Exterior Paint
Benjamin Moore Acrylic DTM Enamel - Semi-Gloss
Acrylic DTM Enamel is a tough waterborne acrylic enamel that fights rust on metal and provides a smooth, durable finish on wood, drywall and masonry substrates. A special inhibitor in the formula prevents flash rust when applied to ferrous metal, and the smooth dry film is UV and moisture resistant. Features For light-to-moderate industrial, commercial and select residential use Excellent for metal, as well as wood, masonry, drywall and other surfaces Resists flash rust on metal Excellent for all corrugated metal sheeting Can be used on galvanized and aluminum metal Details Available Colors: White; Pastel Base, Tint Base, Deep Base, and Clear Base Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: Waterborne Acrylic Recommended Use: Interior, Exterior Data Sheets SDS SDS V331-01 (English) SDS V331-01 (Español) SDS V331-41 (English) SDS V331-41 (Español) SDS V331-42 (English) SDS V331-42 (Español) SDS V331-43 (English) SDS V331-43 (Español) SDS V331-54 (English) SDS V331-54 (Español) SDS V331-85 (English) SDS V331-85 (Español) SDS V331-86 (English) SDS V331-86 (Español) SDS V331-87 (English) SDS V331-87 (Español) SDS V331-88 (English) SDS V331-88 (Español) TDS TDS V331 (English)
$69.99$62.99
-
Benjamin Moore Chlorinated Rubber Swimming Pool Paint
Chlorinated Rubber Swimming Pool Paint is a chlorinated rubber coating for new or old in-ground masonry pools. It provides excellent chemical resistance and is durable in fresh or salt water, and also acceptable for use in chlorinated pools. Use Chlorinated Rubber Swimming Pool Paint over existing chlorinated rubber based pool paint or over bare concrete, marcite, gunite, or other masonry surfaces in good condition. Features Chlorinated rubber system For use on new or old in-ground masonry pools For use in fresh, salt water, or chlorinated pools Details Available Colors: White, Aquamarine, Ocean Blue, Royal Blue, Red, Black Sheen (or Gloss): Semi-Gloss Cleanup: Solvent Resin Type: Chlorinated Rubber Recommended Use: Interior, Exterior Data Sheets SDS SDS CR-2602 (English) SDS CR-2602 (Español) SDS CR-2610 (English) SDS CR-2610 (Español) SDS CR-2619 (English) SDS CR-2619 (Español) SDS CR-2620 (English) SDS CR-2620 (Español) SDS CR-2623 (English) SDS CR-2623 (Español) SDS CR-2624 (English) SDS CR-2624 (Español) TDS TDS CR-26XX (English) ODS Painting Guide - CR-2600 (English) Painting Guide - CR-2600 (Español) Pool Paint FAQs (English) Pool Paint Solvent Tests (English) Swimming Pool Paint - Color Selection (English) Swimming Pool Paint - Color Selection (Español)
$90.99
-
Benjamin Moore Cryli Cote® 100% Acrylic Exterior Paint - Semi-Gloss
Cryli Cote® is the right exterior paint for quality, durability, and value. With its 100% acrylic formula it delivers excellent adhesion and dries quickly. Feature Delivers excellent adhesion and resistance to cracking and peeling Good coverage and self-priming on most surfaces Quick-drying Delivers durability and performance that will last Provides a mildew-resistant coating Comes with a 20-year warranty (see label or TDS for details) View the sell sheet for more information More Information Available Colors: White. Tint bases available for all colors Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Exterior MPI Rating: 10 VOC Level: 46.2 SAFETY DATA SHEETS SDS N2-1 (English) SDS N2-33 (English) SDS N2-36 (English) TECHNICAL DATA SHEETS TDS N2 (English)
$55.99$48.99
-
Benjamin Moore Epoxy Mastic Coating
Epoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack. Features High solids (79%) and high build – excellent for corners, crevices and welds Surface-tolerant mastic for marginal substrates Hard scratch- and impact-resistant coating Excellent for secondary containment Qualifies for LEED credits Suitable for use in USDA inspected facilities Details Available Colors: Tintable White, Deep Base and Clear Base Sheen (or Gloss): Semi-Gloss Cleanup: Solvent Resin Type: Polyamide Epoxy Recommended Use: Interior, Exterior Colorant Used: Industrial Data Sheets SDS SDS V160-86 (English) SDS V160-86 (Español) SDS V160-87 (English) SDS V160-87 (Español) SDS V160-88 (English) SDS V160-88 (Español) SDS V160-90 (English) SDS V160-90 (Español) TDS CSI Format Epoxy Product Guide Specifications TDS V160 (English)
$70.99
-
Benjamin Moore Insl-X - Epoxy Kit
Epoxy Pool Paint is a high solids, two-component polyamide epoxy coating that offers excellent chemical and abrasion resistance. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. Use Epoxy Pool Paint over previous epoxy coatings, steel, fiberglass, bare concrete, marcite, gunite, or other masonry surfaces in sound condition. Two-component polyamide epoxy pool paint For use on concrete, marcite, gunite, fiberglass, and steel pools Can also be used over existing epoxy coatings Extremely durable Resistant to common pool chemicals, including chlorine
$247.99
-
Benjamin Moore Insl-X Garage Guard
GarageGuard® Water Based 2 Part Epoxy is a new generation water- based catalyzed epoxy which offers performance equal to traditional solvent based epoxy systems. It provides superior chemical, abrasion and impact resistance when compared to conventional waterborne epoxies. The highly cross-linked film provides years of service. GarageGuard® Water Based 2 Part Epoxy produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling. This product is suitable for use in USDA inspected facilities. This is a two component product with a mix ratio of 3:1. It requires 3 parts of the proper “A” or Base Component (underfilled gallon can) mixed with 1 part of the proper “B” or Converter Component (quart). Mixing of Partial Kits Is Not Recommended. Waterborne 2-part epoxy Durable semi-gloss finish, abrasion & impact resistant Will not lift existing coatings Resists hot tire pick-up from cars Resists most automobile fluids Recoat in 8 hours; park vehicles in 3 days For Garage Floors, Basement Floors and Other Concrete Surfaces Coverage: 250-300sq.ft. per gallon Dry Times: Tack Free: 2 hours Recoat: 8 hours Foot Traffic: 24 hours Vehicular Traffic: 72 hours Recommended For: GarageGuard Waterborne Epoxy is designed for use on basement floors, garage floors and other concrete surfaces. Ideal for use in food and beverage processing, transportation, warehouses, industrial refurbishment, healthcare, schools, large commercial structures, industrial and commercial flooring, and other areas where a performance epoxy is needed. Limitations: Do not apply when air, surface or product temperature is below 50 °F Use the entire gallon of GarageGuard® within 4 hours of initial mixing. Mixing of Partial Kits Is Not Recommended. Not recommended for use in immersion service or acidic exposures. Cleanup: Water Resin Type: Amine Adduct Epoxy Recommended Use: Interior Sheen: Semi-gloss Available Colors: Showroom Gray, Desert Sand, Custom Colors MPI Rating: N/A VOC Level: < 250 g/L
$145.99$133.99
-
Benjamin Moore Insl-X Pool - Epoxy Kit
Epoxy Pool Paint is a high solids, two-component polyamide epoxy coating that offers excellent chemical and abrasion resistance. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. Use Epoxy Pool Paint over previous epoxy coatings, steel, fiberglass, bare concrete, marcite, gunite, or other masonry surfaces in sound condition. Two-component polyamide epoxy pool paint For use on concrete, marcite, gunite, fiberglass, and steel pools Can also be used over existing epoxy coatings Extremely durable Resistant to common pool chemicals, including chlorine
$247.99
-
Benjamin Moore Insl-X Pool - Waterborne
A new generation of waterborne, acrylic emulsion pool paints which can be applied over most types of pool coatings in good condition, as well as bare concrete or plaster surfaces. WR-1000 series pool paint can be applied to slightly damp surfaces, dries quickly for recoating and withstands continuous submersion in fresh and salt water. Ready to use Long-lasting color and protection Use with fresh or salt water Specifications Brand Name:Insl-X Product Type: Swimming Pool Paint Brand Name: Insl-X Coating Material: Acrylic Color: White Container Size: 1 gallon (US) Coverage Area: 300 - 400 square foot Sheen: Semi-Gloss Time Before Recoating: 6 hour VOC Level: 289 grams per liter Clean Up: Soap and Water Indoor or Outdoor: Indoor and Outdoor Full Cure Time: 14 day Recommended Surface: Concrete, Marcite and Gunite Click here to see the Safety Data Sheets for this product.
$99.99
-
Benjamin Moore MULTAPPLY™ Waterborne Acrylic Enamel - Semi-Gloss
MULTAPPLY™ Waterborne Acrylic Semi-Gloss Enamel is an interior/exterior finish, which is suitable for coating primed metal, wood, or masonry surfaces. The acrylic resin provides excellent color and gloss retention as well as tenacious adhesion properties. Feature Easy to use Multi-substrate Interior/Exterior Durable Waterborne acrylic formula More Information Available Colors: White (Tintable), Black. Tint Bases available for all colors. Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior MPI Rating: 153 VOC Level: 97.0 SAFETY DATA SHEETS SDS 1190-1 (English) SDS 1190-2 (English) SDS 1190-33 (English) SDS 1190-36 (English) TECHNICAL DATA SHEETS TDS 1190 (English)
$65.99$56.99
-
Benjamin Moore Ultra Spec HP D.T.M. Acrylic Semi-Gloss
Ultra Spec HP D.T.M. Acrylic Semi-Gloss Direct to metal application Improved gloss and color retention Easy application Provides superior rust inhibition and control Primer and finish coat Fast dry Excellent adhesion MPI: 141, 153, 163 Engineered with Gennex® Color Technology Recommended for:Ferrous or non-ferrous metal, Bilco® doors, railings, structural or support steel, wood, roof decks, equipment, fencing, metal storage shed and general maintenance painting interior or exterior surfaces. FEATURES Available Colors: 08 Safety White, 15 Safety Yellow, 21 Safety Red, 60 Bronzetone and 82 Safety Black Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Interior, Exterior MPI Rating: 141, 153 VOC Level: 147.0 Color available: 08 Safety White, 15 Safety Yellow, 21 Safety Red, 60 Bronzetone and 82 Safety Black DATASHEETS SAFETY DATA SHEET: HP2908_SDS_EN.PDF HP2908_SDS_SP.PDF HP2915_SDS_EN.PDF HP2915_SDS_SP.PDF HP291X_SDS_EN.PDF HP291X_SDS_SP.PDF HP2921_SDS_EN.PDF HP2921_SDS_SP.PDF HP292X_SDS_EN.PDF HP292X_SDS_SP.PDF HP2930_SDS_EN.PDF HP2930_SDS_SP.PDF HP293X_SDS_EN.PDF HP293X_SDS_SP.PDF HP2941_SDS_EN.PDF HP2941_SDS_SP.PDF HP294X_SDS_EN.PDF HP294X_SDS_SP.PDF HP2964_SDS_EN.PDF HP2964_SDS_SP.PDF HP2982_SDS_EN.PDF HP2982_SDS_SP.PDF TECHNICAL DATA SHEET: HP29_TDS_US.pdf OTHER DATA SHEET:
$87.99$73.99
-
Benjamin Moore Waterborne Swimming Pool Paint - Semi-Gloss
Waterborne Swimming Pool Paint can be applied to slightly damp surfaces, dries quickly for recoating, and withstands continuous submersion in fresh or salt water. Use Waterborne Swimming Pool Paint over most types of properly prepared existing pool paints, as well as bare concrete or plaster, marcite, gunite, and other masonry surfaces in sound condition. Features Acrylic emulsion pool paint Can be applied over most types of properly prepared existing pool paints Ideal for bare concrete, marcite, gunite, and other masonry Long-lasting color and protection Quick-drying Details Available Colors: White, Aquamarine, Ocean Blue, Royal Blue, Red, Black Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior Data Sheets SDS SDS WR-1002 (English) SDS WR-1002 (Español) SDS WR-1010 (English) SDS WR-1010 (Español) SDS WR-1019 (English) SDS WR-1019 (Español) SDS WR-1020 (English) SDS WR-1020 (Español) SDS WR-1023 (English) SDS WR-1023 (Español) SDS WR-1024 (English) SDS WR-1024 (Español) TDS TDS WR-1XXX (English) ODS Painting Guide - WR-10XX (English) Painting Guide - WR-10XX (Español) Pool Paint FAQs (English) Pool Paint Solvent Tests (English) Swimming Pool Paint - Color Selection (English) Swimming Pool Paint - Color Selection (Español)
$99.99
-
Benjamin Moore Rust-A-Void™ Enamel - Semi-Gloss
Coronado® Rust-A-Void™ Rust Preventative Polyurethane Enamels create an easy-to-apply, durable, rust-inhibitive film that prolongs the integrity of the substrate. Feature Abrasion Resistant Tenacious Adhesion Rust Preventative More Information Available Colors: White (Tintable) (1), Tint Base (33), Accent Base (36) Sheen (or Gloss): Semi-Gloss Cleanup: Solvent Resin Type: Alkyd Urethane Recommended Use: Interior, Exterior MPI Rating: VOC Level: 389.0 SAFETY DATA SHEETS SDS CR13-1 (English) SDS CR13-33 (English) SDS CR13-36 (English) SDS R13-1 (English) SDS R13-33 (English) SDS R13-36 (English) TECHNICAL DATA SHEETS TDS CR13 (English) TDS R13 (English)
$74.99$26.99
