Benjamin Moore

Aqua Lock® Plus is a multi-purpose, 100% acrylic, water-based primer sealer for outstanding everyday stain blocking on a variety of surfaces. It adheres to interior and exterior surfaces and can be top coated with latex or oil-based coatings. Features 100% acrylic Blocks tough stains Provides a mold-resistant coating, including in high-humidity areas Quick-drying Top coat in 1 hour Details Available Colors: White, Black, Deep Base Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior Data Sheets SDS SDS AQ-0400 (English) SDS AQ-0400 (Español) SDS AQ-0420 (English) SDS AQ-0420 (Español) SDS AQ-0577 (English) SDS AQ-0577 (Español) TDS TDS AQ-0XXX (English)

Read more less

Chlorinated Rubber Swimming Pool Paint is a chlorinated rubber coating for new or old in-ground masonry pools. It provides excellent chemical resistance and is durable in fresh or salt water, and also acceptable for use in chlorinated pools. Use Chlorinated Rubber Swimming Pool Paint over existing chlorinated rubber based pool paint or over bare concrete, marcite, gunite, or other masonry surfaces in good condition. Features Chlorinated rubber system For use on new or old in-ground masonry pools For use in fresh, salt water, or chlorinated pools Details Available Colors: White, Aquamarine, Ocean Blue, Royal Blue, Red, Black Sheen (or Gloss): Semi-Gloss Cleanup: Solvent Resin Type: Chlorinated Rubber Recommended Use: Interior, Exterior Data Sheets SDS SDS CR-2602 (English) SDS CR-2602 (Español) SDS CR-2610 (English) SDS CR-2610 (Español) SDS CR-2619 (English) SDS CR-2619 (Español) SDS CR-2620 (English) SDS CR-2620 (Español) SDS CR-2623 (English) SDS CR-2623 (Español) SDS CR-2624 (English) SDS CR-2624 (Español) TDS TDS CR-26XX (English) ODS Painting Guide - CR-2600 (English) Painting Guide - CR-2600 (Español) Pool Paint FAQs (English) Pool Paint Solvent Tests (English) Swimming Pool Paint - Color Selection (English) Swimming Pool Paint - Color Selection (Español)

Read more less

GarageGuard® Water Based 2 Part Epoxy is a new generation water- based catalyzed epoxy which offers performance equal to traditional solvent based epoxy systems. It provides superior chemical, abrasion and impact resistance when compared to conventional waterborne epoxies. The highly cross-linked film provides years of service. GarageGuard® Water Based 2 Part Epoxy produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling. This product is suitable for use in USDA inspected facilities. This is a two component product with a mix ratio of 3:1. It requires 3 parts of the proper “A” or Base Component (underfilled gallon can) mixed with 1 part of the proper “B” or Converter Component (quart). Mixing of Partial Kits Is Not Recommended.  Waterborne 2-part epoxy Durable semi-gloss finish, abrasion & impact resistant  Will not lift existing coatings Resists hot tire pick-up from cars Resists most automobile fluids Recoat in 8 hours; park vehicles in 3 days For Garage Floors, Basement Floors and Other Concrete Surfaces Coverage: 250-300sq.ft. per gallon Dry Times:  Tack Free: 2 hours Recoat: 8 hours Foot Traffic: 24 hours Vehicular Traffic: 72 hours Recommended For: GarageGuard Waterborne Epoxy is designed for use on basement floors, garage floors and other concrete surfaces. Ideal for use in food and beverage processing, transportation, warehouses, industrial refurbishment, healthcare, schools, large commercial structures, industrial and commercial flooring, and other areas where a performance epoxy is needed.    Limitations: Do not apply when air, surface or product temperature is below 50 °F Use the entire gallon of GarageGuard® within 4 hours of initial mixing. Mixing of Partial Kits Is Not Recommended. Not recommended for use in immersion service or acidic exposures. Cleanup: Water Resin Type: Amine Adduct Epoxy Recommended Use: Interior Sheen: Semi-gloss Available Colors: Showroom Gray, Desert Sand, Custom Colors MPI Rating: N/A VOC Level: < 250 g/L

Read more less

Rubber Based Swimming Pool Paint provides a durable low-sheen finish for use in residential and commercial concrete pools. It delivers excellent chemical and abrasion resistance and is suitable for use in fresh or salt water. Also acceptable for use in chlorinated pools. Use Rubber Based Swimming Pool Paint over previous chlorinated rubber paint or synthetic rubber-based pool paint or over bare concrete, marcite, gunite, or other masonry surfaces in good condition. Features OTC-compliant, solvent-based pool paint For residential or commercial pools Excellent chemical and abrasion resistance For use over existing chlorinated rubber or synthetic rubber-based pool paints Ideal for bare concrete, marcite, gunite, and other masonry For use in fresh, salt water, or chlorinated pools Details Available Colors: White, Aquamarine, Ocean Blue, Royal Blue, Black Sheen (or Gloss): Satin Cleanup: Solvent Resin Type: Synthetic Rubber Recommended Use: Interior, Exterior Data Sheets SDS SDS RP-2710 (English) SDS RP-2710 (Español) SDS RP-2719 (English) SDS RP-2719 (Español) SDS RP-2720 (English) SDS RP-2720 (Español) SDS RP-2723 (English) SDS RP-2723 (Español) SDS RP-2724 (English) SDS RP-2724 (Español) TDS TDS RP-27XX (English) ODS Painting Guide - RP-2700 (English) Painting Guide - RP-2700 (Español) Pool Paint FAQs (English) Pool Paint Solvent Tests (English) Swimming Pool Paint - Color Selection (English) Swimming Pool Paint - Color Selection (Español)

Read more less

Rust Arrestor is a water-based, film-forming primer that chemically transforms rust, halting the corrosion process and enabling the surface to accept a topcoat. When applied over tightly adhering rust, it forms a black, protective film. Features Chemically converts rust to inhibit corrosion Forms a tight chemical bond to rusted surfaces Penetrates into tight areas Suitable for use in USDA inspected facilities Can be top coated with latex, alkyd, urethane, or epoxy finishes Details Available Colors: N/A Sheen (or Gloss): Low Sheen Cleanup: Soap and Water Resin Type: Latex Recommended Use: Interior, Exterior Data Sheets SDS SDS V180-00 (English) SDS V180-00 (Español) TDS TDS V180 (English)

Read more less