame. This latex paint retards flame spread, minimizes smoke development, and applies like a conventional latex flat paint. Features Slows the spread of fire and smoke Chemical reaction forms intumescence For commercial and residential use Low-VOC Dries to a decorative flat finish Details Available Colors: White Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior Data Sheets SDS SDS FR-210 (English) SDS FR-210 (Español) TDS TDS FR-210 (English)

Read more less

Floor & Patio High Gloss Enamel Easy application – Goes on Smoothly Resistant to soaps and detergents, grease and oil Durable Finish – Resists marring and scratching and delivers lasting finish Low VOC – Environmentally friendly Interior/Exterior Use – Can be used over multiple substrates Engineered with Gennex® Color Technology View the sell sheet for more information Recommended for:Particularly recommended for basements, porches, patios, breezeways, showrooms, and light industrial applications.FEATURES  Available Colors: White 01, Light Gray 70, Deck Gray 71, Platinum Gray 74 Sheen (or Gloss): High Gloss Cleanup: Soap and Water Resin Type: Waterborne Acrylic Urethane Recommended Use: Interior, Exterior MPI Rating: VOC Level: 43.7 Color available: White 01, Light Gray 70, Deck Gray 71, Platinum Gray 74 DATASHEETS SAFETY DATA SHEET: 12101_SDS_EN.pdf 12101_SDS_SP.pdf 1211X_SDS_EN.pdf 1211X_SDS_SP.pdf 1212X_SDS_EN.pdf 1212X_SDS_SP.pdf 1213X_SDS_EN.pdf 1213X_SDS_SP.pdf 1214X_SDS_EN.pdf 1214X_SDS_SP.pdf 12170_SDS_EN.pdf 12170_SDS_SP.pdf 12171_SDS_EN.pdf 12171_SDS_SP.pdf 12174_SDS_EN.pdf 12174_SDS_SP.pdf TECHNICAL DATA SHEET: 0121_TDS_US.pdf OTHER DATA SHEET:

Read more less

Floor & Patio Low Sheen Enamel Easy application – Goes on Smoothly Resistant to soaps and detergents, grease and oil Durable Finish – Resists marring and scratching and delivers lasting finish Low VOC – Environmentally friendly Interior/Exterior Use – Can be used over multiple substrates Engineered with Gennex® Color Technology View the sell sheet for more information Recommended for:Particularly recommended for basements, porches, patios, breezeways, showrooms, and light industrial applications.   FEATURES  Available Colors: White 01, Light Gray 70, Deck Gray 71, Platinum Gray 74 Sheen (or Gloss): Low Sheen Cleanup: Soap and Water Resin Type: Waterborne Acrylic Urethane Recommended Use: Interior, Exterior MPI Rating: 60 VOC Level: 44.0 Color available: White 01, Light Gray 70, Deck Gray 71, Platinum Gray 74 DATASHEETS SAFETY DATA SHEET: N12201_SDS_EN.pdf N12201_SDS_SP.pdf N1221X_SDS_EN.pdf N1221X_SDS_SP.pdf N1222X_SDS_EN.pdf N1222X_SDS_SP.pdf N1223X_SDS_EN.pdf N1223X_SDS_SP.pdf N1224X_SDS_EN.pdf N1224X_SDS_SP.pdf N12270_SDS_EN.pdf N12270_SDS_SP.pdf N12271_SDS_EN.pdf N12271_SDS_SP.pdf N12274_SDS_EN.pdf N12274_SDS_SP.pdf TECHNICAL DATA SHEET: N122_TDS_US.pdf OTHER DATA SHEET:

Read more less

Tread-Tex®Anti-Skid Paint Additive is a fine aggregate material that can be added to any floor paint to provide a skid-resistant surface. When painting, add skid-resistant safety to stairs, decks, docks, and more. Tread-Tex can be used on interior or exterior surfaces where slipping is likely to occur. Interior or Exterior Use 16 oz. bag mixes with one gallon of paint

Read more less

 A premium quality, low lustre, oil based, alkyd paint with superb leveling and hiding qualities. Easy to apply with excellent sag resistance; clings to sharp edges and corners. Covers surfaces in one coat, provided they are in good repaint condition and color change is not extreme.  Features Available Colors: All Colors, Ready Mixed White and BlackSheen (or Gloss): SatinCleanup: SolventResin Type: AlkydRecommended Use: InteriorMPI Rating: 51VOC Level: 375 Details Excellent sag resistance Easy to apply with brush, roller or spray gun Covers surfaces in one coat, provided they are in good repaint condition and color change is not extreme

Read more less

Cassiopeia is clear crushed glass flakes sprayed over a heavy-bodied acrylic base. The Cassiopeia system is composed of Cassio-Base which serves as the bonding agent, and a mixture of clear crushed glass flakes and colored glitters which are sprayed over it. Cassiopeia finish is available in any color and offers an innovative effect which creates an illusion of space, light and colors. This is the second step in the 2 part system. Warning: Use eye protection and breathing apparatus when spraying the Cassiopeia. Keep away from children. Material can be harmful if swallowed. If product causes any type of reaction see a physician immediately. Application: Apply one coat of Cassiopeia Base with a delicate roller and wait until fully cured. Apply a second coat of Cassiopeia Base with a thicker roller. The thickness of that should be 1 kg/m2. When the substance is still wet, spray the Cassiopeia glass flakes and glitter on the wall using a hopper gun until a complete and uniform appearance is obtained (300-400 gr. of flakes / m2). After the wall is dry, go over it with a brush and remove all sharp and flaking pieces. The ratio of Cassiopeia Base and Glass Flakes is 1 to 1.

Read more less

Meoded Concretta FS - Premium Concrete Finish is highly water-resistant and widely used in modern architecture for various structures like shower walls, baths, sinks, countertops, ceilings, and floors, both indoors and outdoors. Crafted from cement and limestone, Concretta is rammed, polished, and sealed for a waterproof surface. It boasts exceptional durability and is easy to apply. Applied as a paste, Concretta features a soft, undulating texture ideal for forming curves and achieving seamless finishes. It can be pigmented to match any color scheme and offers the flexibility of a shiny or matte appearance upon finishing. Meoded Concretta Premium Concrete Finish comes in a base Limestone-Concrete color and can be tinted to almost any color for an extra charge. This plaster is formulated with superb adhesion that allows to apply directly over pre-existing marble/tile with no primer needed. This plaster finish has a seamless, smooth appearance with subtle movement and a luxurious texture. Concretta allows the creation of a variety of different textures giving walls a natural and authentic finish look of concrete. Approx coverage of 12-20sf per 10lb GAL for two coats Working time upon adding water is 45 minutes to 1.5hrs If your project requires less than a bucket for one (1) coat, you prefer to order in single gallon increments. This way you are able to mix in pre-measured, smaller batches. Related Products to purchase: Color Pack(s) will be added at checkout for selected color & size ordered. These should not be removed from the shopping cart. Meoded PlasterGuard must be used to seal SHOWER WALLS Meoded PlasterSeal+ is recommended as a topcoat to PlasterGuard to seal SHOWER FLOORS and Countertop surfaces Meoded Stain Shield can be used as  the sealer outside of the shower area Note: Concretta is shipped dry. It is not pre-mixed to a color because water is added at the time of application. Also, the Color Pack is a plastic jar of water-soluble colorant concentrate and will be found inside the Concretta container. 

Read more less

Meoded Crystal Brush Glitter is a "glitter paint" that provides a contemporary aesthetic, adding a glistening/sparkle effect using fine glitters. It produces a durable, lightly textured decorative finish ideal for living rooms, bedrooms, dining rooms, foyers, theaters, commercial, and retail spaces. The effect is both subtle and bold depending on lighting and the angle. Color matching for Meoded Crystal Brush Glitter to most any color available by request through the online order process.  Lightly textured, decorative glitter finish Low VOC Water based Coverage: Approximately 140 sf/gal and 35 ft/qt Minimum 2 coats recommended Easy application. Should be applied with a high-quality brush or with a roller in small areas and then immediately back brushed for the effect. A flogger brush can be used to soften the second coat while it is drying for a more elegant effect. Proper preparation; make sure the surface is clean, dry, and free of any dirt, grease, or other contaminants that could affect the paint's adhesion; consider using a clear sealer, to prevent chipping, fading, or discoloration Versatile; apply two coats in a crosshatch pattern to produce an organic look and variation of a glittery, metallic effect; try different painting techniques, such as dry-brushing or sponging, to create a unique look Combine with other paints: Crystal Brush Glitter Paint can be used in combination with other paints to create a unique, layered look; can also be used as a topcoat over a base color for a shimmering effect Unique decorative flare; adding a touch of sparkle to walls, furniture, or other objects, makes interior surfaces glisten and sparkle, giving your walls a contemporary look with Crystal Brush Glitter Paint

Read more less

Golmex plaster is a high-quality Portland cement composed of lime and graded silica sand, creating the appearance of polished concrete on interior and exterior walls. Golmex's pre-mixed dry powder substrate is formulated for superb adhesion, workability, and durability. A wide range of interior and exterior textures can be achieved with Golmex; including the natural look of concrete and textured designer wall finishes from the hands of a skilled plasterer. Warning: Avoid extended skin contact. Use eye protection and breathing apparatus when sanding material. Keep room well ventilated when working indoors. Color is natural concrete gray Lime/Marble based Interior or Exterior Coverage: 80-100 SF/5 Gal, 15-20 SF/Gal, & 3-5 SF/Qt Minimum 2 coats recommende Meoded Stain Shield clear sealer is recommended as the finishing step.

Read more less

Marmarino Intonacco is a heavier version of Marmarino Palladino - natural lime and marble dust paste plaster which can be used as an interior and exterior decorative wall finish. Palladino's medium size grain forms a thicker body which allows the creation of authentic textures. These textures enhance the look and feel of any location that needs a warm and dramatic appearance. Intonaco produces a wide range of textures including a contemporary smooth finish with minimal movement, distressed marble-like finish, or various natural stone-looks. Prepare surface with Meoded Quartz Primer Interior or Exterior 4.25g (20kg) size covers approximately 60-140 sq ft for 2 coat application Color Pack(s) will be added at checkout for selected color & size ordered. These should not be removed from the shopping cart. Meoded Stain Shield clear sealer is recommended as the finishing step after 48hrs of dry time.

Read more less

Intonacco Palladino is a heavier version of Marmarino Palladino - natural lime and marble dust paste plaster which can be used as an interior and exterior decorative wall finish. Palladino's medium size grain forms a thicker body which allows the creation of authentic textures. These textures enhance the look and feel of any location that needs a warm and dramatic appearance. Palladino produces a wide range of textures including a contemporary smooth finish with minimal movement, distressed marble-like finish, or various natural stone-looks. Prepare surface with Meoded Quartz Primer Interior or Exterior 4.25g (20kg) size covers approximately 100-180 sq ft for 2 coat application Color Pack(s) will be added at checkout for selected color & size ordered. These should not be removed from the shopping cart. Meoded Stain Shield clear sealer is recommended as the finishing step.  

Read more less

Meoded Marmarino Tintoretto Finish is a natural lime and marble dust paste plaster, which can be used as an interior and exterior flat/low sheen Venetian Plaster. Tintoretto is a contemporary version of traditional smooth stucco which is known for its warmth and dramatic appearance. A wide range of textures can be achieved with Tintoretto™ including marble-like, smooth finish, distressed, or natural stone looks. Due to its natural makeup, Tintoretto allows for the creation of a matte or a slight sheen finish depending upon type of application. First coat should be applied thinly and evenly with stainless trowel as base coat allowing 12hrs to dry. The second coat should be applied tightly in overlapping cross pattern. Pressing or burnishing techniques can be used to achieve up to a low-sheen finish. Allow to dry for 48 hours. Prepare surface with Meoded Quartz Primer One (1) gallon (5kg) covers 40-60sf for 2 coats Four (4) gallon Bucket (20kg) covers 180-220sf for 2 coats Interior or Exterior Low Sheen Finish Color Pack(s) will be added at checkout for selected color & size ordered. These should not be removed from the shopping cart. Meoded Stain Shield clear sealer is recommended as the finishing step after 48hrs of dry time.

Read more less