Exterior Paint

Epoxy Pool Paint is a high solids, two-component polyamide epoxy coating that offers excellent chemical and abrasion resistance. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. Use Epoxy Pool Paint over previous epoxy coatings, steel, fiberglass, bare concrete, marcite, gunite, or other masonry surfaces in sound condition. Two-component polyamide epoxy pool paint For use on concrete, marcite, gunite, fiberglass, and steel pools Can also be used over existing epoxy coatings Extremely durable Resistant to common pool chemicals, including chlorine

Read more less

Epoxy Pool Paint is a high solids, two-component polyamide epoxy coating that offers excellent chemical and abrasion resistance. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. Use Epoxy Pool Paint over previous epoxy coatings, steel, fiberglass, bare concrete, marcite, gunite, or other masonry surfaces in sound condition. Two-component polyamide epoxy pool paint For use on concrete, marcite, gunite, fiberglass, and steel pools Can also be used over existing epoxy coatings Extremely durable Resistant to common pool chemicals, including chlorine

Read more less

A new generation of waterborne, acrylic emulsion pool paints which can be applied over most types of pool coatings in good condition, as well as bare concrete or plaster surfaces. WR-1000 series pool paint can be applied to slightly damp surfaces, dries quickly for recoating and withstands continuous submersion in fresh and salt water. Ready to use Long-lasting color and protection Use with fresh or salt water   Specifications Brand Name:Insl-X Product Type: Swimming Pool Paint Brand Name: Insl-X Coating Material: Acrylic Color: White Container Size: 1 gallon (US) Coverage Area: 300 - 400 square foot Sheen: Semi-Gloss Time Before Recoating: 6 hour VOC Level: 289 grams per liter Clean Up: Soap and Water Indoor or Outdoor: Indoor and Outdoor Full Cure Time: 14 day Recommended Surface: Concrete, Marcite and Gunite Click here to see the Safety Data Sheets for this product.

Read more less

Stix waterborne bonding primer is a premium quality, waterborne, acrylic urethane primer/sealer with unparalleled adhesion to the most challenging surfaces, Stix is also ideal for use on plaster, drywall, wood and non-ferrous metals, where a low ambient or surface temperature would present a problem for conventional primers. Offers an extremely hard film when cured. Use it on interior and exterior surfaces and topcoat with almost any type of coating including alkyd, acrylic latex, urethane, epoxy and lacquer finishes. Stix levels to a smooth surface and cleans up with soap and water. Strongly bonds to glossy surfaces Unparalleled adhesion to the most challenging surfaces Excellent holdout   Specifications Brand Name:Insl-X Sub Brand: Stix Product Type: Bonding Primer Base Type: Water-Based Brand Name: Insl-X Coating Material: Acrylic Urethane Color: White Container Size: 1 gallon (US) Coverage Area: 300-400 square foot Sheen: Flat Sub Brand: Stix Time Before Recoating: 4 hour Tintable: Yes VOC Level: 100 grams per liter Clean Up: Soap and Water Indoor or Outdoor: Indoor and Outdoor Odor Level: Low Odor Full Cure Time: 4 day Recommended Surface: Multiple Surfaces Click here to see the Safety Data Sheets for this product.

Read more less

Alkyd Zone Marking Paint is a fast-drying, exterior/interior zone marking paint designed for use on concrete and asphalt surfaces. It resists abrasion, oils, grease, gasoline, and severe weather. Alkyd zone marking paint Designed for use on concrete or asphalt Resists abrasion, oils, grease, gasoline, and severe weather

Read more less

TuffCrete® WB Acrylic Waterproofing Concrete Stain is a water reduced coating designed for interior or exterior masonry surfaces. It may be applied in one coat as a stain, or in two coats as an opaque finish. An ideal choice for either vertical or horizontal masonry surfaces. This product is available in clear, white, ready mixed colors, and a full range of tinting bases. Not for immersion service.  Waterborne acrylic formula Non Fading Fast Drying Rugged, durable finish Resists detergents, oils, grease &scrubbing For interior or exterior masonry surfaces Coverage: 400-500sq.ft. per gallon Dry Times:  Tack Free: 30 minutes Recoat: 4 hours Light Foot Traffic: 24 hours Heavy Fott Traffic: 72 hours  Recommended For: TuffCrete 100% Acrylic WB Concrete Stain forms a tough, durable film on most interior or exterior masonry surfaces. It may be applied to concrete walls, balconies, patios, pool decks, basement floors, or concrete columns. Apply one coat for a stain look and two coats as an opaque finish. Limitations: Do not apply in direct sunlight or on hot surfaces. Do not apply if the surface or ambient temperature is below 50 °F (10 °C) or more than 90 °F (32.2 °C). NOT RECOMMENDED for driveways, garage floors, heavy industrial floor applications, exterior wood surfaces or for other surfaces that will be exposed to vehicular traffic. Available Sheens: Satin Available Colors: Clear, White, Gray Pearl, Light Gray, Tile Red, Pine Green, Desert Sand, Saddle Brown, and custom colors. Cleanup: Soap and water Resin Type: Acrylic Recommended Use: Interior or exterior MPI Rating: 58, 99 VOC Level: 94 Grams/Liter or .78 Lbs./Gallon  SURFACE PREPARATION: Uncoated Concrete - All cured and uncoated concrete must be at least 30 days old, clean, dry and free of oil, grease, dirt, laitance or other foreign matter that could interfere with penetration or adhesion. Grease, oil, release agents and dirt can be removed by scrubbing the surface with a heavy duty oil and grease emulsifier. Rinse well with clean water. Bare concrete must be porous. Most horizontal concrete requires acid etching with a concrete etching product. Follow all label instructions carefully. A properly etched surface should have a texture like medium/fine sandpaper. NOTE: Extremely smooth or dense pre-cast panels should be aggregate blasted or acid etched prior to application of the stain in order to assure adequate penetration and adhesion. Previously Coated Concrete - Remove all oil, grease, dirt, loose paint or other foreign matter. Scrub the surface with a heavy duty oil and grease emulsifier. Rinse well with clean water and allow it to dry thoroughly. Glossy surfaces must be sanded to remove all gloss. A test area to insure applicability is recommended. Acid etching of painted or sealed surfaces is neither required nor recommended. Coating Preparation- Be sure coating is mixed thoroughly prior to application. If more than one batch number is being used, it is a good idea to intermix gallons in a larger container to assure color uniformity. APPLICATION:  TuffCrete® 100% Acrylic WB Concrete Stain may be applied by nylon brush, short nap roller, airless, HVLP or conventional spray. Apply material in a uniform, even coat at up to 550 square feet per gallon. Actual spread rate is determined by surface texture and application technique. Always attempt to coat large surface areas by painting up to natural breaks or in defined sections in order to reduce the potential for lap marks. For horizontal applications, allow to dry a full minimum of 24 hours before light foot traffic and a minimum of 72 hours before heavier foot traffic. Periods of high humidity, low temperatures or applying a heavy coat will extend the dry time. Do not apply in direct sunlight. Do not apply if ambient or surface temperature is greater than 90 °F or less than 50 °F.

Read more less

TuffCrete® Acrylic Epoxy Bonding Primer is a specially engineered acrylic-epoxy sealer for masonry floors, designed to lock down latent residue on masonry surfaces and provide enhanced adhesion and bonding of finish coats. Ideal for application to garage floors and weathered exterior masonry walkways and patio surfaces. Clear sealer formulated to penetrate and bond to concrete Improves top coat adhesion Locks down latent residue   Available Colors: Clear Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: Acrylic Epoxy Recommended Use: Interior, Exterior MPI Rating: VOC Level: 95.5

Read more less

WaterBlock Acrylic Masonry Waterproofer is designed to waterproof interior or exterior masonry surfaces. WaterBlock is great for basement walls, foundations, retaining walls, exterior masonry walls, and more. WaterBlock is applied directly to bare masonry surfaces. This product is not meant for floors. It is alkali resistant and provides positive sealing and waterproofing over bare concrete block, brick, stucco or tilt up concrete walls. No pre-mixing or surface pre-wetting is necessary with this product. This product contains an agent that inhibits the growth of mildew on the surface of the paint film. Features: Water based Dries fast High alkali resistance - up to pH-13 Suitable for Stucco, Brick, Cinder and Concrete Block Keeps basement walls dry Can be applied to wet walls Coverage: 75-100 sq. feet per gallon Sheen (gloss): Flat

Read more less

MULTAPPLY™ Waterborne Acrylic Gloss Enamel is an interior/exterior finish, which is suitable for coating primed metal, wood, or masonry surfaces. The acrylic resin provides excellent color and gloss retention as well as tenacious adhesion properties. Feature Easy to use Multi-substrate Interior/Exterior Durable Waterborne acrylic formula More Information Available Colors: White (Tintable), Black, Battleship Gray, Safety Red, Safety Yellow, Silver Gray. Tint Bases available for all colors. Sheen (or Gloss): Gloss Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior MPI Rating: 114, 154 VOC Level: 96.0  SAFETY DATA SHEETS SDS 1180-1 (English) SDS 1180-109 (English) SDS 1180-136 (English) SDS 1180-151 (English) SDS 1180-2 (English) SDS 1180-201 (English) SDS 1180-33 (English) SDS 1180-36 (English)  TECHNICAL DATA SHEETS TDS 1180 (English)

Read more less

MULTAPPLY™ Waterborne Acrylic Semi-Gloss Enamel is an interior/exterior finish, which is suitable for coating primed metal, wood, or masonry surfaces. The acrylic resin provides excellent color and gloss retention as well as tenacious adhesion properties. Feature Easy to use Multi-substrate Interior/Exterior Durable Waterborne acrylic formula More Information Available Colors: White (Tintable), Black. Tint Bases available for all colors. Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior MPI Rating: 153 VOC Level: 97.0  SAFETY DATA SHEETS SDS 1190-1 (English) SDS 1190-2 (English) SDS 1190-33 (English) SDS 1190-36 (English)  TECHNICAL DATA SHEETS TDS 1190 (English)

Read more less