Wood Stains

Armstrong-Clark Semi-Solid Stain for deck and siding wood stain makes use of conditioning oils that part from the drying oils in the formula. The nondrying oils penetrate into the wood and take the place of the wood’s diminishing natural oils. This process revives and restores wood.Armstrong-Clark Semi-Solid Stain. The drying oils stay on the wood surface and lock in the conditioning oils to produce a barrier that is dry to the touch. Armstrong’s deck and siding wood stain contain vegetable oils in addition to transparent pigments, solvents, mildewcides and water repellents. Application can be done in direct sunlight and on hot days. If the first coat of stain penetrates within 30 minutes an additional coat may be applied for extra protection. Applies easily by roller, brush, or airless sprayer. During spraying – going back over with a brush or roller will help give a more even appearance. After 24 hours any remaining puddles or glossy spots can be removed using a dry rag. Older wood is reconditioned by deep penetrating nondrying oils. Drying oils lock in the conditioning oils while pigments and water repellents lock out moisture and UV damage. Armstrong wood stain is compliant with all environmental standards. Does not contain any offensive odors. Coverage Area Armstrong-Clark Deck and Siding Stain applies at 150-200 sq ft per gallon. Depending on wood porosity, actual coverage will vary. Color Samples We suggest requesting the 4oz sample cans of the colors you are interested to try if you are curious how it will look for your project.  Samples are free with a handling charge.

Read more less

Ultra Spec Exterior Solid Color Stain Quality acrylic latex stain with a rustic flat finish Breathable surface for maximum durability Compatible with Gennex® colourants Excellent hiding and adhesion Specially formulated to resist mildew growth on the stain film Resistant to blistering Soap and water clean up Fade resistant Easy application Engineered with Gennex® Color Technology Recommended for:Application to exterior surfaces such as new or previously painted wood, hardboard, fibre cement, masonry, and unglazed brick. FEATURES   Available Colors: Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Exterior MPI Rating: VOC Level: 43.0 Color available: DATASHEETS SAFETY DATA SHEET: 45001_SDS_EN.pdf 45001_SDS_SP.pdf 4501X_SDS_EN.pdf 4501X_SDS_SP.pdf 4502X_SDS_EN.pdf 4502X_SDS_SP.pdf 4503X_SDS_EN.pdf 4503X_SDS_SP.pdf 4504X_SDS_EN.pdf 4504X_SDS_SP.pdf TECHNICAL DATA SHEET: 450_TDS_US.pdf OTHER DATA SHEET:

Read more less

Premium Polyurethane Wood Finishes are formulated to provide the maximum beauty and protection for kitchen cabinets, doors, trim, furniture, and floors. Excellent Flow & Leveling Spreads Evenly Resists Impact & Abrasion Wear Resistant Excellent Durability Interior Use Oil-Based Coverage 400-500sf depending on surface porosity Allpro brand manufactured by Richards Paint

Read more less

This stain enhances the beauty of bare wood surfaces with intense color. Water-Based Wood Stain is recommended for use on bare, interior wood surfaces or surfaces from which the previous finish has been removed. This stain is a fast drying, semi-transparent wood stain that cleans easily with soap and water. COLORS are made in our store using the Tint Base. Simply order this item in the quart or gallon size, then specify which color desired in the order notes. Certain "Rich" colors  such as Carbon Black, Crimson Fire Vintage Burgundy or others cannot be made in the store. Instead, these are made by Old Masters, and may require additional time to fulfill your order. SANTA FE colors can be made using the water-based Pickling White in quarts or gallon sizes. These colors are shown on the Old Masters website. Contact us with any questions.

Read more less

Armstrong-Clark Stains for deck and siding wood stain makes use of conditioning oils that part from the drying oils in the formula. The nondrying oils penetrate into the wood and take the place of the wood’s diminishing natural oils. Using Armstrong-Clark Stains this process revives and restores wood. The drying oils stay on the wood surface and lock in the conditioning oils to produce a barrier that is dry to the touch. Armstrong’s deck and siding wood stain contain vegetable oils in addition to transparent pigments, solvents, mildewcides and water repellents. Application can be done in direct sunlight and on hot days. If the first coat of stain penetrates within 30 minutes an additional coat may be applied for extra protection. Applies easily by roller, brush, or airless sprayer. During spraying – going back over with a brush or roller will help give a more even appearance. After 24 hours any remaining puddles or glossy spots can be removed using a dry rag. Older wood is reconditioned by deep penetrating nondrying oils. Drying oils lock in the conditioning oils while pigments and water repellents lock out moisture and UV damage. Armstrong wood stain is compliant with all environmental standards. Does not contain any offensive odors. Coverage Area Armstrong-Clark Deck and Siding Stain applies at 150-200 sq ft per gallon. Depending on wood porosity, actual coverage will vary. Color Samples We suggest requesting the 4oz sample cans of the colors you are interested to try if you are curious how it will look for your project.  Samples are free with a handling charge.

Read more less

Armstrong-Clark’s deck and siding wood stain makes use of conditioning oils that part from the drying oils in the formula. The nondrying oils penetrate into the wood and take the place of the wood’s diminishing natural oils. This process revives and restores wood. The drying oils stay on the wood surface and lock in the conditioning oils to produce a barrier that is dry to the touch. Armstrong’s deck and siding wood stain contain vegetable oils in addition to transparent pigments, solvents, mildewcides and water repellents. Application can be done in direct sunlight and on hot days. If the first coat of stain penetrates within 30 minutes an additional coat may be applied for extra protection. Applies easily by roller, brush, or airless sprayer. During spraying – going back over with a brush or roller will help give a more even appearance. After 24 hours any remaining puddles or glossy spots can be removed using a dry rag. Older wood is reconditioned by deep penetrating nondrying oils. Drying oils lock in the conditioning oils while pigments and water repellents lock out moisture and UV damage. Armstrong wood stain is compliant with all environmental standards. Does not contain any offensive odors. Coverage Area Armstrong-Clark Deck and Siding Stain applies at 150-200 sq ft per gallon. Depending on wood porosity, actual coverage will vary. Color Samples We suggest requesting the 4oz sample cans of the colors you are interested to try if you are curious how it will look for your project.  Samples are free with a handling charge.

Read more less

Sikkens Cetol Door & Window is a premium translucent exterior stain with an alkyd high solids formulation that offers optimum protection and a distinctive look for these unique areas. Available as a clear satin, clear gloss or 4 ready mix colors in satin.  For a greater selection of colors, Sikkens Cetol 1 may be used as a base coat.

Read more less

Armstrong-Clark’s deck and siding wood stain makes use of conditioning oils that part from the drying oils in the formula. The nondrying oils penetrate into the wood and take the place of the wood’s diminishing natural oils. This process revives and restores wood. The drying oils stay on the wood surface and lock in the conditioning oils to produce a barrier that is dry to the touch. Armstrong’s deck and siding wood stain contain vegetable oils in addition to transparent pigments, solvents, mildewcides and water repellents. Application can be done in direct sunlight and on hot days. If the first coat of stain penetrates within 30 minutes an additional coat may be applied for extra protection. Applies easily by roller, brush, or airless sprayer. During spraying – going back over with a brush or roller will help give a more even appearance. After 24 hours any remaining puddles or glossy spots can be removed using a dry rag. Older wood is reconditioned by deep penetrating nondrying oils. Drying oils lock in the conditioning oils while pigments and water repellents lock out moisture and UV damage. Armstrong wood stain is compliant with all environmental standards. Does not contain any offensive odors. Coverage Area Armstrong-Clark Deck and Siding Stain applies at 150-200 sq ft per gallon. Depending on wood porosity, actual coverage will vary. Color Samples We suggest requesting the 4oz sample cans of the colors you are interested to try if you are curious how it will look for your project.  Samples are free with a handling charge.

Read more less

Old Masters Gel Stain is a highly pigmented, oil-based stain designed to achieve intense colors on interior wood, fiberglass, primed metal, and composition surfaces. You can use Gel Stain on the exterior side of entry and garage doors with the use of a protective exterior clear finish.  Its thick formula allows easy application and superior color control, necessary to achieve a rich and uniform color on most surfaces in a single application.  Gel Stain is especially recommended for woods such as pine, birch, maple, poplar, and cherry. Gel Stain is excellent for vertical surfaces. All colors are ready-made by Old Masters. Larger sizes are available, but may require additional time to fulfill your order. Contact us with any questions.

Read more less

Designed for craftsmen, this fast drying, high quality interior oil-based stain applies easily and enhances the wood’s natural grain with its intensified depth of color and clarity. Interior use Colorant based for best uniformity of application Preferred for hardwoods, such as oak, ash, walnut, and mahogany Recommended for use on interior wood surfaces or surfaces on which the previous finish has been removed Colors are ready-made by Old Masters.  We are also able to mix gallons of most colors in our store using the Natural Tint Base - Gallon. Simply order this item and specify in the order notes which color desired. Certain "Rich" colors  such as Carbon Black, Crimson Fire, Vintage Burgundy or others cannot be made in the store due to the nature of color richness. Instead, these gallon sizes are only made by Old Masters, and may require additional time to fulfill your order. SANTA FE colors can be made using the Pickling White stain in quarts or gallon sizes. These colors are shown on the Old Masters website. Contact us with any questions.

Read more less

This is a pre-stain, low-VOC, clear wood sealer that enables uniform stain application on soft woods, such as fir, pine, or hemlock. Using this product helps to avoid the appearance of uneven, blotchy staining.

Read more less

This is a cutting edge, robust, interior oil-based stain. Its thick, rich formula allows for easy application and superior color control, which is necessary to achieve a rich and uniform color on most surfaces in a single application. Interior Colorant based for best uniformity of application Use on a variety of surfaces, including unfinished wood, previously finished surfaces, fiberglass, metal, and composition surfaces Recommended for woods such as pine, birch, maple, poplar, and cherry Colors are ready-made by Old Masters.  We are also able to mix gallons of most colors in our store using the Natural Tint Base - Gallon. Simply order this item and specify in the order notes which color desired. Certain "Rich" colors  such as Carbon Black, Crimson Fire Vintage Burgundy or others cannot be made in the store due to the nature of color richness. Instead, these gallon sizes are only made by Old Masters, and may require additional time to fulfill your order. SANTA FE colors can be made using the Pickling White stain in quarts or gallon sizes. These colors are shown on the Old Masters website. Contact us with any questions.

Read more less