Search results for "primer"

Allpro Polyurea Primer Kit is a two component polyurea coating designed to be used as a basecoat of a variety of coating systems. This economical coating provides outstanding adhesion to a variety of properly prepared substrates and performs well in a wide range of temperature conditions. It is fast curing, allowing for re-coat in 2-3 hours. This product is not color stable and is not to be used as a finish coat. Gloss Finish 100% solids Low VOC 3-gallon kit includes Part A Base (2 gallon) and Part B Activator (1 gallon) Coverage for one (1) kit is approx 200-300f or one car bay 1 hour of working time after poured out of mixing bucket Ideal to use as Base Coat for Allpro Floor Flakes 2-3 hour dry time depending on temperature & humidity Provides approximately 10% moisture vapor barrier No UV protection Xylene cleanup Purchase together with Allpro Polyaspartic,  Allpro Floor Flakes or Allpro Color Pods

Read more less

Acrylic Sealer/Finish is an interior/exterior fast drying water-based low-sheen clear coating formulated as a seal coat and/or finish for bare concrete floors and other masonry surfaces. This product is designed for easy application, to reduce water penetration or erosion, efflorescence, spalling, and chalking without changing the natural appearance of the substrate. ACRYLIC SEALER/FINISH Rapid dry-Recoat in 2 hours For use on horizontal and vertical surfaces Can be used over a variety of substrates Ideal for floors View the additional tools for more information Features Available Colors: Clear (00) Sheen (or Gloss): N/A Cleanup: Soap and Water Resin Type: Acrylic Recommended Use: Interior, Exterior MPI Rating: VOC Range: < 200 g/L  SAFETY DATA SHEETS SDS HP1270-00 (English)  TECHNICAL DATA SHEETS TDS HP1270 (English)

Read more less

Ultra Spec Masonry Int/Ext 100% Acrylic Sealer Designed to penetrate and seal the surface of new or previously painted masonry surfaces providing the proper foundation for subsequent finish coats. It can be applied to masonry with pH levels as high as 13. Reduces the porosity of masonry surfaces Provides excellent surface adhesion Tintable High Alkali Resistance - pH 13 Engineered with Gennex® Color Technology Recommended for:For application to new or previously painted masonry surfaces including; tilt-up concrete construction, stucco surfaces and block construction. FEATURES Available Colors: Clear, White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: 100% Acrylic Latex Recommended Use: Exterior MPI Rating: 3 VOC Level: 46.0 Color available: Clear, White DATASHEETS SAFETY DATA SHEET: 60800_SDS_EN.pdf 60800_SDS_SP.pdf 60801_SDS_EN.pdf 60801_SDS_SP.pdf TECHNICAL DATA SHEET:608_TDS_US.pdf OTHER DATA SHEET:

Read more less

AURA Bath & Spa - Matte Ideal for high-humidity environments such as bathrooms and spas Extreme hide and coverage for fewer coats Mildew resistant for a fresh look that lasts Proprietary Color Lock® technology for richer colors that stay true over time Stands up to repeated washing with no color rub-off Paint and primer together Zero VOC, low odor Engineered with Gennex® Color Technology View the sell sheet for more information FEATURES   Available Colors: Available in thousands of colors Sheen (or Gloss): Matte Cleanup: Soap and Water Resin Type: Proprietary 100% Acrylic Recommended Use: Interior MPI Rating: N/A VOC Level: 0.0 Color available: Available in thousands of colors DATASHEETS SAFETY DATA SHEET: 5321X_SDS_EN.pdf 5321X_SDS_SP.pdf 5322X_SDS_EN.pdf 5322X_SDS_SP.pdf 5323X_SDS_EN.pdf 5323X_SDS_SP.pdf 5324X_SDS_EN.pdf 5324X_SDS_SP.pdf TECHNICAL DATA SHEET: 532_TDS_US.pdf OTHER DATA SHEET:

Read more less

We make these custom colored spray cans right in our paint stores for our local customers every week. Custom spray paint provides many options for your paint project! Why settle for limited selection of colors at the Big Box stores when you get the exact color & sheen you need?  Once you have made your selection(s), our paint store experts prepare your color, load your spray can(s) & ship your order. 1. Select your Color 2. Paint Matching: if you cannot find a color in any fan deck, then we have a state of the art color spectrometer. This is a highly specialized camera that allows us to develop a formula to match most any sample you would like to send us. 3. Select application area:  Interior or Exterior use 4. Select your Sheen Interior: Flat, Matte, Eggshell, Satin, or Semi-Gloss Exterior: Flat, Low-Luster, Soft-Gloss Advance Trim & Cabinet: Satin, Semi-Gloss, or High Gloss Application: This product is considered a finish topcoat. While the product used from Benjamin Moore is considered a "paint & primer" quality, we always recommend using a suitable Interior-Exterior Spray Primer, especially over uncoated or metal surfaces.  Also, the Benjamin Moore Advance (water-based alkyd) will have a more durable, enamel-type finish. The Satin and Semi-Gloss for Advance are interior only. The high-gloss can be used in an exterior environment. Coverage: It is difficult to provide an accurate estimate given conditions of the environment or the application. One (1) spray can may cover 4-8sf. Order Includes: custom color paint required to make up to ten (10) spray cans Spray cans are a custom blended product and are not returnable. Please understand that aerosols can only ship via ground shipping, so please plan accordingly.  Disclaimer:  Marketplace Paints uses Benjamin Moore paints to create or match selected color(s). We also use a custom Allpro branded spray can from Seymour of Sycamore. We match spray paints to a color card or fan deck in our store. There may be a difference with color matching depending on the specific paint product, application method, gloss level, film variance, surface substrate, age and light source. Matching colors to paint on a wall, trim or cabinet may not match exactly due to a customer's age of paint, condition of the substrate, or the inherent difference between the way different paint companies blend their paints. We do accept samples mailed into the store. We recommend sending us a very good sample of at least 1"x1" that we can put under our camera matching software in order to get a better match.  

Read more less

We make these custom colored spray cans right in our paint stores for our local customers every week. Custom spray paint provides many options for your paint project! Why settle for limited selection of colors at the Big Box stores when you get the exact color & sheen you need? Once you have made your selection(s), our paint store experts prepare your color, load your spray can(s) & ship your order. 1. Select your Color 2. Paint Matching: if you cannot find a color in any fan deck, then we have a state of the art color spectrometer. This is a highly specialized camera that allows us to develop a formula to match most any sample you would like to send us. 3. Select application area:  The paint product used is suitable for both Interior or Exterior use. So you do not have to select either Interior or Exterior with this product. 4. Select your Sheen:  Satin, Semi-Gloss or Gloss Application: This product is considered a finish topcoat. While the product used from Benjamin Moore is considered a "paint & primer" quality, we always recommend using a suitable Interior-Exterior Spray Primer, especially over uncoated or metal surfaces. Coverage: It is difficult to provide an accurate estimate given conditions of the environment or the application. One (1) spray can may cover 4-8sf. Spray cans are a custom blended product and are not returnable. Please understand that aerosols can only ship via ground shipping, so please plan accordingly.  Disclaimer:  Marketplace Paints uses Benjamin Moore paints to create or match selected color(s). We also use a custom Allpro branded spray can from Seymour of Sycamore. We match spray paints to a color card or fan deck in our store. There may be a difference with color matching depending on the specific paint product, application method, gloss level, film variance, surface substrate, age and light source. Matching colors to paint on a wall, trim or cabinet may not match exactly due to a customer's age of paint, condition of the substrate, or the inherent difference between the way different paint companies blend their paints. We do accept samples mailed into the store. We recommend sending us a very good sample of at least 1"x1" that we can put under our camera matching software in order to get a better match.

Read more less

Velatura Mineral Wash is an authentic mineral-based paint to create mottling or subtle movement effects for a limewash look on Interior drywall in two easy steps with no additional primer. An artistic applicator can paint soft tonal color variations in a brush-applied crosshatch technique for the 1st coat and can use varied techniques with a brush, cloth, or rag for the 2nd coat. Recommended in bedrooms, living rooms, and other common areas (Not recommended for high-traffic)   Toxin-free, Zero-VOC, and environmentally friendly   Brush-applied in two easy steps with no primer Multiple applicators can work the same wall and achieve similar effects Best surface is interior gypsum drywall that is primed For pre-painted surfaces, apply one coat of Romabio MicroGrip Primer first. Handcrafted in Italy. Sizes & Coverage (1 Coat): 1 Liter: 100-140 sq ft 2.5 Liters: 250-350 sq ft 15 Liters: 1500-2100 sq ft Application: PREP: Make sure the surface is clean and ready to be painted.  1st COAT: Apply undiluted or add up to 5% water in a crosshatch technique to fully cover the wall. Let dry to touch before next coat.  2nd COAT: Must dilute 50%-80% with water and then paint in crosshatch technique and use cloth technique if needed.  TOOLS: Apply with a brush for 1st Coat and brush and/or cloth for 2nd coat.  DRY TIME: 4-6 Hours TOUCH UPS: Very flat finish. 

Read more less

Romabio Masonry Flat Paint is an authentic Italian, slaked-lime paint that is specially formulated to create unique white wash effects for Interior and Exterior brick, stone, and other masonry surfaces. It is designed to be easy-to-use and meant to be single coat application.  Once applied, Classico Limewash can be left as a solid coating or it can be distressed by brush, rag or hose water in areas to yield the desired effect. Romabio Masonry Flat Paint. Order as Bianca White or your preferred off-white to light pastel color Romabio - Look Book ▶ Application: No primer needed Two (2) Coat Process Dampen the brick surface prior to the 1st coat Apply with Brush, Roller or Paint sprayer The newer U.S. sizes are ready to use; max water dilution 5% Older Italian product sizes require dilution with 50–70% water Available sizes & coverage: 1 quart: 60–100 SQ FT 1 gallon: 200–250 SQ FT 5 gallon: 1200–1500 SQ FT Use together with Romabio Mineral Shield for a clear topcoat that protects the desired patina finish and resists stains or mildew. Use together with Romabio Masonry Brush specifically designed to use with Romabio lime-based paints.

Read more less

Meoded Marmarino Tintoretto Finish is a natural lime and marble dust paste plaster, which can be used as an interior and exterior flat/low sheen Venetian Plaster. Tintoretto is a contemporary version of traditional smooth stucco which is known for its warmth and dramatic appearance. A wide range of textures can be achieved with Tintoretto™ including marble-like, smooth finish, distressed, or natural stone looks. Due to its natural makeup, Tintoretto allows for the creation of a matte or a slight sheen finish depending upon type of application. First coat should be applied thinly and evenly with stainless trowel as base coat allowing 12hrs to dry. The second coat should be applied tightly in overlapping cross pattern. Pressing or burnishing techniques can be used to achieve up to a low-sheen finish. Allow to dry for 48 hours. Prepare surface with Meoded Quartz Primer One (1) gallon (5kg) covers 40-60sf for 2 coats Four (4) gallon Bucket (20kg) covers 180-220sf for 2 coats Interior or Exterior Low Sheen Finish Color Pack(s) will be added at checkout for selected color & size ordered. These should not be removed from the shopping cart. Meoded Stain Shield clear sealer is recommended as the finishing step after 48hrs of dry time.

Read more less

Intonacco Palladino is a heavier version of Marmarino Palladino - natural lime and marble dust paste plaster which can be used as an interior and exterior decorative wall finish. Palladino's medium size grain forms a thicker body which allows the creation of authentic textures. These textures enhance the look and feel of any location that needs a warm and dramatic appearance. Palladino produces a wide range of textures including a contemporary smooth finish with minimal movement, distressed marble-like finish, or various natural stone-looks. Prepare surface with Meoded Quartz Primer Interior or Exterior 4.25g (20kg) size covers approximately 100-180 sq ft for 2 coat application Color Pack(s) will be added at checkout for selected color & size ordered. These should not be removed from the shopping cart. Meoded Stain Shield clear sealer is recommended as the finishing step.  

Read more less

Gemini EVO Eclipse Waterborne Hardener is premium hardener designed for use with Gemini's EVO Eclipse products. This waterborne hardener increases overall durability and adds tannin-blocking performance to EVO primers. One (1) Liter Adding hardener will increase the gloss by approximately 3-5 degrees Adding hardener will also slow the speed of cure time slightly Mixing: Add Hardener @ 5-10% by weight or volume (6-12 oz per gallon) and mix thoroughly Pot life: 1-2 hours depending on temperature Marketplace Paints is an authorized dealer for Gemini products.

Read more less

Meoded Concretta FS - Premium Concrete Finish is highly water-resistant and widely used in modern architecture for various structures like shower walls, baths, sinks, countertops, ceilings, and floors, both indoors and outdoors. Crafted from cement and limestone, Concretta is rammed, polished, and sealed for a waterproof surface. It boasts exceptional durability and is easy to apply. Applied as a paste, Concretta features a soft, undulating texture ideal for forming curves and achieving seamless finishes. It can be pigmented to match any color scheme and offers the flexibility of a shiny or matte appearance upon finishing. Meoded Concretta Premium Concrete Finish comes in a base Limestone-Concrete color and can be tinted to almost any color for an extra charge. This plaster is formulated with superb adhesion that allows to apply directly over pre-existing marble/tile with no primer needed. This plaster finish has a seamless, smooth appearance with subtle movement and a luxurious texture. Concretta allows the creation of a variety of different textures giving walls a natural and authentic finish look of concrete. Approx coverage of 12-20sf per 10lb GAL for two coats Working time upon adding water is 45 minutes to 1.5hrs If your project requires less than a bucket for one (1) coat, you may prefer to order in single gallon increments. This way you are able to mix in pre-measured, smaller batches. If you plan to divide the Concretta 5g bucket, you should divide the material by weight.  ALSO, consider changing the single 5g COLOR PACK to 5 individual, single gallon containers of the color selection. We have had a number of customers use this method more successfully with their projects :)  Related Products to purchase: Color Pack(s) will be added at checkout for selected color & size ordered. These should not be removed from the shopping cart. Meoded PlasterGuard must be used to seal SHOWER WALLS Meoded PlasterSeal+ is recommended as a topcoat to PlasterGuard to seal SHOWER FLOORS and Countertop surfaces Meoded Stain Shield can be used as  the sealer outside of the shower area Note: Concretta is shipped dry. It is not pre-mixed to a color because water is added at the time of application. Also, the Color Pack is a plastic jar of water-soluble colorant concentrate and will be found inside the Concretta container.

Read more less