Benjamin Moore Specialty Paints

TuffCrete® Solvent Acrylic Concrete Waterproofing Stain is a solvent-borne acrylic concrete stain designed for deep penetration into concrete surfaces. With excellent adhesion, this product delivers outstanding durability in a low-sheen finish that helps to hide surface defects. It can be applied in one coat as a stain, or in two coats for an opaque finish. Excellent adhesion Durable low-sheen finish Color fade resistance Quick-drying Deep concrete penetration Superior wear resistance Details Available Colors: Clear (High Gloss), Tintable White, Gray Pearl, Light Gray, Tile Red, Terracotta, Desert Sand, Saddle Brown, Neutral Base Sheen (or Gloss): Low Sheen Cleanup: Solvent Resin Type: Acrylic Recommended Use: Interior, Exterior Data Sheets SDS SDS CST-5100 (English) SDS CST-5100 (Español) SDS CST-5110 (English) SDS CST-5110 (Español) SDS CST-5190 (English) SDS CST-5190 (Español) SDS CST-5308 (English) SDS CST-5308 (Español) SDS CST-5310 (English) SDS CST-5310 (Español) SDS CST-5505 (English) SDS CST-5505 (Español) SDS CST-5509 (English) SDS CST-5509 (Español) SDS CST-5789 (English) SDS CST-5789 (Español) SDS CST-5922 (English) SDS CST-5922 (Español) SDS CST-5998 (English) SDS CST-5998 (Español)

Read more less

Rust Arrestor is a water-based, film-forming primer that chemically transforms rust, halting the corrosion process and enabling the surface to accept a topcoat. When applied over tightly adhering rust, it forms a black, protective film. Features Chemically converts rust to inhibit corrosion Forms a tight chemical bond to rusted surfaces Penetrates into tight areas Suitable for use in USDA inspected facilities Can be top coated with latex, alkyd, urethane, or epoxy finishes Details Available Colors: N/A Sheen (or Gloss): Low Sheen Cleanup: Soap and Water Resin Type: Latex Recommended Use: Interior, Exterior Data Sheets SDS SDS V180-00 (English) SDS V180-00 (Español) TDS TDS V180 (English)

Read more less

Paint Extender Specially formulated to enhance the application properties of our premium products without adverse effects on dry film properties Proprietary 100% acrylic Very low VOC For interior and exterior use FEATURES   Available Colors: Clear Sheen (or Gloss): N/A Cleanup: Soap and Water Resin Type: Proprietary Acrylic Latex Recommended Use: Interior, Exterior MPI Rating: VOC Level: 6.0 Color available: Clear DATASHEETS SAFETY DATA SHEET: 51800_SDS_EN.pdf 51800_SDS_SP.pdf TECHNICAL DATA SHEET: 518_TDS_US.pdf OTHER DATA SHEET:

Read more less

Floor & Patio Low Sheen Enamel Easy application – Goes on Smoothly Resistant to soaps and detergents, grease and oil Durable Finish – Resists marring and scratching and delivers lasting finish Low VOC – Environmentally friendly Interior/Exterior Use – Can be used over multiple substrates Engineered with Gennex® Color Technology View the sell sheet for more information Recommended for:Particularly recommended for basements, porches, patios, breezeways, showrooms, and light industrial applications.   FEATURES  Available Colors: White 01, Light Gray 70, Deck Gray 71, Platinum Gray 74 Sheen (or Gloss): Low Sheen Cleanup: Soap and Water Resin Type: Waterborne Acrylic Urethane Recommended Use: Interior, Exterior MPI Rating: 60 VOC Level: 44.0 Color available: White 01, Light Gray 70, Deck Gray 71, Platinum Gray 74 DATASHEETS SAFETY DATA SHEET: N12201_SDS_EN.pdf N12201_SDS_SP.pdf N1221X_SDS_EN.pdf N1221X_SDS_SP.pdf N1222X_SDS_EN.pdf N1222X_SDS_SP.pdf N1223X_SDS_EN.pdf N1223X_SDS_SP.pdf N1224X_SDS_EN.pdf N1224X_SDS_SP.pdf N12270_SDS_EN.pdf N12270_SDS_SP.pdf N12271_SDS_EN.pdf N12271_SDS_SP.pdf N12274_SDS_EN.pdf N12274_SDS_SP.pdf TECHNICAL DATA SHEET: N122_TDS_US.pdf OTHER DATA SHEET:

Read more less

GarageGuard® Water Based 2 Part Epoxy is a new generation water- based catalyzed epoxy which offers performance equal to traditional solvent based epoxy systems. It provides superior chemical, abrasion and impact resistance when compared to conventional waterborne epoxies. The highly cross-linked film provides years of service. GarageGuard® Water Based 2 Part Epoxy produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling. This product is suitable for use in USDA inspected facilities. This is a two component product with a mix ratio of 3:1. It requires 3 parts of the proper “A” or Base Component (underfilled gallon can) mixed with 1 part of the proper “B” or Converter Component (quart). Mixing of Partial Kits Is Not Recommended.  Waterborne 2-part epoxy Durable semi-gloss finish, abrasion & impact resistant  Will not lift existing coatings Resists hot tire pick-up from cars Resists most automobile fluids Recoat in 8 hours; park vehicles in 3 days For Garage Floors, Basement Floors and Other Concrete Surfaces Coverage: 250-300sq.ft. per gallon Dry Times:  Tack Free: 2 hours Recoat: 8 hours Foot Traffic: 24 hours Vehicular Traffic: 72 hours Recommended For: GarageGuard Waterborne Epoxy is designed for use on basement floors, garage floors and other concrete surfaces. Ideal for use in food and beverage processing, transportation, warehouses, industrial refurbishment, healthcare, schools, large commercial structures, industrial and commercial flooring, and other areas where a performance epoxy is needed.    Limitations: Do not apply when air, surface or product temperature is below 50 °F Use the entire gallon of GarageGuard® within 4 hours of initial mixing. Mixing of Partial Kits Is Not Recommended. Not recommended for use in immersion service or acidic exposures. Cleanup: Water Resin Type: Amine Adduct Epoxy Recommended Use: Interior Sheen: Semi-gloss Available Colors: Showroom Gray, Desert Sand, Custom Colors MPI Rating: N/A VOC Level: < 250 g/L

Read more less

Ultra Spec HP D.T.M. Acrylic Semi-Gloss Direct to metal application Improved gloss and color retention Easy application Provides superior rust inhibition and control Primer and finish coat Fast dry Excellent adhesion MPI: 141, 153, 163 Engineered with Gennex® Color Technology Recommended for:Ferrous or non-ferrous metal, Bilco® doors, railings, structural or support steel, wood, roof decks, equipment, fencing, metal storage shed and general maintenance painting interior or exterior surfaces. FEATURES   Available Colors: 08 Safety White, 15 Safety Yellow, 21 Safety Red, 60 Bronzetone and 82 Safety Black Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Interior, Exterior MPI Rating: 141, 153 VOC Level: 147.0 Color available: 08 Safety White, 15 Safety Yellow, 21 Safety Red, 60 Bronzetone and 82 Safety Black DATASHEETS SAFETY DATA SHEET: HP2908_SDS_EN.PDF HP2908_SDS_SP.PDF HP2915_SDS_EN.PDF HP2915_SDS_SP.PDF HP291X_SDS_EN.PDF HP291X_SDS_SP.PDF HP2921_SDS_EN.PDF HP2921_SDS_SP.PDF HP292X_SDS_EN.PDF HP292X_SDS_SP.PDF HP2930_SDS_EN.PDF HP2930_SDS_SP.PDF HP293X_SDS_EN.PDF HP293X_SDS_SP.PDF HP2941_SDS_EN.PDF HP2941_SDS_SP.PDF HP294X_SDS_EN.PDF HP294X_SDS_SP.PDF HP2964_SDS_EN.PDF HP2964_SDS_SP.PDF HP2982_SDS_EN.PDF HP2982_SDS_SP.PDF TECHNICAL DATA SHEET: HP29_TDS_US.pdf OTHER DATA SHEET:

Read more less