Exterior Paint

9 products


  • Aqua Lock® Plus Primer/Sealer

    Benjamin Moore Aqua Lock® Plus Primer/Sealer

    Aqua Lock® Plus is a multi-purpose, 100% acrylic, water-based primer sealer for outstanding everyday stain blocking on a variety of surfaces. It adheres to interior and exterior surfaces and can be top coated with latex or oil-based coatings. Features 100% acrylic Blocks tough stains Provides a mold-resistant coating, including in high-humidity areas Quick-drying Top coat in 1 hour Details Available Colors: White, Black, Deep Base Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior Data Sheets SDS SDS AQ-0400 (English) SDS AQ-0400 (Español) SDS AQ-0420 (English) SDS AQ-0420 (Español) SDS AQ-0577 (English) SDS AQ-0577 (Español) TDS TDS AQ-0XXX (English)

    $20.99$15.99

  • Chlorinated Rubber Swimming Pool Paint

    Benjamin Moore Chlorinated Rubber Swimming Pool Paint

    Chlorinated Rubber Swimming Pool Paint is a chlorinated rubber coating for new or old in-ground masonry pools. It provides excellent chemical resistance and is durable in fresh or salt water, and also acceptable for use in chlorinated pools. Use Chlorinated Rubber Swimming Pool Paint over existing chlorinated rubber based pool paint or over bare concrete, marcite, gunite, or other masonry surfaces in good condition. Features Chlorinated rubber system For use on new or old in-ground masonry pools For use in fresh, salt water, or chlorinated pools Details Available Colors: White, Aquamarine, Ocean Blue, Royal Blue, Red, Black Sheen (or Gloss): Semi-Gloss Cleanup: Solvent Resin Type: Chlorinated Rubber Recommended Use: Interior, Exterior Data Sheets SDS SDS CR-2602 (English) SDS CR-2602 (Español) SDS CR-2610 (English) SDS CR-2610 (Español) SDS CR-2619 (English) SDS CR-2619 (Español) SDS CR-2620 (English) SDS CR-2620 (Español) SDS CR-2623 (English) SDS CR-2623 (Español) SDS CR-2624 (English) SDS CR-2624 (Español) TDS TDS CR-26XX (English) ODS Painting Guide - CR-2600 (English) Painting Guide - CR-2600 (Español) Pool Paint FAQs (English) Pool Paint Solvent Tests (English) Swimming Pool Paint - Color Selection (English) Swimming Pool Paint - Color Selection (Español)

  • Insl-X Garage Guard

    Benjamin Moore Insl-X Garage Guard

    GarageGuard® Water Based 2 Part Epoxy is a new generation water- based catalyzed epoxy which offers performance equal to traditional solvent based epoxy systems. It provides superior chemical, abrasion and impact resistance when compared to conventional waterborne epoxies. The highly cross-linked film provides years of service. GarageGuard® Water Based 2 Part Epoxy produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling. This product is suitable for use in USDA inspected facilities. This is a two component product with a mix ratio of 3:1. It requires 3 parts of the proper “A” or Base Component (underfilled gallon can) mixed with 1 part of the proper “B” or Converter Component (quart). Mixing of Partial Kits Is Not Recommended.  Waterborne 2-part epoxy Durable semi-gloss finish, abrasion & impact resistant  Will not lift existing coatings Resists hot tire pick-up from cars Resists most automobile fluids Recoat in 8 hours; park vehicles in 3 days For Garage Floors, Basement Floors and Other Concrete Surfaces Coverage: 250-300sq.ft. per gallon Dry Times:  Tack Free: 2 hours Recoat: 8 hours Foot Traffic: 24 hours Vehicular Traffic: 72 hours Recommended For: GarageGuard Waterborne Epoxy is designed for use on basement floors, garage floors and other concrete surfaces. Ideal for use in food and beverage processing, transportation, warehouses, industrial refurbishment, healthcare, schools, large commercial structures, industrial and commercial flooring, and other areas where a performance epoxy is needed.    Limitations: Do not apply when air, surface or product temperature is below 50 °F Use the entire gallon of GarageGuard® within 4 hours of initial mixing. Mixing of Partial Kits Is Not Recommended. Not recommended for use in immersion service or acidic exposures. Cleanup: Water Resin Type: Amine Adduct Epoxy Recommended Use: Interior Sheen: Semi-gloss Available Colors: Showroom Gray, Desert Sand, Custom Colors MPI Rating: N/A VOC Level: < 250 g/L

    $145.99$133.99

  • INSL-X Stix Acr Bond

    Benjamin Moore INSL-X Stix Acr Bond

    Stix waterborne bonding primer is a premium quality, waterborne, acrylic urethane primer/sealer with unparalleled adhesion to the most challenging surfaces, Stix is also ideal for use on plaster, drywall, wood and non-ferrous metals, where a low ambient or surface temperature would present a problem for conventional primers. Offers an extremely hard film when cured. Use it on interior and exterior surfaces and topcoat with almost any type of coating including alkyd, acrylic latex, urethane, epoxy and lacquer finishes. Stix levels to a smooth surface and cleans up with soap and water. Strongly bonds to glossy surfaces Unparalleled adhesion to the most challenging surfaces Excellent holdout   Specifications Brand Name:Insl-X Sub Brand: Stix Product Type: Bonding Primer Base Type: Water-Based Brand Name: Insl-X Coating Material: Acrylic Urethane Color: White Container Size: 1 gallon (US) Coverage Area: 300-400 square foot Sheen: Flat Sub Brand: Stix Time Before Recoating: 4 hour Tintable: Yes VOC Level: 100 grams per liter Clean Up: Soap and Water Indoor or Outdoor: Indoor and Outdoor Odor Level: Low Odor Full Cure Time: 4 day Recommended Surface: Multiple Surfaces Click here to see the Safety Data Sheets for this product.

  • INSL-X Waterlock

    Benjamin Moore INSL-X Waterlock

    WaterBlock Acrylic Masonry Waterproofer is designed to waterproof interior or exterior masonry surfaces. WaterBlock is great for basement walls, foundations, retaining walls, exterior masonry walls, and more. WaterBlock is applied directly to bare masonry surfaces. This product is not meant for floors. It is alkali resistant and provides positive sealing and waterproofing over bare concrete block, brick, stucco or tilt up concrete walls. No pre-mixing or surface pre-wetting is necessary with this product. This product contains an agent that inhibits the growth of mildew on the surface of the paint film. Features: Water based Dries fast High alkali resistance - up to pH-13 Suitable for Stucco, Brick, Cinder and Concrete Block Keeps basement walls dry Can be applied to wet walls Coverage: 75-100 sq. feet per gallon Sheen (gloss): Flat

    $214.99

  • Meoded Pearlas Velvet

    Meoded Meoded Pearlas Velvet

    Pearlas Velvet is a Low VOC decorative metallic faux finishing product that produces a look of soft suede metallic Venetian Plaster. Velvet is the ideal wall treatment for formal living and dining rooms, upscale boutiques, posh hotel lobbies, and other spaces where refined style and beauty is desired. With fine metallic powders, its tremendous depth of color allows Velvet to exhibit two or more colors when reflected in various lights. Suede Finish Satin Sheen Low VOC Water based Coverage: 240 SF/Gal and 60 ft/qt Minimum 2 coats recommended Application: Primer should be used before first coat of Pearlas; new drywall should receive PVA type & oil-based primer over previous oil-type paints or stains Apply first coat with trowel and allow to dry at least one (1) hour before applying second coat. Apply material in small amounts with the trowel with varied movements, and then use a clean trowel to achieve desired movement throughout finish.

    $72.99$58.99

  • Meoded Quartz Primer

    Meoded Meoded Quartz Primer

    Quartz Primer is a premium-quality, water-based, 100% acrylic, quick-drying textured primer. It is specially formulated to be the only primer used underneath all Meoded interior and exterior decorative plasters. Interior surfaces may require initial PVA type primer to seal new drywall before using Quartz Primer.  Universal or oil-based primer would be necessary first step if previously painted with oil-based products. Coverage 250-400 sq/ft per gallon.

    $29.99$22.99

  • Meoded Sapphire Metallic

    Meoded Meoded Sapphire Metallic

    Meoded Sapphire Metallic is a pearlescent paint made with fine mica powders that gives walls, metal, trim, furniture or any other paintable surface a rich, beautiful pearl luster and opulent look of shimmering satin with less environmental impact. Satin Finish Low VOC Water based Coverage: 300 SF/Gal and 75 ft/qt Minimum 2 coats recommended

    $51.99$45.99

  • Rust Arrestor

    Benjamin Moore Rust Arrestor

    Rust Arrestor is a water-based, film-forming primer that chemically transforms rust, halting the corrosion process and enabling the surface to accept a topcoat. When applied over tightly adhering rust, it forms a black, protective film. Features Chemically converts rust to inhibit corrosion Forms a tight chemical bond to rusted surfaces Penetrates into tight areas Suitable for use in USDA inspected facilities Can be top coated with latex, alkyd, urethane, or epoxy finishes Details Available Colors: N/A Sheen (or Gloss): Low Sheen Cleanup: Soap and Water Resin Type: Latex Recommended Use: Interior, Exterior Data Sheets SDS SDS V180-00 (English) SDS V180-00 (Español) TDS TDS V180 (English)

    $115.99$105.99

© 2024 Marketplace Paints, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account