Exterior Paint

Acrylic DTM Enamel is a tough waterborne acrylic enamel that fights rust on metal and provides a smooth, durable finish on wood, drywall and masonry substrates. A special inhibitor in the formula prevents flash rust when applied to ferrous metal, and the smooth dry film is UV and moisture resistant. Features For light-to-moderate industrial, commercial and select residential use Excellent for metal, as well as wood, masonry, drywall and other surfaces Resists flash rust on metal Excellent for all corrugated metal sheeting Can be used on galvanized and aluminum metal Details Available Colors: White, Bronzetone, Black, Safety Yellow, Safety Red, Safety Blue, and Safety Green; Pastel Base, Tint Base, Deep Base, and Clear Base Sheen (or Gloss): Gloss Cleanup: Soap and Water Resin Type: Waterborne Acrylic Recommended Use: Interior, Exterior Colorant Used: Universal Data Sheets SDS SDS V330-01 (English) SDS V330-01 (Español) SDS V330-10 (English) SDS V330-10 (Español) SDS V330-20 (English) SDS V330-20 (Español) SDS V330-30 (English) SDS V330-30 (Español) SDS V330-62 (English) SDS V330-62 (Español) SDS V330-80 (English) SDS V330-80 (Español) SDS V330-85 (English) SDS V330-85 (Español) SDS V330-86 (English) SDS V330-86 (Español) SDS V330-87 (English) SDS V330-87 (Español) SDS V330-88 (English) SDS V330-88 (Español) TDS TDS V330 (English)

Read more less

Acrylic DTM Enamel is a tough waterborne acrylic enamel that fights rust on metal and provides a smooth, durable finish on wood, drywall and masonry substrates. A special inhibitor in the formula prevents flash rust when applied to ferrous metal, and the smooth dry film is UV and moisture resistant. Features For light-to-moderate industrial, commercial and select residential use Excellent for metal, as well as wood, masonry, drywall and other surfaces Resists flash rust on metal Excellent for all corrugated metal sheeting Can be used on galvanized and aluminum metal Details Available Colors: White; Pastel Base, Tint Base, Deep Base, and Clear Base Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: Waterborne Acrylic Recommended Use: Interior, Exterior Data Sheets SDS SDS V331-01 (English) SDS V331-01 (Español) SDS V331-41 (English) SDS V331-41 (Español) SDS V331-42 (English) SDS V331-42 (Español) SDS V331-43 (English) SDS V331-43 (Español) SDS V331-54 (English) SDS V331-54 (Español) SDS V331-85 (English) SDS V331-85 (Español) SDS V331-86 (English) SDS V331-86 (Español) SDS V331-87 (English) SDS V331-87 (Español) SDS V331-88 (English) SDS V331-88 (Español) TDS TDS V331 (English)

Read more less

Water Reducible Epoxy Ester Primer is a water-thinned industrial primer offering the application and performance characteristics of a conventional alkyd primer. Features Water thinned industrial primer with excellent wetting properties Formulated with corrosion inhibiting pigments for rust protection Application and performance characteristics of a conventional alkyd primer without theclean-up normally associated with these products Details Available Colors: Red, Gray Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: Epoxy Ester Recommended Use: Interior, Exterior Data Sheets SDS SDS V125-20 (English) SDS V125-20 (Español) SDS V125-70 (English) SDS V125-70 (Español) TDS TDS V125 (English)

Read more less

A new generation of waterborne, acrylic emulsion pool paints which can be applied over most types of pool coatings in good condition, as well as bare concrete or plaster surfaces. WR-1000 series pool paint can be applied to slightly damp surfaces, dries quickly for recoating and withstands continuous submersion in fresh and salt water. Ready to use Long-lasting color and protection Use with fresh or salt water   Specifications Brand Name:Insl-X Product Type: Swimming Pool Paint Brand Name: Insl-X Coating Material: Acrylic Color: White Container Size: 1 gallon (US) Coverage Area: 300 - 400 square foot Sheen: Semi-Gloss Time Before Recoating: 6 hour VOC Level: 289 grams per liter Clean Up: Soap and Water Indoor or Outdoor: Indoor and Outdoor Full Cure Time: 14 day Recommended Surface: Concrete, Marcite and Gunite Click here to see the Safety Data Sheets for this product.

Read more less

Sure Step® Anti-Slip Coating provides a durable skid resistant finish for interior or exterior application. Imparts excellent color retention, abrasion resistance and resistance to ponding water. Sure Step® is water reduced which allows for fast dry plus easy application and clean up. Available in 5 ready mixed colors and white. There is also a clear coat available in this line that can be used as a stand-alone clear finish. Sure Step® can be exposed to light foot traffic 24 hours after application of the final coat. Allow 4-5 days for heavier or continuous foot traffic. Sure Step® coating is formulated to have high slip resistance for areas that require extra skid resistance. Sure Step® Anti-Slip Coating has a Coefficient of Friction rating of > 1.12. ADA (Americans with Disabilities Act)  High traffic resistance Ideal for stairs, walkways, patios & more Fast drying Durable Easy application Interior/Exterior use Fills and seals cracks Coverage: 80-120sq.ft. per gallon Dry Times:  Tack Free: 1-2 hours Recoat: 8 hours Light Foot Traffic: 24 hours Heavy Foot Traffic: 4-5 days Recommended For: Interior & exterior walking surfaces such as tennis courts, patios, walkways, steps, pool decks and areas subjected to foot traffic. Limitations:  On exterior applications, do not apply when rain is threatening. Not for immersion service. Do not use on garage floors or other surfaces that will be driven on.  Available Sheens: Flat Available Colors: White, Gray Pearl, Light Gray, Tile Red, Pine Green, Desert Sand, and Saddle Brown NOTE: For custom colors we can only mix light to medium tone colors in Sure Step. SEE COLOR CHART AND BROCHURE HERE.  CLICK HERE TO VIEW THE BENJAMIN MOORE COLOR GALLERY. Cleanup: Soap and water Resin Type: Acrylic Copolymer VOC Level: < 250 g/L

Read more less

This 100% Acrylic Enamel is designed to produce a rugged, durable finish in light commercial or residential floor applications. Tough Shield® Floor and Patio Coating has good abrasion resistance and possesses excellent wearing qualities. It will withstand detergents, oils, grease and scrubbing. The cured film has excellent resistance to ponding water. Tough Shield® Floor & Patio dries to a pleasant satin finish.  Outstanding durability 100% acrylic enamel formula Good abrasion resistance Excellent wearing qualities For interior or exterior use Coverage: 400-500sq.ft. per gallon Dry Times: Tack Free: 2 hours Recoat: 4 hours (interior), 12 hours (exterior) Light Foot Traffic: 24 hours Heavy Foot Traffic: 5-7 days Recommended For: Use on floors, steps, porches, patios and walkways. NOTE: DO NOT USE ON GARAGE FLOORS OR CAR PARKING SURFACES.  Limitations: Apply when surface & air temperatures are above 50 °F (10 °C). Do not apply if temperature is within 5° of Dew Point or if rain is expected within 12 hours NOTE: DO NOT USE ON GARAGE FLOORS OR CAR PARKING SURFACES. Cleanup: Soap and water Available Sheens: Satin Available Colors: White, Black, Gray Pearl, Light Gray, Tile Red, Desert Sand, Saddle Brown, and custom colors. Resin Type: Acrylic Recommended Use: Interior or exterior MPI Rating: 60 VOC Level: ≤ 250 g/L  

Read more less

TuffCrete® WB Acrylic Waterproofing Concrete Stain is a water reduced coating designed for interior or exterior masonry surfaces. It may be applied in one coat as a stain, or in two coats as an opaque finish. An ideal choice for either vertical or horizontal masonry surfaces. This product is available in clear, white, ready mixed colors, and a full range of tinting bases. Not for immersion service.  Waterborne acrylic formula Non Fading Fast Drying Rugged, durable finish Resists detergents, oils, grease &scrubbing For interior or exterior masonry surfaces Coverage: 400-500sq.ft. per gallon Dry Times:  Tack Free: 30 minutes Recoat: 4 hours Light Foot Traffic: 24 hours Heavy Fott Traffic: 72 hours  Recommended For: TuffCrete 100% Acrylic WB Concrete Stain forms a tough, durable film on most interior or exterior masonry surfaces. It may be applied to concrete walls, balconies, patios, pool decks, basement floors, or concrete columns. Apply one coat for a stain look and two coats as an opaque finish. Limitations: Do not apply in direct sunlight or on hot surfaces. Do not apply if the surface or ambient temperature is below 50 °F (10 °C) or more than 90 °F (32.2 °C). NOT RECOMMENDED for driveways, garage floors, heavy industrial floor applications, exterior wood surfaces or for other surfaces that will be exposed to vehicular traffic. Available Sheens: Satin Available Colors: Clear, White, Gray Pearl, Light Gray, Tile Red, Pine Green, Desert Sand, Saddle Brown, and custom colors. Cleanup: Soap and water Resin Type: Acrylic Recommended Use: Interior or exterior MPI Rating: 58, 99 VOC Level: 94 Grams/Liter or .78 Lbs./Gallon  SURFACE PREPARATION: Uncoated Concrete - All cured and uncoated concrete must be at least 30 days old, clean, dry and free of oil, grease, dirt, laitance or other foreign matter that could interfere with penetration or adhesion. Grease, oil, release agents and dirt can be removed by scrubbing the surface with a heavy duty oil and grease emulsifier. Rinse well with clean water. Bare concrete must be porous. Most horizontal concrete requires acid etching with a concrete etching product. Follow all label instructions carefully. A properly etched surface should have a texture like medium/fine sandpaper. NOTE: Extremely smooth or dense pre-cast panels should be aggregate blasted or acid etched prior to application of the stain in order to assure adequate penetration and adhesion. Previously Coated Concrete - Remove all oil, grease, dirt, loose paint or other foreign matter. Scrub the surface with a heavy duty oil and grease emulsifier. Rinse well with clean water and allow it to dry thoroughly. Glossy surfaces must be sanded to remove all gloss. A test area to insure applicability is recommended. Acid etching of painted or sealed surfaces is neither required nor recommended. Coating Preparation- Be sure coating is mixed thoroughly prior to application. If more than one batch number is being used, it is a good idea to intermix gallons in a larger container to assure color uniformity. APPLICATION:  TuffCrete® 100% Acrylic WB Concrete Stain may be applied by nylon brush, short nap roller, airless, HVLP or conventional spray. Apply material in a uniform, even coat at up to 550 square feet per gallon. Actual spread rate is determined by surface texture and application technique. Always attempt to coat large surface areas by painting up to natural breaks or in defined sections in order to reduce the potential for lap marks. For horizontal applications, allow to dry a full minimum of 24 hours before light foot traffic and a minimum of 72 hours before heavier foot traffic. Periods of high humidity, low temperatures or applying a heavy coat will extend the dry time. Do not apply in direct sunlight. Do not apply if ambient or surface temperature is greater than 90 °F or less than 50 °F.

Read more less

TuffCrete® Solvent Acrylic Concrete Waterproofing Stain is a solvent-borne acrylic concrete stain designed for deep penetration into concrete surfaces. With excellent adhesion, this product delivers outstanding durability in a low-sheen finish that helps to hide surface defects. It can be applied in one coat as a stain, or in two coats for an opaque finish. Excellent adhesion Durable low-sheen finish Color fade resistance Quick-drying Deep concrete penetration Superior wear resistance View the sell sheet for more information

Read more less

WaterBlock Acrylic Masonry Waterproofer is designed to waterproof interior or exterior masonry surfaces. WaterBlock is great for basement walls, foundations, retaining walls, exterior masonry walls, and more. WaterBlock is applied directly to bare masonry surfaces. This product is not meant for floors. It is alkali resistant and provides positive sealing and waterproofing over bare concrete block, brick, stucco or tilt up concrete walls. No pre-mixing or surface pre-wetting is necessary with this product. This product contains an agent that inhibits the growth of mildew on the surface of the paint film. Features: Water based Dries fast High alkali resistance - up to pH-13 Suitable for Stucco, Brick, Cinder and Concrete Block Keeps basement walls dry Can be applied to wet walls Coverage: 75-100 sq. feet per gallon Sheen (gloss): Flat

Read more less