Exterior Paints

Ultra Spec Masonry Int/Ext 100% Acrylic Sealer Designed to penetrate and seal the surface of new or previously painted masonry surfaces providing the proper foundation for subsequent finish coats. It can be applied to masonry with pH levels as high as 13. Reduces the porosity of masonry surfaces Provides excellent surface adhesion Tintable High Alkali Resistance - pH 13 Engineered with Gennex® Color Technology Recommended for:For application to new or previously painted masonry surfaces including; tilt-up concrete construction, stucco surfaces and block construction. FEATURES   Available Colors: Clear, White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Exterior MPI Rating: 3 VOC Level: 46.0 Color available: Clear, White DATASHEETS SAFETY DATA SHEET: 60800_SDS_EN.pdf 60800_SDS_SP.pdf 60801_SDS_EN.pdf 60801_SDS_SP.pdf TECHNICAL DATA SHEET: 608_TDS_US.pdf

Read more less

Benjamin Moore Paint Extender for Latex Paints—a professional-grade solution designed to elevate your painting experience. This innovative waterborne conditioner enhances the performance of latex paints, delivering flawless results for both DIY enthusiasts and seasoned pros. Benjamin Moore Paint Extender is formulated to extend the open time of your paint, it ensures smoother application, even in challenging conditions like high heat or low humidity. Say goodbye to lap marks and brush strokes as this extender improves flow and leveling, leaving a seamless, polished finish on every project. Paint Extender Specially formulated to enhance the application properties of our premium products without adverse effects on dry film properties Proprietary 100% acrylic Very low VOC For interior and exterior use FEATURES Available Colors: Clear Sheen (or Gloss): N/A Cleanup: Soap and Water Resin Type: Proprietary Acrylic Latex Recommended Use: Interior, Exterior MPI Rating: VOC Level: 6.0 Color available: Clear DATASHEETS SAFETY DATA SHEET: 51800_SDS_EN.pdf 51800_SDS_SP.pdf TECHNICAL DATA SHEET: 518_TDS_US.pdf OTHER DATA SHEET:

Read more less

Urethane Alkyd Gloss Good color and gloss retention 2 hours dry to touch(@ 77° F) Good abrasion resistance Standard line of colors Unlimited custom tintedcolors Interior or exterior application Rust Preventative Coating FEATURES Available Colors: All Colors, an assortment of Ready Mixed Colors Sheen (or Gloss): Gloss Cleanup: Solvent Resin Type: Urethane-Alkyd Recommended Use: Interior, Exterior MPI Rating: 9, 48 VOC Level: 394.0 Color available: All Colors, an assortment of Ready Mixed Colors DATASHEETS SAFETY DATA SHEET: P2208_SDS_EN.pdf P2208_SDS_SP.pdf P2215_SDS_EN.pdf P2215_SDS_SP.pdf P221B_SDS_EN.pdf P221B_SDS_SP.pdf P2221_SDS_EN.pdf P2221_SDS_SP.pdf P222B_SDS_EN.pdf P222B_SDS_SP.pdf P2235_SDS_EN.pdf P2235_SDS_SP.pdf P223B_SDS_EN.pdf P223B_SDS_SP.pdf P224B_SDS_EN.pdf P224B_SDS_SP.pdf P2260_SDS_EN.pdf P2260_SDS_SP.pdf P2264_SDS_EN.pdf P2264_SDS_SP.pdf P2265_SDS_EN.pdf P2265_SDS_SP.pdf P2273_SDS_EN.pdf P2273_SDS_SP.pdf P2275_SDS_EN.pdf P2275_SDS_SP.pdf P2278_SDS_EN.pdf P2278_SDS_SP.pdf P2282_SDS_EN.pdf P2282_SDS_SP.pdf TECHNICAL DATA SHEET: CP22_TDS_US.pdf P22_TDS_US.pdf OTHER DATA SHEET:

Read more less

TuffCrete® Solvent Acrylic Concrete Waterproofing Stain is a solvent-borne acrylic concrete stain designed for deep penetration into concrete surfaces. With excellent adhesion, this product delivers outstanding durability in a low-sheen finish that helps to hide surface defects. It can be applied in one coat as a stain, or in two coats for an opaque finish. Select one of the "ready-made" colors or specify another color choice in the  order notes - we are able to make many colors in this product using the neutral base. Excellent adhesion Durable low-sheen finish Color fade resistance Quick-drying Deep concrete penetration Superior wear resistance Use on Concrete, Brick or Stucco walls & walkways Coverage approx 300-500sf Sell Sheet & Color Chart Details Available Colors: White, Gray Pearl, Light Gray, Tile Red, Terracotta, Desert Sand, Saddle Brown, Neutral Base, Clear (High Gloss) Sheen (or Gloss): Low Sheen Cleanup: Solvent Resin Type: Acrylic Recommended Use: Interior, Exterior Data Sheets SDS SDS CST-5100 (English) SDS CST-5100 (Español) SDS CST-5110 (English) SDS CST-5110 (Español) SDS CST-5190 (English) SDS CST-5190 (Español) SDS CST-5308 (English) SDS CST-5308 (Español) SDS CST-5310 (English) SDS CST-5310 (Español) SDS CST-5505 (English) SDS CST-5505 (Español) SDS CST-5509 (English) SDS CST-5509 (Español) SDS CST-5789 (English) SDS CST-5789 (Español) SDS CST-5922 (English) SDS CST-5922 (Español) SDS CST-5998 (English) SDS CST-5998 (Español)

Read more less

TuffCrete® Waterborne Acrylic Concrete Stain is a water-reduced acrylic concrete coating designed for application to interior or exterior masonry surfaces. It can be applied in one coat as a stain, or in two coats for an opaque finish. Select one of the "ready-made" colors or specify another color choice in the  order notes - we are able to make many colors in this product using a mixing base. Waterborne acrylic formula Color fade resistance Fast-drying Rugged, durable finish Resists detergents, oils, grease, and scrubbing For interior or exterior masonry surfaces Use on Concrete, Brick or Stucco walls & walkways Coverage approx 300-500sf Details Available Colors: Tintable White, Gray Pearl, Light Gray, Tile Red, Desert Sand, Saddle Brown, Deep Base, Neutral Base, Clear (High Gloss) Sheen (or Gloss): Low Sheen Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior Sell Sheet & Color Chart Data Sheets SDS CCST-2110 (English) SDS CCST-2110 (Español) SDS CCST-2112 (English) SDS CCST-2112 (Español) SDS CCST-2190 (English) SDS CCST-2190 (Español) SDS CCST-2308 (English) SDS CCST-2308 (Español) SDS CCST-2310 (English) SDS CCST-2310 (Español) SDS CCST-2505 (English) SDS CCST-2505 (Español) SDS CCST-2922 (English) SDS CCST-2922 (Español) SDS CCST-2998 (English) SDS CCST-2998 (Español) SDS CST-2100 (English) SDS CST-2100 (Español) SDS CST-2110 (English) SDS CST-2110 (Español) SDS CST-2112 (English) SDS CST-2112 (Español) SDS CST-2190 (English) SDS CST-2190 (Español) SDS CST-2308 (English) SDS CST-2308 (Español) SDS CST-2310 (English) SDS CST-2310 (Español) SDS CST-2505 (English) SDS CST-2505 (Español) SDS CST-2789 (English) SDS CST-2789 (Español) SDS CST-2922 (English) SDS CST-2922 (Español) SDS CST-2998 (English) SDS CST-2998 (Español)

Read more less

Alkyd Zone Marking Paint is a fast-drying, exterior/interior zone marking paint designed for use on concrete and asphalt surfaces. It resists abrasion, oils, grease, gasoline, and severe weather. Features Alkyd zone marking paint Designed for use on concrete or asphalt Resists abrasion, oils, grease, gasoline, and severe weather Details Available Colors: White Sheen (or Gloss): Flat Cleanup: Solvent Resin Type: Alkyd Recommended Use: Exterior Data Sheets SDS SDS TP-2410 (English) SDS TP-2410 (Español) SDS TP-2424 (English) SDS TP-2424 (Español) TDS TDS TP-3424_TP-2410 (English)

Read more less

Aqua Lock® Plus is a multi-purpose, 100% acrylic, water-based primer sealer for outstanding everyday stain blocking on a variety of surfaces. It adheres to interior and exterior surfaces and can be top coated with latex or oil-based coatings. Features 100% acrylic Blocks tough stains Provides a mold-resistant coating, including in high-humidity areas Quick-drying Top coat in 1 hour Details Available Colors: White, Black, Deep Base Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior Data Sheets SDS SDS AQ-0400 (English) SDS AQ-0400 (Español) SDS AQ-0420 (English) SDS AQ-0420 (Español) SDS AQ-0577 (English) SDS AQ-0577 (Español) TDS TDS AQ-0XXX (English)

Read more less

Chlorinated Rubber Swimming Pool Paint is a chlorinated rubber coating for new or old in-ground masonry pools. It provides excellent chemical resistance and is durable in fresh or salt water, and also acceptable for use in chlorinated pools. Use Chlorinated Rubber Swimming Pool Paint over existing chlorinated rubber based pool paint or over bare concrete, marcite, gunite, or other masonry surfaces in good condition. Features Chlorinated rubber system For use on new or old in-ground masonry pools For use in fresh, salt water, or chlorinated pools Details Available Colors: White, Aquamarine, Ocean Blue, Royal Blue, Red, Black Sheen (or Gloss): Semi-Gloss Cleanup: Solvent Resin Type: Chlorinated Rubber Recommended Use: Interior, Exterior Data Sheets SDS SDS CR-2602 (English) SDS CR-2602 (Español) SDS CR-2610 (English) SDS CR-2610 (Español) SDS CR-2619 (English) SDS CR-2619 (Español) SDS CR-2620 (English) SDS CR-2620 (Español) SDS CR-2623 (English) SDS CR-2623 (Español) SDS CR-2624 (English) SDS CR-2624 (Español) TDS TDS CR-26XX (English) ODS Painting Guide - CR-2600 (English) Painting Guide - CR-2600 (Español) Pool Paint FAQs (English) Pool Paint Solvent Tests (English) Swimming Pool Paint - Color Selection (English) Swimming Pool Paint - Color Selection (Español)

Read more less

Features Block Out® Exterior Tannin Blocking Primer is designed for use as a multi-purpose latex exterior whole-house primer. Block Out® excels at priming exterior wood and is formulated for use on metal and masonry surfaces, siding or most exterior substrates. Its latex formula blocks tannin stains on all new and weathered wood surfaces and can be top coated with latex or alkyd finish coats. Acrylic latex Exceptional tannin-blocking power Formulated for exterior wood, metal, and masonry Can be used on new or weathered wood Top coat with latex or alkyd paints Details Available Colors: White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Exterior Data Sheets SDS SDS TB-2100 (English) SDS TB-2100 (Español) TDS TDS TB-2100 (English)

Read more less

Waterborne Swimming Pool Paint can be applied to slightly damp surfaces, dries quickly for recoating, and withstands continuous submersion in fresh or salt water. Use Waterborne Swimming Pool Paint over most types of properly prepared existing pool paints, as well as bare concrete or plaster, marcite, gunite, and other masonry surfaces in sound condition. Features Acrylic emulsion pool paint Can be applied over most types of properly prepared existing pool paints Ideal for bare concrete, marcite, gunite, and other masonry Long-lasting color and protection Quick-drying Details Available Colors: White, Aquamarine, Ocean Blue, Royal Blue, Red, Black Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior Data Sheets SDS SDS WR-1002 (English) SDS WR-1002 (Español) SDS WR-1010 (English) SDS WR-1010 (Español) SDS WR-1019 (English) SDS WR-1019 (Español) SDS WR-1020 (English) SDS WR-1020 (Español) SDS WR-1023 (English) SDS WR-1023 (Español) SDS WR-1024 (English) SDS WR-1024 (Español) TDS TDS WR-1XXX (English) ODS Painting Guide - WR-10XX (English) Painting Guide - WR-10XX (Español) Pool Paint FAQs (English) Pool Paint Solvent Tests (English) Swimming Pool Paint - Color Selection (English) Swimming Pool Paint - Color Selection (Español)

Read more less

Stix® Waterborne Bonding Primer is a pemium-quality, acrylic-urethane primer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals. A professional favorite, Stix® Waterborne Bonding Primer offers unparalleled adhesion to the most challenging surfaces like glossy tile, PVC, vinyl, plastic, galvanized metals and much more. Stix® is also ideal for plaster, drywall, and wood substrates where a low ambient or surface temperature would hinder conventional primers. Premium-quality, acrylic-urethane primer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals. Tack free in 30 minutes and can re-coat in 3-4 Hours. Coverage is 300 To 400 sq. ft. per gallon. Features Bonds to hard-to-coat surfaces Cures in temperatures as low as 35°F Creates an extremely hard film Excellent enamel holdout Can be top coated with almost any product Excellent enamel holdout Smooth leveling Soap and water cleanup nterior or exterior use Recoat in 3-4 hours Low temperature application as low as 35°F (1.7°C) Details Available Colors: White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: Acrylic Urethane Recommended Use: Interior, Exterior Data Sheets SDS SDS SXA-1100 (English) SDS SXA-1100 (Español) TDS TDS SXA-110 (English)

Read more less

A premium exterior alkyd primer ideal for tannin-rich woods, offering outstanding stain suppression and excellent penetration for maximum adhesion and a long-lasting finish, even on weathered and chalky surfaces. Features For use on new or previously coated exterior wood Penetrates wood surfaces for maximum adhesion and a longer lasting finish Excellent stain suppressor Seals uniformly Details Available Colors: White, Deep Base Sheen (or Gloss): Primer Cleanup: Solvent Resin Type: Alkyd Recommended Use: Exterior Data Sheets SDS SDS 094-00 (English) SDS 094-00 (Español) TDS TDS 094 (English)

Read more less